Collect eDiscovery diagnostic information

Tip

eDiscovery (preview) is now available in the new Microsoft Purview portal. To learn more about using the new eDiscovery experience, see Learn about eDiscovery (preview).

Occasionally Microsoft Support engineers require specific information about your issue when you open a support case related to Microsoft Purview eDiscovery (Standard) or Microsoft Purview eDiscovery (Premium). This article provides guidance on how to collect diagnostic information to help support engineers investigate and resolve issues. Typically, you don't need to collect this information until asked to do so by a Microsoft Support engineer.

Important

The output from the cmdlets and diagnostic information described in this article may include sensitive information about litigation or internal investigations in your organization. Before sending the raw diagnostic information to Microsoft Support, you should review the information and redact any sensitive information (such as names or other information about parties to litigation or investigation) by replacing it with XXXXXXX. Using this method will also indicate to the Microsoft Support engineer that information was redacted.

Tip

If you're not an E5 customer, use the 90-day Microsoft Purview solutions trial to explore how additional Purview capabilities can help your organization manage data security and compliance needs. Start now at the Microsoft Purview compliance portal trials hub. Learn details about signing up and trial terms.

Collect diagnostic information for eDiscovery (Standard)

Collecting diagnostic information for eDiscovery (Standard) is cmdlet-based, so you'll have to use Security & Compliance PowerShell. The following PowerShell examples will run cmdlets and then save the output to a specified text file. In most support cases, you should only have to run one of these commands.

To run the following cmdlets, connect to Security & Compliance PowerShell. After you're connected, run one or more of the following commands and be sure to replace placeholders with the actual object names.

After reviewing the generated text file and redacting sensitive information, send it to the Microsoft Support engineer working on your case.

Note

You can also run the commands in this section to collect diagnostic information for the searches and exports listed on the Content search page in the Microsoft Purview compliance portal.

Collect information about searches

The following command collects information that's helpful when investigating issues with a Content search or a search associated with a eDiscovery (Standard) case.

Get-ComplianceSearch "<Search name>" | FL > "ComplianceSearch.txt"

Collect information about search actions

The following command collects information to investigate problems with previewing, exporting, or purging the results of a Content search or a search associated with a eDiscovery (Standard) case. You can identify the name of the search action by selecting an export that's listed on the Exports tab. To identify the names of preview and purge actions, you can run the Get-ComplianceSearchAction cmdlet to display a list of all actions. The format for the search action name is constructed by appending _Preview, _Export, or _Purge to the name of the corresponding search.

Get-ComplianceSearchAction "<Search action name>" | FL > "ComplianceSearchAction.txt"

Collect information about eDiscovery holds

When an eDiscovery hold associated with a eDiscovery (Standard) case isn't functioning as expected, run the following command to collect information about the Case Hold Policy and associated Case Hold Rule for the eDiscovery hold. The Case hold policy name in the following command is the same as the name of the eDiscovery hold. You can identify this name on the Holds tabs in the eDiscovery (Standard) case.

Get-CaseHoldPolicy "<Case hold policy name>" | %{"--CaseHoldPolicy--";$_|FL;"--CaseHoldRule--";Get-CaseHoldRule -Policy $_.Name | FL} > "eDiscoveryCaseHold.txt"

Collect all case information

Sometimes, it's not apparent what information is required by Microsoft Support to investigate your issue. In this situation, you can collect all of the diagnostics information for a eDiscovery (Standard) case. The eDiscovery (Standard) case name in the following command is the same as the name of a case that's displayed on the eDiscovery (Standard) page in the compliance portal.

Get-ComplianceCase "<eDiscovery (Standard) case name>"| %{$_|fl;"`t==Searches==";Get-ComplianceSearch -Case $_.Name | FL;"`t==Search Actions==";Get-ComplianceSearchAction -Case $_.Name |FL;"`t==Holds==";Get-CaseHoldPolicy -Case $_.Name | %{$_|FL;"`t`t ==$($_.Name) Rules==";Get-CaseHoldRule -Policy $_.Name | FL}} > "eDiscoveryCase.txt"

Collect diagnostic information for eDiscovery (Premium)

Collect case information

The Settings tab in an eDiscovery (Premium) case lets you quickly copy the diagnostic information for the case. The diagnostic information is saved to the clipboard so you can paste it to a text file and send to Microsoft Support.

Note

For a limited time, this classic eDiscovery experience is also available in the new Microsoft Purview portal. Enable Compliance portal classic eDiscovery experience in eDiscovery (preview) experience settings to display the classic experience in the new Microsoft Purview portal.

  1. Go to the compliance portal, and select eDiscovery > Advanced.
  2. Select a case and then select the Settings tab.
  3. Under Case Information, select Select.
  4. On the flyout page, select Actions > Copy support information to copy the information to the clipboard.
  5. Open a text file (in Notepad) and then paste the information in the text file.
  6. Save the text file and name it something like eDP Diagnostic Info YYYY.MM.DD (for example, eDP Diagnostic Info 2020.11.03).

After reviewing the file and redacting sensitive information, send it to the Microsoft Support engineer working on your case.

Collect job information

Note

For a limited time, this classic eDiscovery experience is also available in the new Microsoft Purview portal. Enable Compliance portal classic eDiscovery experience in eDiscovery (preview) experience settings to display the classic experience in the new Microsoft Purview portal.

  1. While in a case, select the Jobs tab.
  2. Scroll down to the Job that failed and select it to open the job information pane.
  3. Select Copy support information to copy the job diagnostics information to the clipboard.
  4. Open a text file (in Notepad) and then paste the information into the text file.
  5. Save the text file and name it something like eDP Job Diagnostic Info YYYY.MM.DD (for example, eDP Diagnostic Info 2020.11.03).

After reviewing the file and redacting sensitive information, send it to the Microsoft Support engineer working on your case.