How to: Control Key-Frame Animation Timing
This example shows how to control the timing of key frames within a key-frame animation. Like other animations, key-frame animations have a Duration property. In addition to specifying the duration of an animation, you need to specify what part of that duration is allotted to each of its key frames. To allot the time, you specify a KeyTime for each key frame in the animation.
The KeyTime for each key frame specifies when a key frame ends (it does not specify the length of time a key frame plays). You can specify a KeyTime as a TimeSpan value, as a percentage, or as the Uniform or Paced special value.
Example
The following example uses a DoubleAnimationUsingKeyFrames to animate a rectangle across the screen. The key frames' key times are set with TimeSpan values.
/*
This Rectangle is animated with KeyTimes using TimeSpan Values.
It moves horizontally to 100 in the first 3 seconds, 100 to 300 in
the next second, and 300 to 500 in the last 6 seconds.
*/
// Create the a rectangle.
Rectangle aRectangle = new Rectangle();
aRectangle.Fill = Brushes.Blue;
aRectangle.Stroke = Brushes.Black;
aRectangle.StrokeThickness = 5;
aRectangle.Width = 50;
aRectangle.Height = 50;
// Create a transform to move the rectangle
// across the screen.
TranslateTransform translateTransform1 =
new TranslateTransform();
aRectangle.RenderTransform = translateTransform1;
// Create a DoubleAnimationUsingKeyFrames
// to animate the transform.
DoubleAnimationUsingKeyFrames transformAnimation =
new DoubleAnimationUsingKeyFrames();
transformAnimation.Duration = TimeSpan.FromSeconds(10);
// Animate to 100 at 3 seconds.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(100, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(3))));
// Animate to 300 at 4 seconds.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(300, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(4))));
// Animate to 500 at 10 seconds.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(500, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(10))));
// Start the animation when the rectangle is loaded.
aRectangle.Loaded += delegate(object sender, RoutedEventArgs e)
{
translateTransform1.BeginAnimation(TranslateTransform.XProperty, transformAnimation);
};
'
' This Rectangle is animated with KeyTimes using TimeSpan Values.
' It moves horizontally to 100 in the first 3 seconds, 100 to 300 in
' the next second, and 300 to 500 in the last 6 seconds.
'
' Create the a rectangle.
Dim aRectangle As New Rectangle()
aRectangle.Fill = Brushes.Blue
aRectangle.Stroke = Brushes.Black
aRectangle.StrokeThickness = 5
aRectangle.Width = 50
aRectangle.Height = 50
' Create a transform to move the rectangle
' across the screen.
Dim translateTransform1 As New TranslateTransform()
aRectangle.RenderTransform = translateTransform1
' Create a DoubleAnimationUsingKeyFrames
' to animate the transform.
Dim transformAnimation As New DoubleAnimationUsingKeyFrames()
transformAnimation.Duration = TimeSpan.FromSeconds(10)
' Animate to 100 at 3 seconds.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(100, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(3))))
' Animate to 300 at 4 seconds.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(300, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(4))))
' Animate to 500 at 10 seconds.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(500, KeyTime.FromTimeSpan(TimeSpan.FromSeconds(10))))
' Start the animation when the rectangle is loaded.
AddHandler aRectangle.Loaded, Sub(sender As Object, e As RoutedEventArgs) translateTransform1.BeginAnimation(TranslateTransform.XProperty, transformAnimation)
<!-- This Rectangle is animated with KeyTimes using TimeSpan Values.
It moves horizontally to 100 in the first 3 seconds, 100 to 300 in
the next second, and 300 to 500 in the last 6 seconds. -->
<Rectangle Fill="Blue" Stroke="Black" StrokeThickness="5"
Width="50" Height="50">
<Rectangle.RenderTransform>
<TranslateTransform x:Name="TranslateTransform1" />
</Rectangle.RenderTransform>
<Rectangle.Triggers>
<EventTrigger RoutedEvent="Rectangle.Loaded">
<BeginStoryboard>
<Storyboard>
<DoubleAnimationUsingKeyFrames
Storyboard.TargetName="TranslateTransform1"
Storyboard.TargetProperty="X"
Duration="0:0:10">
<!-- These KeyTime properties are specified as TimeSpan values
which are in the form of "hours:minutes:seconds". -->
<LinearDoubleKeyFrame Value="100" KeyTime="0:0:3" />
<LinearDoubleKeyFrame Value="300" KeyTime="0:0:4" />
<LinearDoubleKeyFrame Value="500" KeyTime="0:0:10" />
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</BeginStoryboard>
</EventTrigger>
</Rectangle.Triggers>
</Rectangle>
The following illustration shows when the value of each key frame is reached.
The next example shows an animation that is identical, except that the key frames' key times are set with percentage values.
/*
This rectangle moves horizontally to 100 in the first 3 seconds,
100 to 300 in the next second, and 300 to 500 in the last 6 seconds.
*/
// Create the a rectangle.
Rectangle aRectangle = new Rectangle();
aRectangle.Fill = Brushes.Purple;
aRectangle.Stroke = Brushes.Black;
aRectangle.StrokeThickness = 5;
aRectangle.Width = 50;
aRectangle.Height = 50;
// Create a transform to move the rectangle
// across the screen.
TranslateTransform translateTransform2 =
new TranslateTransform();
aRectangle.RenderTransform = translateTransform2;
// Create a DoubleAnimationUsingKeyFrames
// to animate the transform.
DoubleAnimationUsingKeyFrames transformAnimation =
new DoubleAnimationUsingKeyFrames();
transformAnimation.Duration = TimeSpan.FromSeconds(10);
// Animate to 100 at 30% of the animation's duration.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(100, KeyTime.FromPercent(0.3)));
// Animate to 300 at 40% of the animation's duration.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(300, KeyTime.FromPercent(0.4)));
// Animate to 500 at 100% of the animation's duration.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(500, KeyTime.FromPercent(1.0)));
// Start the animation when the rectangle is loaded.
aRectangle.Loaded += delegate(object sender, RoutedEventArgs e)
{
translateTransform2.BeginAnimation(TranslateTransform.XProperty, transformAnimation);
};
'
' This rectangle moves horizontally to 100 in the first 3 seconds,
' 100 to 300 in the next second, and 300 to 500 in the last 6 seconds.
'
' Create the a rectangle.
Dim aRectangle As New Rectangle()
aRectangle.Fill = Brushes.Purple
aRectangle.Stroke = Brushes.Black
aRectangle.StrokeThickness = 5
aRectangle.Width = 50
aRectangle.Height = 50
' Create a transform to move the rectangle
' across the screen.
Dim translateTransform2 As New TranslateTransform()
aRectangle.RenderTransform = translateTransform2
' Create a DoubleAnimationUsingKeyFrames
' to animate the transform.
Dim transformAnimation As New DoubleAnimationUsingKeyFrames()
transformAnimation.Duration = TimeSpan.FromSeconds(10)
' Animate to 100 at 30% of the animation's duration.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(100, KeyTime.FromPercent(0.3)))
' Animate to 300 at 40% of the animation's duration.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(300, KeyTime.FromPercent(0.4)))
' Animate to 500 at 100% of the animation's duration.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(500, KeyTime.FromPercent(1.0)))
' Start the animation when the rectangle is loaded.
AddHandler aRectangle.Loaded, Sub(sender As Object, e As RoutedEventArgs) translateTransform2.BeginAnimation(TranslateTransform.XProperty, transformAnimation)
<!-- This rectangle moves horizontally to 100 in the first 3 seconds,
100 to 300 in the next second, and 300 to 500 in the last 6 seconds.-->
<Rectangle Fill="Purple" Stroke="Black" StrokeThickness="5"
Width="50" Height="50">
<Rectangle.RenderTransform>
<TranslateTransform x:Name="TranslateTransform2" />
</Rectangle.RenderTransform>
<Rectangle.Triggers>
<EventTrigger RoutedEvent="Rectangle.Loaded">
<BeginStoryboard>
<Storyboard>
<DoubleAnimationUsingKeyFrames
Storyboard.TargetName="TranslateTransform2"
Storyboard.TargetProperty="X"
Duration="0:0:10">
<!-- KeyTime properties are expressed as Percentages. -->
<LinearDoubleKeyFrame Value="100" KeyTime="30%" />
<LinearDoubleKeyFrame Value="300" KeyTime="40%" />
<LinearDoubleKeyFrame Value="500" KeyTime="100%" />
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</BeginStoryboard>
</EventTrigger>
</Rectangle.Triggers>
</Rectangle>
The following illustration shows when the value of each key frame is reached.
The next example uses Uniform key time values.
/*
This rectangle is animated with KeyTimes using Uniform values.
Goes to 100 in the first 3.3 seconds, 100 to
300 in the next 3.3 seconds, 300 to 500 in the last 3.3 seconds.
*/
// Create the a rectangle.
Rectangle aRectangle = new Rectangle();
aRectangle.Fill = Brushes.Red;
aRectangle.Stroke = Brushes.Black;
aRectangle.StrokeThickness = 5;
aRectangle.Width = 50;
aRectangle.Height = 50;
// Create a transform to move the rectangle
// across the screen.
TranslateTransform translateTransform3 =
new TranslateTransform();
aRectangle.RenderTransform = translateTransform3;
// Create a DoubleAnimationUsingKeyFrames
// to animate the transform.
DoubleAnimationUsingKeyFrames transformAnimation =
new DoubleAnimationUsingKeyFrames();
transformAnimation.Duration = TimeSpan.FromSeconds(10);
/*
KeyTime properties are expressed with values of Uniform. When a key time is set to
"Uniform" the total allotted time of the animation is divided evenly between key frames.
In this example, the total duration of the animation is ten seconds and there are four
key frames each of which are set to "Uniform", therefore, the duration of each key frame
is 3.3 seconds (10/3).
*/
// Animate to 100.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(100, KeyTime.Uniform));
// Animate to 300.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(300, KeyTime.Uniform));
// Animate to 500.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(500, KeyTime.Uniform));
// Start the animation when the rectangle is loaded.
aRectangle.Loaded += delegate(object sender, RoutedEventArgs e)
{
translateTransform3.BeginAnimation(TranslateTransform.XProperty, transformAnimation);
};
'
' This rectangle is animated with KeyTimes using Uniform values.
' Goes to 100 in the first 3.3 seconds, 100 to
' 300 in the next 3.3 seconds, 300 to 500 in the last 3.3 seconds.
'
' Create the a rectangle.
Dim aRectangle As New Rectangle()
aRectangle.Fill = Brushes.Red
aRectangle.Stroke = Brushes.Black
aRectangle.StrokeThickness = 5
aRectangle.Width = 50
aRectangle.Height = 50
' Create a transform to move the rectangle
' across the screen.
Dim translateTransform3 As New TranslateTransform()
aRectangle.RenderTransform = translateTransform3
' Create a DoubleAnimationUsingKeyFrames
' to animate the transform.
Dim transformAnimation As New DoubleAnimationUsingKeyFrames()
transformAnimation.Duration = TimeSpan.FromSeconds(10)
'
' KeyTime properties are expressed with values of Uniform. When a key time is set to
' "Uniform" the total allotted time of the animation is divided evenly between key frames.
' In this example, the total duration of the animation is ten seconds and there are four
' key frames each of which are set to "Uniform", therefore, the duration of each key frame
' is 3.3 seconds (10/3).
'
' Animate to 100.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(100, KeyTime.Uniform))
' Animate to 300.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(300, KeyTime.Uniform))
' Animate to 500.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(500, KeyTime.Uniform))
' Start the animation when the rectangle is loaded.
AddHandler aRectangle.Loaded, Sub(sender As Object, e As RoutedEventArgs) translateTransform3.BeginAnimation(TranslateTransform.XProperty, transformAnimation)
<!-- This rectangle is animated with KeyTimes using Uniform values.
Goes to 100 in the first 3.3 seconds, 100 to
300 in the next 3.3 seconds, 300 to 500 in the last 3.3 seconds. -->
<Rectangle Fill="Red" Stroke="Black" StrokeThickness="5"
Width="50" Height="50">
<Rectangle.RenderTransform>
<TranslateTransform x:Name="TranslateTransform3" />
</Rectangle.RenderTransform>
<Rectangle.Triggers>
<EventTrigger RoutedEvent="Rectangle.Loaded">
<BeginStoryboard>
<Storyboard>
<DoubleAnimationUsingKeyFrames
Storyboard.TargetName="TranslateTransform3"
Storyboard.TargetProperty="X"
Duration="0:0:10">
<!-- KeyTime properties are expressed with values of Uniform. When a key time is set to
"Uniform" the total allotted time of the animation is divided evenly between key frames.
In this example, the total duration of the animation is ten seconds and there are four
key frames each of which are set to "Uniform", therefore, the duration of each key frame
is 3.3 seconds (10/3). -->
<LinearDoubleKeyFrame Value="100" KeyTime="Uniform" />
<LinearDoubleKeyFrame Value="300" KeyTime="Uniform" />
<LinearDoubleKeyFrame Value="500" KeyTime="Uniform" />
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</BeginStoryboard>
</EventTrigger>
</Rectangle.Triggers>
</Rectangle>
The following illustration shows when the value of each key frame is reached.
The final example uses Paced key time values.
/*
This rectangle is animated with KeyTimes using Paced Values.
The rectangle moves between key frames at uniform rate except for first key frame
because using a Paced value on the first KeyFrame in a collection of frames gives a time of zero.
*/
// Create the a rectangle.
Rectangle aRectangle = new Rectangle();
aRectangle.Fill = Brushes.Orange;
aRectangle.Stroke = Brushes.Black;
aRectangle.StrokeThickness = 5;
aRectangle.Width = 50;
aRectangle.Height = 50;
// Create a transform to move the rectangle
// across the screen.
TranslateTransform translateTransform4 =
new TranslateTransform();
aRectangle.RenderTransform = translateTransform4;
// Create a DoubleAnimationUsingKeyFrames
// to animate the transform.
DoubleAnimationUsingKeyFrames transformAnimation =
new DoubleAnimationUsingKeyFrames();
transformAnimation.Duration = TimeSpan.FromSeconds(10);
/*
Use Paced values when a constant rate is desired.
The time allocated to a key frame with a KeyTime of "Paced" is
determined by the time allocated to the other key frames of the animation. This time is
calculated to attempt to give a "paced" or "constant velocity" for the animation.
*/
// Animate to 100.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(100, KeyTime.Paced));
// Animate to 300.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(300, KeyTime.Paced));
// Animate to 500.
transformAnimation.KeyFrames.Add(
new LinearDoubleKeyFrame(500, KeyTime.Paced));
// Start the animation when the rectangle is loaded.
aRectangle.Loaded += delegate(object sender, RoutedEventArgs e)
{
translateTransform4.BeginAnimation(TranslateTransform.XProperty, transformAnimation);
};
'
' This rectangle is animated with KeyTimes using Paced Values.
' The rectangle moves between key frames at uniform rate except for first key frame
' because using a Paced value on the first KeyFrame in a collection of frames gives a time of zero.
'
' Create the a rectangle.
Dim aRectangle As New Rectangle()
aRectangle.Fill = Brushes.Orange
aRectangle.Stroke = Brushes.Black
aRectangle.StrokeThickness = 5
aRectangle.Width = 50
aRectangle.Height = 50
' Create a transform to move the rectangle
' across the screen.
Dim translateTransform4 As New TranslateTransform()
aRectangle.RenderTransform = translateTransform4
' Create a DoubleAnimationUsingKeyFrames
' to animate the transform.
Dim transformAnimation As New DoubleAnimationUsingKeyFrames()
transformAnimation.Duration = TimeSpan.FromSeconds(10)
'
' Use Paced values when a constant rate is desired.
' The time allocated to a key frame with a KeyTime of "Paced" is
' determined by the time allocated to the other key frames of the animation. This time is
' calculated to attempt to give a "paced" or "constant velocity" for the animation.
'
' Animate to 100.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(100, KeyTime.Paced))
' Animate to 300.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(300, KeyTime.Paced))
' Animate to 500.
transformAnimation.KeyFrames.Add(New LinearDoubleKeyFrame(500, KeyTime.Paced))
' Start the animation when the rectangle is loaded.
AddHandler aRectangle.Loaded, Sub(sender As Object, e As RoutedEventArgs) translateTransform4.BeginAnimation(TranslateTransform.XProperty, transformAnimation)
<!-- This rectangle is animated with KeyTimes using Paced Values.
The rectangle moves between key frames at uniform rate except for first key frame
because using a Paced value on the first KeyFrame in a collection of frames gives a time of zero. -->
<Rectangle Fill="Orange" Stroke="Black" StrokeThickness="5"
Width="50" Height="50">
<Rectangle.RenderTransform>
<TranslateTransform x:Name="TranslateTransform4" />
</Rectangle.RenderTransform>
<Rectangle.Triggers>
<EventTrigger RoutedEvent="Rectangle.Loaded">
<BeginStoryboard>
<Storyboard>
<DoubleAnimationUsingKeyFrames
Storyboard.TargetName="TranslateTransform4"
Storyboard.TargetProperty="X"
Duration="0:0:10">
<!-- Use Paced values when a constant rate is desired.
The time allocated to a key frame with a KeyTime of "Paced" is
determined by the time allocated to the other key frames of the animation. This time is
calculated to attempt to give a "paced" or "constant velocity" for the animation. -->
<LinearDoubleKeyFrame Value="100" KeyTime="Paced" />
<LinearDoubleKeyFrame Value="300" KeyTime="Paced" />
<LinearDoubleKeyFrame Value="500" KeyTime="Paced" />
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</BeginStoryboard>
</EventTrigger>
</Rectangle.Triggers>
</Rectangle>
The following illustration shows when the value of each key frame is reached.
For simplicity, the code versions of this example use local animations, not storyboards, because only a single animation is being applied to a single property, but the examples may be modified to use storyboards instead. For an example showing how to declare a storyboard in code, see Animate a Property by Using a Storyboard.
For the complete sample, see KeyFrame Animation Sample. For more information about key frame animations, see the Key-Frame Animations Overview.
See also
Collaborate with us on GitHub
The source for this content can be found on GitHub, where you can also create and review issues and pull requests. For more information, see our contributor guide.
.NET Desktop feedback
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for