2.2.10.10.3 ClassInfoDataBlock
Specifies the properties of the type information of the embedded control that are 4 bytes or smaller and are not set to the file format defaults. If the corresponding bit in the PropMask of the SiteClassInfo that contains this ClassInfoDataBlock is set to zero, the field MUST NOT be stored in the file.
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ClassTableFlags (optional) |
VarFlags (optional) |
||||||||||||||||||||||||||||||
|
CountOfMethods (optional) |
|||||||||||||||||||||||||||||||
|
DispidBind (optional) |
|||||||||||||||||||||||||||||||
|
GetBindIndex (optional) |
PutBindIndex (optional) |
||||||||||||||||||||||||||||||
|
BindType (optional) |
GetValueIndex (optional) |
||||||||||||||||||||||||||||||
|
PutValueIndex (optional) |
ValueType (optional) |
||||||||||||||||||||||||||||||
|
Padding1 (variable) |
|||||||||||||||||||||||||||||||
|
... |
|||||||||||||||||||||||||||||||
|
DispidRowset (optional) |
|||||||||||||||||||||||||||||||
|
SetRowset (optional) |
Padding2 (variable) |
||||||||||||||||||||||||||||||
|
... |
|||||||||||||||||||||||||||||||
ClassTableFlags (2 bytes): A CLSTABLE_FLAGS that specifies Boolean properties of the type information.
-
The file format default is 0x0000.
VarFlags (2 bytes): A VARFLAGS, as specified in [MS-OAUT] section 2.2.18, that specifies Boolean properties of the type information.
-
The file format default is 0x0000.
CountOfMethods (4 bytes): An unsigned integer that specifies the number of methods on the default dual interface of the type information.
-
The file format default is 0x00000000.
DispidBind (4 bytes): An unsigned integer that specifies the IDispatch identifier (DispID) of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, in this type information. The value of this field is the memid field of the VARDESC of the function, as specified in [MS-OAUT] section 2.2.43. The VARDESC.wVarFlags field MUST be set to 0x00000014, or FUNCFLAG_FBINDABLE and FUNCFLAG_FDISPLAYBIND, as specified in [MS-OAUT] section 2.2.11.
-
The file format default is 0xFFFFFFFF, DISPID_UNKNOWN.
GetBindIndex (2 bytes): An unsigned integer that specifies the index of the "get" function of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, into the dynamic virtual table of a type information that implements a dual interface. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid field of this FUNCDESC MUST NOT be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of this FUNCDESC MUST be set to INVOKE_PROPERTYGET, as specified in [MS-OAUT] section 2.2.14.
-
The file format default is 0x0000.
PutBindIndex (2 bytes): An unsigned integer that specifies the index of the "put" function of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, into the dynamic virtual table of a type information that implements a dual interface. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid field of this FUNCDESC MUST NOT be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of this FUNCDESC MUST be set to INVOKE_PROPERTYPUT, as specified in [MS-OAUT] section 2.2.14.
-
The file format default is 0x0000.
BindType (2 bytes): A variant type that specifies the type of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2. The value of this field is the vt field of the TYPEDESC, as specified in [MS-OAUT] section 2.2.37, of the FUNCDESC.elemdescFunc, as specified in [MS-OAUT] section 2.2.42, of the function referenced by GetBindIndex or PutBindIndex in this ClassInfoDataBlock.
-
The file format default is 0x0000, VT_EMPTY.
GetValueIndex (2 bytes): An unsigned integer that specifies the index of the function that retrieves the value of the control into the dynamic virtual table of the class. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid of the FUNCDESC MUST be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of the FUNCDESC MUST be set to INVOKE_PROPERTYGET, as specified in [MS-OAUT] section 2.2.14.
-
The file format default is 0x0000.
PutValueIndex (2 bytes): An unsigned integer that specifies the index of the function that sets the value of the control into the dynamic virtual table of the class. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid of the FUNCDESC MUST be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of the FUNCDESC MUST be set to INVOKE_PROPERTYPUT, as specified in [MS-OAUT] section 2.2.14.
-
The file format default is 0x0000.
ValueType (2 bytes): A variant type that specifies the type of the value that is returned in response to DISPID_VALUE. The value of this field is the vt field of the TYPEDESC, as specified in [MS-OAUT] section 2.2.37, of the FUNCDESC.elemdescFunc, as specified in [MS-OAUT] section 2.2.42, of the function referenced by GetValueIndex or PutValueIndex in this ClassInfoDataBlock.
-
The file format default is 0x0000, VT_EMPTY.
Padding1 (variable): Undefined and MUST be ignored. The size of this field is the least number of bytes needed to align the following property, as specified by PaddingAndAlignment.
DispidRowset (4 bytes): An unsigned integer that specifies the DispID of a property that supports a method for fetching rows sequentially, getting the data from those rows, and managing rows. The value of this field is the memid field of the FUNCDESC that specifies the property "set" method, as specified in [MS-OAUT] section 2.2.42, or of the VARDESC that specifies the property, as specified in [MS-OAUT] section 2.2.43. The value of memid can be determined by the algorithm specified in section 2.6.1.1.
The file format default is 0xFFFFFFFF, DISPID_UNKNOWN.
SetRowset (2 bytes): An unsigned integer that specifies the index of the "set" function into the dynamic virtual table of the class, for a property that supports a method for fetching rows sequentially, getting the data from those rows, and managing rows. The value of this field is the oVft field of the FUNCDESC that specifies the property "set" method, as specified in [MS-OAUT] section 2.2.42. The value of oVft can be determined by the algorithm specified in section 2.6.1.2.
-
The file format default is 0x0000.
Padding2 (variable): MUST be set to zero. The size of this field is the least number of bytes required to make the total size, in bytes, of this ClassInfoDataBlock divisible by 4.