DOM cost configuration
This article describes cost configuration for distributed order management (DOM) functionality in Microsoft Dynamics 365 Commerce.
Organizations consider multiple cost components to determine the optimal location to fulfill an order from. Some of these cost components are shipping cost, handling cost, and packaging cost. A combination of these costs is calculated to determine the fulfillment location.
When the first iteration of distributed order management (DOM) in Dynamics 365 Commerce optimized the assignment of orders to fulfillment locations, it only factored in distance. Although distance can be correlated with cost, it isn't the same as cost. For example, an overnight shipping method costs more than three-day shipping or seven-day shipping over the same distance.
The cost configuration feature allows retailers to define and configure additional cost components that are calculated and factored in to determine the optimal location from which to fulfill order lines.
When cost components are configured, the DOM solver only uses the cost definitions to determine the optimal location for order fulfillment. It doesn't consider the distance component as a cost. However, if no cost components are configured, the DOM solver does use the distance component as a cost to determine the optimal location for order fulfillment.
Set up cost components
Two major cost component types can be defined in the system: Shipping and Other.
Both cost component types support multiple calculation bases, as shown in the following table.
| Cost component type | Calculation basis |
|---|---|
| Shipping |
|
| Other |
|
Shipping cost component type
This section explains how to set up each combination of the Shipping cost component type and a calculation basis for shipping costs, and how the DOM solver uses each combination.
Cost component type = Shipping and Calculation basis = Simple
If a combination of the Shipping cost component type and the Simple calculation basis is used, the shipping cost for a mode of delivery is based on either a flat cost or distance.
You must set up the following fields for this combination:
- Cost factor – Enter a unique identifier for the cost factor.
- Description – Enter the name and description of the cost factor.
- Start date and End date – Use these fields to limit the cost factor for a specific date range. If you leave these fields blank, the cost factor is valid for an indefinite period.
- Active – Indicate whether the cost factor is active. DOM only considers active cost factors associated with the fulfillment profile.
- Company – Specify the legal entity for which the cost factor is configured. All lines of the calculation criteria must be for the same legal entity.
- Modes of delivery – Specify the modes of delivery for which the cost is configured.
- Calculation type – Specify how the cost should be calculated for a specific mode of delivery. Two calculation types are supported:
- Fixed – A flat cost is used for the mode of delivery. If you select this calculation type, the Cost value defines the flat cost.
- Per-distance unit – The cost for the mode of delivery is calculated as the specified Cost value multiplied by the distance between the delivery address and the locations.
- Cost – Specify the cost value that is used in conjunction with the Calculation type value to compute the cost for a mode of delivery.
Cost component type = Shipping and Calculation basis = Tiered
If a combination of the Shipping cost component type and the Tiered calculation basis is used, the shipping cost for a mode of delivery is based on either a flat cost or distance. However, for this combination the distance is based on a tiered range of distances.
You must set up the following fields for this combination:
- Cost factor – Enter a unique identifier for the cost factor.
- Description – Enter the name and description of the cost factor.
- Default cost – Specify the cost that should be used for a mode of delivery if the distance between the delivery address and the location doesn't fall into any of the tiered distances for the mode of delivery.
- Start date and End date – Use these fields to limit the cost factor for a specific date range. If you leave these fields blank, the cost factor is valid for an indefinite period.
- Active – Indicate whether the cost factor is active. DOM only considers active cost factors associated with the fulfillment profile.
- Company – Specify the legal entity for which the cost factor is configured. All lines of the calculation criteria must be for the same legal entity.
- Modes of delivery – Specify the modes of delivery for which the cost is configured.
- Distance type – Specify whether the tiered distance definition is an aerial distance or a road distance.
- Distance units – Specify the unit that the tiered distance is measured in.
- Distance from – Specify the start range for the tiered distance.
- Distance to – Specify the end range for the tiered distance.
- Calculation type – Specify how the cost should be calculated for a specific mode of delivery and tiered distance. Two calculation types are supported:
- Fixed – A flat cost is used for the mode of delivery. If you select this calculation type, the Cost value defines the flat cost.
- Per distance unit – The cost for the mode of delivery and tiered distance is calculated as the specified Cost value multiplied by the distance between the delivery address and the locations.
- Cost – Specify the cost value that is used in conjunction with the Calculation type value to compute the cost for a mode of delivery.
Note
- When you define tiered distances, the system validates that there are no missing or overlapping distances.
- The distance type that is used for a mode of delivery must be the same across all the tiered distances.
Other cost component type
This section explains how to set up each combination of the Other cost component type and another cost type for non-shipping costs, and how the DOM solver uses each combination.
Cost component type = Other and Other cost type = Sales order
A combination of the Other cost component type and the Sales order other cost type is used to define non-shipping costs at the sales order level.
You must set up the following fields for this combination:
- Cost factor – Enter a unique identifier for the cost factor.
- Description – Enter the name and description of the cost factor.
- Start date and End date – Use these fields to limit the cost factor for a specific date range. If you leave these fields blank, the cost factor is valid for an indefinite period.
- Active – Indicate whether the cost factor is active. DOM only considers active cost factors associated with the fulfillment profile.
- Cost – Specify the cost value for a non-shipping cost at the sales order level.
Cost component type = Other and Other cost type = Sales line
A combination of the Other cost component type and the Sales line other cost type is used to define non-shipping costs at the sales order line level.
You must set up the following fields for this combination:
- Cost factor – Enter a unique identifier for the cost factor.
- Description – Enter the name and description of the cost factor.
- Start date and End date – Use these fields to limit the cost factor for a specific date range. If you leave these fields blank, the cost factor is valid for an indefinite period.
- Active – Indicate whether the cost factor is active. DOM only considers active cost factors associated with the fulfillment profile.
- Cost – Specify the cost value for a non-shipping cost at the sales order line level.
Cost component type = Other and Other cost type = Location
A combination of the Other cost component type and the Location other cost type is used to define non-shipping costs for a group of locations or an individual location.
You must set up the following fields for this combination:
Cost factor – Enter a unique identifier for the cost factor.
Description – Enter the name and description of the cost factor.
Start date and End date – Use these fields to limit the cost factor for a specific date range. If you leave these fields blank, the cost factor is valid for an indefinite period.
Active – Indicate whether the cost factor is active. DOM only considers active cost factors associated with the fulfillment profile.
Fulfillment group – Specify the group of locations for which the non-shipping cost is defined.
Fulfillment location – Specify the location for which the non-shipping cost is defined.
Note
You can't specify a fulfillment group and a fulfillment location on the same line as location-based calculation criteria.
Cost – Specify the cost value for a non-shipping cost at the fulfillment group level or fulfillment location level.
Important
For DOM to consider these costs when it's run, you must add the cost factor to the relevant fulfillment profile.
Additional resources
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for