Disable Basic authentication in Exchange Online

Important

Effective from December 2022, the classic Exchange Admin Center was deprecated for worldwide customers. Microsoft recommends using the new Exchange Admin Center, if not already doing so.

While most of the features have been migrated to new EAC, some have been migrated to other admin centers and remaining ones will soon be migrated to New EAC. Find features that are not yet there in new EAC at Other Features or use Global Search that will help you navigate across new EAC.

Note

If you've enabled security defaults in your organization, Basic authentication is already disabled in Exchange Online. For more information, see Security defaults in Microsoft Entra ID.

If you've reached this page because Basic authentication isn't working in your tenant, and you haven't set up security defaults or authentication policies, then we might have disabled Basic authentication in your tenant as part of our wider program to improve security across Exchange Online. Check your Message Center for any posts referring to Basic authentication, and read Basic Authentication and Exchange Online for the latest announcements concerning Basic authentication.

Basic authentication in Exchange Online uses a username and a password for client access requests. Blocking Basic authentication can help protect your Exchange Online organization from brute force or password spray attacks. When you disable Basic authentication for users in Exchange Online, their email clients and apps must support modern authentication. Those clients are:

If your organization has no legacy email clients, you can use authentication policies in Exchange Online to disable Basic authentication requests. Disabling Basic authentication forces all client access requests to use modern authentication. For more information about modern authentication, see Using modern authentication with Office clients.

This topic explains how Basic authentication is used and blocked in Exchange Online, and the corresponding procedures for authentication policies.

How Basic authentication works in Exchange Online

Basic authentication is also known as proxy authentication because the email client transmits the username and password to Exchange Online, and Exchange Online forwards or proxies the credentials to an authoritative identity provider (IdP) on behalf of the email client or app. The IdP depends your organization's authentication model:

  • Cloud authentication: The IdP is Microsoft Entra ID.
  • Federated authentication: The IdP is an on-premises solution like Active Directory Federation Services (AD FS).

These authentication models are described in the following sections. For more information, see Choose the right authentication method for your Microsoft Entra hybrid identity solution.

Cloud authentication

The steps in cloud authentication are described in the following diagram:

Basic steps for cloud-based authentication, and where Basic authentication is blocked.

  1. The email client sends the username and password to Exchange Online.

    Note: When Basic authentication is blocked, it's blocked at this step.

  2. Exchange Online sends the username and password to Microsoft Entra ID.

  3. Microsoft Entra ID returns a user ticket to Exchange Online and the user is authenticated.

Federated authentication

The steps in federated authentication are described in the following diagram:

Basic steps for federated authentication, and where Basic authentication is blocked.

  1. The email client sends the username and password to Exchange Online.

    Note: When Basic authentication is blocked, it's blocked at this step.

  2. Exchange Online sends the username and password to the on-premises IdP.

  3. Exchange Online receives a Security Assertion Markup Language (SAML) token from the on-premises IdP.

  4. Exchange Online sends the SAML token to Microsoft Entra ID.

  5. Microsoft Entra ID returns a user ticket to Exchange Online and the user is authenticated.

How Basic authentication is blocked in Exchange Online

You block Basic authentication in Exchange Online by creating and assigning authentication policies to individual users. The policies define the client protocols where Basic authentication is blocked, and assigning the policy to one or more users blocks their Basic authentication requests for the specified protocols.

When it's blocked, Basic authentication in Exchange Online is blocked at the first pre-authentication step (Step 1 in the previous diagrams) before the request reaches Microsoft Entra ID or the on-premises IdP. The benefit of this approach is brute force or password spray attacks won't reach the IdP (which might trigger account lock-outs due to incorrect login attempts).

Because authentication policies operate at the user level, Exchange Online can only block Basic authentication requests for users that exist in the cloud organization. For federated authentication, if a user doesn't exist in Exchange Online, the username and password are forwarded to the on-premises IdP. For example, consider the following scenario:

  1. An organization has the federated domain contoso.com and uses on-premises AD FS for authentication.

  2. The user ian@contoso.com exists in the on-premises organization, but not in Office 365 or Microsoft 365 (there's no user account in Microsoft Entra ID and no recipient object in the Exchange Online global address list).

  3. An email client sends a login request to Exchange Online with the username ian@contoso.com. An authentication policy can't be applied to the user, and the authentication request for ian@contoso.com is sent to the on-premises AD FS.

  4. The on-premises AD FS can either accept or reject the authentication request for ian@contoso.com. If the request is accepted, a SAML token is returned to Exchange Online. As long as the SAML token's ImmutableId value matches a user in Microsoft Entra ID, Microsoft Entra ID will issue a user ticket to Exchange Online (the ImmutableId value is set during Microsoft Entra Connect setup).

In this scenario, if contoso.com uses on-premises AD FS server for authentication, the on-premises AD FS server will still receive authentication requests for non-existent usernames from Exchange Online during a password spray attack.

In an Exchange hybrid deployment, authentication for your on-premises mailboxes will be handled by your on-premises Exchange servers, and authentication policies won't apply. For mailboxes moved to Exchange Online, the Autodiscover service will redirect them to Exchange Online, and then some of the previous scenarios will apply.

Authentication policy procedures in Exchange Online

You manage all aspects of authentication policies in Exchange Online PowerShell. The protocols and services in Exchange Online that you can block Basic authentication for are described in the following table.

Protocol or service Description Parameter name
Exchange Active Sync (EAS) Used by some email clients on mobile devices. AllowBasicAuthActiveSync
Autodiscover Used by Outlook and EAS clients to find and connect to mailboxes in Exchange Online AllowBasicAuthAutodiscover
IMAP4 Used by IMAP email clients. AllowBasicAuthImap
MAPI over HTTP (MAPI/HTTP) Used by Outlook 2010 and later. AllowBasicAuthMapi
Offline Address Book (OAB) A copy of address list collections that are downloaded and used by Outlook. AllowBasicAuthOfflineAddressBook
Outlook Service Used by the Mail and Calendar app for Windows 10. AllowBasicAuthOutlookService
POP3 Used by POP email clients. AllowBasicAuthPop
Reporting Web Services Used to retrieve report data in Exchange Online. AllowBasicAuthReportingWebServices
Outlook Anywhere (RPC over HTTP) Used by Outlook 2016 and earlier. AllowBasicAuthRpc
Authenticated SMTP Used by POP and IMAP clients to send email messages. AllowBasicAuthSmtp
Exchange Web Services (EWS) A programming interface that's used by Outlook, Outlook for Mac, and third-party apps. AllowBasicAuthWebServices
PowerShell Used to connect to Exchange Online with remote PowerShell. For instructions, see Connect to Exchange Online PowerShell. AllowBasicAuthPowerShell

Typically, when you block Basic authentication for a user, we recommend that you block Basic authentication for all protocols. However, you can use the AllowBasicAuth* parameters (switches) on the New-AuthenticationPolicy and Set-AuthenticationPolicy cmdlets to selectively allow or block Basic authentication for specific protocols.

For email clients and apps that don't support modern authentication, you need to allow Basic authentication for the protocols and services that they require. These protocols and services are described in the following table:

Client Protocols and services
Older EWS clients
  • Autodiscover
  • EWS
Older ActiveSync clients
  • Autodiscover
  • ActiveSync
POP clients
  • POP3
  • Authenticated SMTP
IMAP clients
  • IMAP4
  • Authenticated SMTP
Outlook 2010
  • Autodiscover
  • MAPI over HTTP
  • Offline Address Book
  • Outlook Anywhere (RPC over HTTP)
  • Exchange Web Services (EWS)

Note

Blocking Basic authentication will block app passwords in Exchange Online. For more information about app passwords, see Create an app password.

What do you need to know before you begin?

Create and apply authentication policies

The steps to create and apply authentication policies to block Basic authentication in Exchange Online are:

  1. Create the authentication policy.

  2. Assign the authentication policy to users.

  3. Wait 24 hours for the policy to be applied to users, or force the policy to be immediately applied.

These steps are described in the following sections.

Step 1: Create the authentication policy

To create a policy that blocks Basic authentication for all available client protocols in Exchange Online (the recommended configuration), use the following syntax:

New-AuthenticationPolicy -Name "<Descriptive Name>"

This example creates an authentication policy named Block Basic Auth.

New-AuthenticationPolicy -Name "Block Basic Auth"

For detailed syntax and parameter information, see New-AuthenticationPolicy.

Notes:

  • You can't change the name of the policy after you create it (the Name parameter isn't available on the Set-AuthenticationPolicy cmdlet).

  • To enable Basic authentication for specific protocols in the policy, see the Modify authentication policies section later in this topic. The same protocol settings are available on the New-AuthenticationPolicy and Set-AuthenticationPolicy cmdlets, and the steps to enable Basic authentication for specific protocols are the same for both cmdlets.

Step 2: Assign the authentication policy to users

The methods that you can use to assign authentication policies to users are described in this section:

  • Individual user accounts: Use the following syntax:

    Set-User -Identity <UserIdentity> -AuthenticationPolicy <PolicyIdentity>
    

    This example assigns the policy named Block Basic Auth to the user account laura@contoso.com.

    Set-User -Identity laura@contoso.com -AuthenticationPolicy "Block Basic Auth"
    
  • Filter user accounts by attributes: This method requires that the user accounts all share a unique filterable attribute (for example, Title or Department) that you can use to identify the users. The syntax uses the following commands (two to identify the user accounts, and the other to apply the policy to those users):

    $<VariableName1> = Get-User -ResultSize unlimited -Filter <Filter>
    $<VariableName2> = $<VariableName1>.MicrosoftOnlineServicesID
    $<VariableName2> | foreach {Set-User -Identity $_ -AuthenticationPolicy "Block Basic Auth"}
    

    This example assigns the policy named Block Basic Auth to all user accounts whose Title attribute contains the value "Sales Associate".

    $SalesUsers = Get-User -ResultSize unlimited -Filter "(RecipientType -eq 'UserMailbox') -and (Title -like '*Sales Associate*')"
    $Sales = $SalesUsers.MicrosoftOnlineServicesID
    $Sales | foreach {Set-User -Identity $_ -AuthenticationPolicy "Block Basic Auth"}
    
  • Use a list of specific user accounts: This method requires a text file to identify the user accounts. Values that don't contain spaces (for example, the Office 365 or Microsoft 365 work or school account) work best. The text file must contain one user account on each line like this:

    akol@contoso.com
    tjohnston@contoso.com
    kakers@contoso.com

    The syntax uses the following two commands (one to identify the user accounts, and the other to apply the policy to those users):

    $<VariableName> = Get-Content "<text file>"
    $<VariableName> | foreach {Set-User -Identity $_ -AuthenticationPolicy <PolicyIdentity>}
    

    This example assigns the policy named Block Basic Auth to the user accounts specified in the file C:\My Documents\BlockBasicAuth.txt.

    $BBA = Get-Content "C:\My Documents\BlockBasicAuth.txt"
    $BBA | foreach {Set-User -Identity $_ -AuthenticationPolicy "Block Basic Auth"}
    
  • Filter on-premises Active Directory user accounts that are synchronized to Exchange Online: For details, see the Filter on-premises Active Directory user accounts that are synchronized to Exchange Online section in this topic.

Note

To remove the policy assignment from users, use the value $null for the AuthenticationPolicy parameter on the Set-User cmdlet.

Step 3: (Optional) Immediately apply the authentication policy to users

By default, when you create or change the authentication policy assignment on users or update the policy, the changes take effect within 24 hours. If you want the policy to take effect within 30 minutes, use the following syntax:

Set-User -Identity <UserIdentity> -STSRefreshTokensValidFrom $([System.DateTime]::UtcNow)

This example immediately applies the authentication policy to the user laura@contoso.com.

Set-User -Identity laura@contoso.com -STSRefreshTokensValidFrom $([System.DateTime]::UtcNow)

This example immediately applies the authentication policy to multiple users that were previously identified by filterable attributes or a text file. This example works if you're still in the same PowerShell session and you haven't changed the variables you used to identify the users (you didn't use the same variable name afterwards for some other purpose). For example:

$Sales | foreach {Set-User -Identity $_ -STSRefreshTokensValidFrom $([System.DateTime]::UtcNow)}

or

$BBA | foreach {Set-User -Identity $_ -STSRefreshTokensValidFrom $([System.DateTime]::UtcNow)}

View authentication policies

To view a summary list of the names of all existing authentication policies, run the following command:

Get-AuthenticationPolicy | Format-Table Name -Auto

To view detailed information about a specific authentication policy, use this syntax:

Get-AuthenticationPolicy -Identity <PolicyIdentity>

This example returns detailed information about the policy named Block Basic Auth.

Get-AuthenticationPolicy -Identity "Block Basic Auth"

For detailed syntax and parameter information, see Get-AuthenticationPolicy.

Modify authentication policies

By default, when you create a new authentication policy without specifying any protocols, Basic authentication is blocked for all client protocols in Exchange Online. In other words, the default value of the AllowBasicAuth* parameters (switches) is False for all protocols.

  • To enable Basic authentication for a specific protocol that's disabled, specify the switch without a value.

  • To disable Basic authentication for a specific protocol that's enabled, you can only use the value :$false.

You can use the Get-AuthenticationPolicy cmdlet to see the current status of the AllowBasicAuth* switches in the policy.

This example enables basic authentication for the POP3 protocol and disables basic authentication for the IMAP4 protocol in the existing authentication policy named Block Basic Auth.

Set-AuthenticationPolicy -Identity "Block Basic Auth" -AllowBasicAuthPop -AllowBasicAuthImap:$false

For detailed syntax and parameter information, see Set-AuthenticationPolicy.

Configure the default authentication policy

The default authentication policy is assigned to all users who don't already have a specific policy assigned to them. Note that the authentication policies assigned to users take precedence over the default policy. To configure the default authentication policy for the organization, use this syntax:

Set-OrganizationConfig -DefaultAuthenticationPolicy <PolicyIdentity>

This example configures the authentication policy named Block Basic Auth as the default policy.

Set-OrganizationConfig -DefaultAuthenticationPolicy "Block Basic Auth"

Note

To remove the default authentication policy designation, use the value $null for the DefaultAuthenticationPolicy parameter.

Use the following example to verify that a default authentication policy is configured.

Get-OrganizationConfig | Format-Table DefaultAuthenticationPolicy

Remove authentication policies

To remove an existing authentication policy, use this syntax:

Remove-AuthenticationPolicy -Identity <PolicyIdentity>

This example removes the policy named Test Auth Policy.

Remove-AuthenticationPolicy -Identity "Test Auth Policy"

For detailed syntax and parameter information, see Remove-AuthenticationPolicy.

How do you know that you've successfully disabled Basic authentication in Exchange Online?

To confirm that an authentication policy was directly applied to users:

Note

Take into account that a default authentication policy could be already configured. See Configure the default authentication policy for details.

  1. Run the following command to find the distinguished name (DN) value of the authentication policy:

    Get-AuthenticationPolicy | Format-List Name,DistinguishedName
    
  2. Use the DN value of the authentication policy in the following command:

    Get-User -Filter "AuthenticationPolicy -eq '<AuthPolicyDN>'"
    

    For example:

    Get-User -Filter "AuthenticationPolicy -eq 'CN=Block Basic Auth,CN=Auth Policies,CN=Configuration,CN=contoso.onmicrosoft.com,CN=ConfigurationUnits,DC=NAMPR11B009,DC=PROD,DC=OUTLOOK,DC=COM'"
    

When an authentication policy blocks Basic authentication requests from a specific user for a specific protocol in Exchange Online, the response is 401 Unauthorized. No additional information is returned to the client to avoid leaking any additional information about the blocked user. An example of the response looks like this:

HTTP/1.1 401 Unauthorized
Server: Microsoft-IIS/10.0
request-id: 413ee498-f337-4b0d-8ad5-50d900eb1f72
X-CalculatedBETarget: DM5PR2101MB0886.namprd21.prod.outlook.com
X-BackEndHttpStatus: 401
Set-Cookie: MapiRouting=#################################################; path=/mapi/; secure; HttpOnly
X-ServerApplication: Exchange/15.20.0485.000
X-RequestId: {3146D993-9082-4D57-99ED-9E7D5EA4FA56}:8
X-ClientInfo: {B0DD130A-CDBF-4CFA-8041-3D73B4318010}:59
X-RequestType: Bind
X-DiagInfo: DM5PR2101MB0886
X-BEServer: DM5PR2101MB0886
X-Powered-By: ASP.NET
X-FEServer: MA1PR0101CA0031
WWW-Authenticate: Basic Realm="",Basic Realm=""
Date: Wed, 31 Jan 2018 05:15:08 GMT
Content-Length: 0

Manage Basic authentication in the Microsoft 365 admin center

In the Microsoft 365 admin center at https://admin.microsoft.com, go Settings > Org Settings > Modern Authentication. In the Modern authentication flyout that appears, you can identify the protocols that no longer require Basic authentication.

Behind the scenes, these settings use authentication policies. If authentication policies were created in the past, modifying any of these selections will automatically create the first new authentication policy. This policy is visible only through PowerShell. For advanced customers that may already be using authentication policies, changes in the Microsoft 365 admin center will modify their existing default policy. Look through Microsoft Entra sign-in logs to see which protocols that clients are using before making any changes.

Turning off Basic authentication in the Microsoft 365 admin center does not turn off the following legacy services:

  • AllowBasicAuthOutlookService
  • AllowBasicAuthReportingWebServices

You can only turn off these settings in Exchange Online PowerShell.

  1. Run the following command to find the name of the existing authentication policy:

    Get-AuthenticationPolicy
    
  2. Replace <AuthenticationPolicyName> with the value from the previous step, and then run the following command:

    Set-AuthenticationPolicy -Identity "<AuthenticationPolicyName>" -AllowBasicAuthReportingWebServices:$false -AllowBasicAuthOutlookService:$false
    
  3. The previous command affects any new mailboxes that you'll create, but not existing mailboxes. To apply the policy to existing mailboxes, use the <AuthenticationPolicyName> value in the following command:

    $mbx = Get-Mailbox -RecipientTypeDetails UserMailbox -ResultSize unlimited
    $mbx | foreach {Set-User -Identity $_.ExchangeObjectID.tostring() -AuthenticationPolicy <AuthenticationPolicyName>}
    

Filter on-premises Active Directory user accounts that are synchronized to Exchange Online

This method uses one specific attribute as a filter for on-premises Active Directory group members that will be synchronized with Exchange Online. This method allows you to disable legacy protocols for specific groups without affecting the entire organization.

Throughout this example, we'll use the Department attribute, because it's a common attribute that identifies users based on their department and role. To see all Active Directory user extended properties, go to Active Directory: Get-ADUser Default and Extended Properties.

Step 1: Find the Active Directory users and set the Active Directory user attributes

Get the members of an Active Directory group

These steps require the Active Directory module for Windows PowerShell. To install this module on your PC, you need to download and install the Remote Server Administration Tools (RSAT).

Run the following command in Active Directory PowerShell to return all groups in Active Directory:

Get-ADGroup -Filter * | select -Property Name

After you get the list of groups, you can query which users belong to those groups and create a list based on any of their attributes. We recommend using the objectGuid attribute because the value is unique for each user.

Get-ADGroupMember -Identity "<GroupName>" | select -Property objectGuid

This example returns the objectGuid attribute value for the members of the group named Developers.

Get-ADGroupMember -Identity "Developers" | select -Property objectGuid

Set the filterable user attribute

After you identify the Active Directory group that contains the users, you need to set the attribute value that will be synchronized with Exchange Online to filter users (and ultimately disable Basic authentication for them).

Use the following syntax in Active Directory PowerShell to configure the attribute value for the members of the group that you identified in the previous step. The first command identifies the group members based on their objectGuid attribute value. The second command assigns the Department attribute value to the group members.

$variable1 = Get-ADGroupMember -Identity "<GroupName>" | select -ExpandProperty "objectGUID"; Foreach ($user in $variable1) {Set-ADUser -Identity $user.ToString() -Add@{Department="<DepartmentName>"}}

This example sets the Department attribute to the value "Developer" for users that belong to the group named "Developers".

$variable1 = Get-ADGroupMember -Identity "Developers" | select -ExpandProperty "objectGUID"; Foreach ($user in $variable1) {Set-ADUser -Identity $user.ToString() -Add@{Department="Developer"}}

Use the following syntax in Active Directory PowerShell to verify the attribute was applied to the user accounts (now or in the past):

Get-ADUser -Filter "Department -eq '<DepartmentName>'" -Properties Department

This example returns all user accounts with the value "Developer" for the Department attribute.

Get-ADUser -Filter "Department -eq 'Developer'" -Properties Department

Step 2: Disable legacy authentication in Exchange Online

Note

The attribute values for on-premises users are synchronized to Exchange Online only for users that have a valid Exchange Online license. For more information, see Add users individually or in bulk.

The Exchange Online PowerShell syntax uses the following commands (two to identify the user accounts, and the other to apply the policy to those users):

$<VariableName1> = Get-User -ResultSize unlimited -Filter <Filter>
$<VariableName2> = $<VariableName1>.MicrosoftOnlineServicesID
$<VariableName2> | foreach {Set-User -Identity $_ -AuthenticationPolicy "Block Basic Auth"}

This example assigns the policy named Block Basic Auth to all synchronized user accounts whose Department attribute contains the value "Developer".

$developerUsers = Get-User -ResultSize unlimited -Filter "(RecipientType -eq 'UserMailbox') -and (department -like '*developer*')"
$developers = $developerUsers.MicrosoftOnlineServicesID
$developers | foreach {Set-User -Identity $_ -AuthenticationPolicy "Block Basic Auth"}

If you connect to Exchange Online PowerShell in an Active Directory PowerShell session, you can use the following syntax to apply the policy to all members of an Active Directory group.

This example creates a new authentication policy named Marketing Policy that disables Basic authentication for members of the Active Directory group named Marketing Department for ActiveSync, POP3, authenticated SMTP, and IMAP4 clients.

Note

A known limitation in Active Directory PowerShell prevents the Get-AdGroupMember cmdlet from returning more than 5000 results. Therefore, the following example only works for Active Directory groups that have less than 5000 members.

New-AuthenticationPolicy -Name "Marketing Policy" -AllowBasicAuthActiveSync $false -AllowBasicAuthPop $false -AllowBasicAuthSmtp $false -AllowBasicAuthImap $false
$users = Get-ADGroupMember "Marketing Department"
foreach ($user in $users) {Set-User -Identity $user.SamAccountName -AuthenticationPolicy "Marketing Policy"}