Connect to Cellular and 5G
HoloLens 2 supports two methods for connecting to cellular and 5G networks:
- An ad hoc WiFi network provided by the cellular device, commonly referred to as a "Hotspot"
- Limited support for USB-C tethered devices
Most cellular connectivity needs can be met with a hotspot. HoloLens 2 WiFi supports 802.11ac, which can provide the bandwidth and latency requirements necessary for most common use cases. WiFi is also cable-free and offers compatibility with the largest number of cellular devices.
- Consult your device's manual on how to enable its hotspot mode.
- Enable hotspot mode, supplying a name for the network and a known password.
- In HoloLens 2 Network settings, locate the WiFi network created in step 2 and join it.
USB-C tethering can provide lower latency for advanced workloads that need it. Azure Remote Rendering, for example, can benefit from tethering. Tethering requires a cable between the cellular device and HoloLens, and tethering is supported by a limited number of devices.
A limited number of devices that present themselves as an ethernet adaptor can be used with Windows Holographic version 2004 and later.
Devices that don't present themselves as an ethernet adapter must support the generic Microsoft RNDIS driver. But, only a limited number of those devices are compatible with HoloLens 2. Consult your device's manufacturer for details on whether it supports the generic Microsoft RNDIS driver.
Devices that aren't RNDIS compatible, or require a driver or application to be installed, aren't supported.
While Microsoft doesn't maintain a list of compatible devices, there's a community discussion on the topic here.
- Consult your device's manual on how to enable data sharing over USB. This setting is often referred to as "USB Tethering", "Data Sharing" or "USB Modem".
- Enable data sharing over USB.
- Connect your device to the HoloLens USB-C port.
- In HoloLens 2 Network settings, the device will automatically appear as an Ethernet connection.