2.2.1 HRESULT Return Codes
The following HRESULT return codes are defined by the Disk Management Remote Protocol, and together with the HRESULTs, as specified in [MS-ERREF] section 2.1, they MAY be returned by the server to indicate additional information about the result of a method call or the reason a call failed. If the result is an error rather than simple status information, the most significant bit of the HRESULT is set (as specified in [MS-ERREF]).
Return value/code |
Description |
---|---|
0xC1000001 LDM_E_UNEXPECTED |
An unexpected error has occurred. Check the system event log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer. |
0xC1000004 LDM_E_LOST |
INTERNAL Error — The commit status has been lost. |
0xC100000A LDM_E_BADMSG |
INTERNAL Error — The request contains a message format that is not valid. |
0xC100000C LDM_E_NOMEM |
There is not enough memory available to finish the operation. Save the work, exit other programs, and then try again. |
0xC1000014 LDM_E_NOTRANS |
INTERNAL Error — The operation requires a transaction. |
0xC1000016 LDM_E_RESTART |
INTERNAL Error — The commit has been aborted, transaction must be restarted. |
0xC1000017 LDM_E_DB_RESTART |
The dynamic disks present in the system cannot be configured due to excessive disk input/output (I/O) errors. Verify the status of storage devices, and then restart the computer. |
0xC1000018 LDM_E_VOLDERR |
INTERNAL Error — An unexpected error occurred in the configuration program. |
0xC1000019 LDM_E_REPLAY |
INTERNAL Error — An unexpected error occurred in the kernel during a configuration update. |
0xC100001B LDM_E_LOGIO_FAIL |
INTERNAL Error — Logical Disk Manager (LDM) cannot start the logging thread. |
0xC100001C LDM_E_DG_DISABLED |
The disk group has been disabled. |
0xC1000029 LDM_E_DIAG_DBASE |
One or more errors exist in the disk group configuration copies. |
0xC100002D LDM_E_DIAG_DISABLED |
INTERNAL Error — The configuration program is currently disabled. |
0xC1000030 LDM_E_DIAG_CYCLE |
INTERNAL Error — No convergence between the disk group and disk list. |
0xC1000032 LDM_E_VB_NOENT |
The expected LDM registry keys were not found. |
0xC1000033 LDM_E_VB_SYS |
A system error was encountered while reading or setting an LDM registry key. |
0xC1000034 LDM_E_VB_FORMAT |
INTERNAL Error — String format errors were found in LDM registry keys. |
0xC100003C LDM_E_INPROGRESS |
INTERNAL Error — A transaction is already in progress. |
0xC100003D LDM_E_DISABLED |
INTERNAL Error — This feature is disabled or is not implemented. |
0xC100003E LDM_E_NOSUPPORT |
INTERNAL Error — The requested operation is not supported. |
0xC100003F LDM_E_LOCK |
INTERNAL Error — The requested lock could not be obtained. |
0xC1000040 LDM_E_NOLOCK |
INTERNAL Error — The required lock is not held in the transaction. |
0xC1000041 LDM_E_NO_DLOCK |
INTERNAL Error — The required data lock is not held in the transaction. |
0xC1000042 LDM_E_EXIST |
INTERNAL Error — An object with the specified name already exists in the disk group. |
0xC1000043 LDM_E_NOENT |
The specified object no longer exists in the disk group. |
0xC1000044 LDM_E_CONFIG |
INTERNAL Error — The disk group configuration has changed. |
0xC1000046 LDM_E_BUSY |
The specified object is in active use; operation not allowed. |
0xC1000047 LDM_E_INVAL |
The requested operation is not valid. |
0xC1000049 LDM_E_NEG_SIZE |
INTERNAL Error — Negative length, width, or offset received as parameter of the request. |
0xC100004B LDM_E_BADNAME |
INTERNAL Error — The record name is not valid. |
0xC100004C LDM_E_NOT_DIS |
The operation requires a disabled volume. |
0xC100004D LDM_E_ENABLED |
This mirror cannot be removed because the mirrored volume is currently missing or regenerating. Retry this operation when the mirror state is healthy. |
0xC100004E LDM_E_NO_ASSOC |
INTERNAL Error — The operation requires an associated record. |
0xC100004F LDM_E_ASSOC |
The operation is not allowed because the requested object is in active use. |
0xC1000052 LDM_E_HOLE |
INTERNAL Error — The specified striped plex is not compact. |
0xC1000053 LDM_E_DIFF_SIZE |
INTERNAL Error — The subdisks of the striped plex have different sizes. |
0xC1000054 LDM_E_NONE_ASSOC |
INTERNAL Error — The striped plex has no associated subdisks. |
0xC1000055 LDM_E_FULL_ASSOC |
INTERNAL Error — The record cannot have more associations. |
0xC1000056 LDM_E_INVAL_RTYPE |
INTERNAL Error — The record type is not valid. |
0xC1000057 LDM_E_NOT_SUBDISK |
INTERNAL Error — The specified record is not a subdisk. |
0xC1000058 LDM_E_NOT_PLEX |
INTERNAL Error — The specified record is not a plex. |
0xC1000059 LDM_E_NOT_VOL |
INTERNAL Error — The specified record is not a volume. |
0xC100005A LDM_E_NOT_DM |
INTERNAL Error — The specified record is not a disk media. |
0xC100005B LDM_E_NOT_DG |
INTERNAL Error — The specified record is not a disk group. |
0xC100005C LDM_E_NOT_DA |
INTERNAL Error — The specified record is not a disk access. |
0xC100005D LDM_E_IS_DG |
INTERNAL Error — The operation is not allowed on a disk group. |
0xC100005E LDM_E_MAX_VOL |
The volume limit has been reached; no additional dynamic volumes can be created. |
0xC100005F LDM_E_MAX_PLEX |
INTERNAL Error — Too many plexes exist. |
0xC1000060 LDM_E_OVERLAP |
INTERNAL Error — The subdisk overlaps with another subdisk. |
0xC1000061 LDM_E_TOO_SMALL |
INTERNAL Error — A striped plex subdisk has the length shorter than the stripe width. |
0xC1000062 LDM_E_SD_WIDTH |
INTERNAL Error — A striped plex subdisk has the length not multiple of the stripe width. |
0xC1000063 LDM_E_INVAL_FIELD |
INTERNAL Error — The specified field is not valid. |
0xC1000064 LDM_E_ST_WIDTH |
INTERNAL Error — The plex stripe width is not valid. |
0xC1000065 LDM_E_OVERFLOW |
INTERNAL Error — The operation overflows the maximum offsets. |
0xC1000066 LDM_E_LOG_SD_SMALL |
INTERNAL Error — The log subdisk is too small for the volume. |
0xC1000069 LDM_E_HAS_LOG |
INTERNAL Error — The plex already has a log subdisk. |
0xC100006B LDM_E_NO_DG |
The specified disk group no longer exists. |
0xC100006C LDM_E_LDM_E_DG_MISMATCH |
INTERNAL Error — The request crosses a disk group boundary. |
0xC100006D LDM_E_NOT_ROOTDG |
INTERNAL Error — The request is allowed only in the root disk group. |
0xC100006E LDM_E_PUB_BOUNDS |
INTERNAL Error — The subdisk is not within the public region boundaries. |
0xC100006F LDM_E_BAD_DISK |
The specified disk is not ready or usable. |
0xC1000070 LDM_E_VOL_INVALID |
INTERNAL Error — The specified volume is not usable. |
0xC1000071 LDM_E_PATH_STAT |
The specified device path cannot be accessed. |
0xC1000073 LDM_E_NOROOTDG |
INTERNAL Error — The root disk group is not enabled. |
0xC1000074 LDM_E_NODATATYPE |
INTERNAL Error — The disk access type is not recognized. |
0xC1000075 LDM_E_DAOFFLINE |
The specified disk is offline. |
0xC1000076 LDM_E_REC_TOOBIG |
INTERNAL Error — The record store size is too large. |
0xC1000077 LDM_E_SD_BAD |
INTERNAL Error — The specified subdisk is not enabled. |
0xC1000078 LDM_E_PLEX_BAD |
INTERNAL Error — The specified plex contains disabled subdisks. |
0xC1000079 LDM_E_NOT_EMPTY |
The operation is not allowed because the specified disk is not empty. |
0xC100007A LDM_E_DG_EXIST |
INTERNAL Error — A disk group with the specified name already exists. |
0xC100007B LDM_E_DGCREATED |
INTERNAL Error — The operation is not allowed on a created disk group. |
0xC100007C LDM_E_DG_LOG_FULL |
INTERNAL Error — The configuration is too large for the disk group log. |
0xC100007D LDM_E_DG_LOG_SMALL |
INTERNAL Error — The disk log is too small for the disk group configuration. |
0xC100007E LDM_E_DG_IMPORTED |
INTERNAL Error — The disk group has already been imported. |
0xC100007F LDM_E_DB_REC_ERROR |
INTERNAL Error — An error exists in the configuration record. |
0xC1000080 LDM_E_DB_TOO_BIG |
INTERNAL Error — The configuration is too large to make configuration copies. |
0xC1000081 LDM_E_DGNOTCREATED |
INTERNAL Error — The disk group creation is not finish. |
0xC1000082 LDM_E_LOG_BAD |
INTERNAL Error — There are no valid log copies in the disk group. |
0xC1000083 LDM_E_ROOTDG |
INTERNAL Error — The operation is not allowed on the root disk group. |
0xC1000084 LDM_E_LAST_DISK |
INTERNAL Error — LDM cannot remove the last disk in the disk group. |
0xC1000085 LDM_E_LAST_CONFIG |
INTERNAL Error — LDM cannot remove the last disk group configuration copy. |
0xC1000086 LDM_E_LAST_LOG |
INTERNAL Error — LDM cannot remove the last disk group log copy. |
0xC1000087 LDM_E_DB_FULL |
The LDM configuration is full. No more objects can be created. |
0xC1000088 LDM_E_DB_NOENT |
INTERNAL Error — The database file cannot be found. |
0xC1000089 LDM_E_DB_SYS |
INTERNAL Error — System error in configuration copy. |
0xC100008A LDM_E_DB_FORMAT |
INTERNAL Error — A format error was found in the configuration copy. |
0xC100008B LDM_E_DB_VERSION |
The configuration format version is not supported. |
0xC100008C LDM_E_DB_NOSPC |
INTERNAL Error — The LDM configuration is full. |
0xC100008D LDM_E_DB_SHORT |
INTERNAL Error — Unexpected end of the configuration copy. |
0xC100008E LDM_E_DB_READ |
The LDM could not read the disk configuration. |
0xC100008F LDM_E_DB_WRITE |
The LDM could not write the disk configuration. |
0xC1000090 LDM_E_DB_AS_BAD |
INTERNAL Error — Association not resolved |
0xC1000091 LDM_E_DB_ASCNT_BAD |
INTERNAL Error — The association count is incorrect. |
0xC1000094 LDM_E_DB_MAGIC |
INTERNAL Error — Invalid magic number in the configuration copy. |
0xC1000095 LDM_E_DB_BLKNO |
INTERNAL Error — Invalid block number in the configuration copy. |
0xC1000096 LDM_E_DB_NOMATCH |
INTERNAL Error — No valid disk belonging to the disk group was found. |
0xC1000097 LDM_E_DB_DUPLICATE |
INTERNAL Error — Duplicate records exist in the configuration. |
0xC1000098 LDM_E_DB_INCONSISTENT |
INTERNAL Error — The configuration records are inconsistent. |
0xC1000099 LDM_E_DB_NO_DGREC |
INTERNAL Error — No disk group record exists in the configuration. |
0xC100009A LDM_E_DB_BAD_TEMP |
INTERNAL Error — The temporary and permanent configurations do not match. |
0xC100009B LDM_E_DB_CHANGED |
INTERNAL Error — The on-disk configuration changed during recovery. |
0xC100009E LDM_E_KERN_KNOENT |
INTERNAL Error — A record that was expected was not found in the kernel. |
0xC100009F LDM_E_KERN_DBNOENT |
INTERNAL Error — A record that exists in the kernel was not found in the configuration. |
0xC10000A0 LDM_E_KERN_KDIFF |
INTERNAL Error — The configuration record does not match the kernel. |
0xC10000A1 LDM_E_KERN_INCONSISTENT |
INTERNAL Error — The kernel and on-disk configurations do not match. |
0xC10000A2 LDM_E_PUB_SIZE |
INTERNAL Error — The public region of the disk is too small. |
0xC10000A3 LDM_E_PRIV_SIZE |
INTERNAL Error — The private region of the disk is too small. |
0xC10000A4 LDM_E_PRIV_FULL |
INTERNAL Error — The private region of the disk is full. |
0xC10000A5 LDM_E_PRIV_FORMAT |
INTERNAL Error — A format error was found in the private region of the disk. |
0xC10000A6 LDM_E_PRIV_HEADMATCH |
INTERNAL Error — The disk has inconsistent disk headers. |
0xC10000A7 LDM_E_PRIV_NOHEADER |
INTERNAL Error — The disk header cannot be found. |
0xC10000A8 LDM_E_PRIV_INVAL |
INTERNAL Error — The disk private region contents are not valid. |
0xC10000A9 LDM_E_PRIV_VERSION |
INTERNAL Error — The disk private region version is not supported. |
0xC10000AA LDM_E_PRIV_INCONSISTENT |
INTERNAL Error — The disks in the disk group are inconsistent. |
0xC10000AB LDM_E_FIELD_NOREINIT |
INTERNAL Error — The attribute cannot be changed by reinitializing the disk. |
0xC10000AC LDM_E_DISK_INITED |
INTERNAL Error — The disk has already been initialized. |
0xC10000AD LDM_E_DISK_ALIASED |
INTERNAL Error — The disk header indicates aliased partitions. |
0xC10000AE LDM_E_DISK_SHARED |
The disk is marked as shared. It cannot be used in the base Logical Disk Management product. |
0xC10000AF LDM_E_DISK_WRONGHOST |
The disk is marked as in use by another computer. |
0xC10000B1 LDM_E_MISSING_PUB |
INTERNAL Error — The disk has no public partition. |
0xC10000B5 LDM_E_BAD_SCTR_SIZE |
The disk sector size is not supported by the LDM. |
0xC10000B6 LDM_E_NO_CONFIGS |
INTERNAL Error — The disk group contains no valid configuration copies. |
0xC10000B7 LDM_E_DISK_NOT_FOUND |
The specified disk cannot be located. |
0xC10000B8 LDM_E_DISK_OTHER_DG |
INTERNAL Error — The disk belongs to another disk group. |
0xC10000B9 LDM_E_BADCOLUMN |
INTERNAL Error — The stripe column number is too large for the plex. |
0xC10000BA LDM_E_NOTRAIDVOL |
INTERNAL Error — The volume does not have redundant arrays of independent disks (RAID) read policy. |
0xC10000BB LDM_E_RAIDVOL |
INTERNAL Error — The volume has RAID read policy. |
0xC10000BC LDM_E_TOOMANYRAID |
INTERNAL Error — The volume already has one RAID plex. |
0xC10000BE LDM_E_LIC |
The license has expired or is not available for the operation. |
0xC10000C0 LDM_E_NOTSTORAGE |
INTERNAL Error — The volume does not have the storage attribute. |
0xC10000C1 LDM_E_SUBVOLUME |
INTERNAL Error — The subdisk is defined on a volume. |
0xC10000C3 LDM_E_VOLTOOSMALL |
INTERNAL Error — The volume length is too small to hold subdisks. |
0xC10000C4 LDM_E_HASSUBVOLUME |
INTERNAL Error — One or more subdisks are defined on the volume. |
0xC10000C5 LDM_E_BADRAIDCHANGE |
The operation is not allowed because it would make the RAID-5 volume unusable. |
0xC10000C6 LDM_E_BADRAID |
The operation is not allowed because the RAID-5 volume is currently unusable. |
0xC10000C7 LDM_E_PLEX_DIS |
INTERNAL Error — The plex is disabled. |
0xC10000CC LDM_E_MPTH_DISABLE |
INTERNAL Error — The record is subsumed by a multipath disk. |
0xC10000D1 LDM_E_NT_IF_ERROR |
The operation was unsuccessful because a system error occurred. |
0xC10000D2 LDM_E_TASK_ABORTED |
The operation was canceled at the user's request. |
0xC10000D3 LDM_E_TASK_IOERROR |
The operation was canceled due to a disk I/O error. |
0xC10000D4 LDM_E_TASK_DELETED |
INTERNAL Error — The task has been deleted. |
0xC10000D5 LDM_E_V_NOT_ENABLED |
This operation requires a usable volume. |
0xC10000D6 LDM_E_SPC_SETUP_FAIL |
There is not enough free disk space to satisfy the request. |
0xC10000D7 LDM_E_VOL_SETUP_FAIL |
INTERNAL Error — The volume creation setup failed. |
0xC10000D8 LDM_E_MIR_SETUP_FAIL |
INTERNAL Error — The mirrored volume creation setup failed. |
0xC10000DA LDM_E_GRW_SETUP_FAIL |
INTERNAL Error — The volume grow operation setup failed. |
0x410000DB LDM_E_FOREIGN_DA |
The operation is not allowed because the disk contains foreign partitions. |
0x410000DC LDM_E_PRIMARY_EXISTS |
INTERNAL Error — A primary disk group already exists. |
0x410000DD LDM_E_CAPS_VIOLATION |
The requested operation is not allowed in Windows Professional. |
0x410000DE LDM_E_VOL_NO_ZEROING |
INTERNAL Error — The operation is not allowed because the volume is still initializing. |
0x410000DF LDM_E_DISK_IN_USE |
The requested disk is already in use by this volume. |
0x410000E0 LDM_E_SDNODETACH |
INTERNAL Error — A subdisk of the column is not detached. |
0x410000E1 LDM_E_NOBADDISK |
The operation is not needed because no mirrors or RAID-5 members are currently disabled. |
0x410000E2 LDM_E_DEGRADED |
The operation is not needed because no RAID-5 members are currently disabled. |
0x410000E3 LDM_E_NO_OPEN |
LDM could not open a volume. |
0x410000E5 LDM_E_NO_DISMOUNT |
LDM could not dismount a volume. |
0x410000E6 LDM_E_BAD_PARTITION |
LDM could not determine a partition type. |
0x410000E7 LDM_E_MNT_FAIL |
LDM could not associate a drive letter. |
0x410000E8 LDM_E_FT_QUERY_FAIL |
LDM could not retrieve information about a legacy basic volume. |
0x410000E9 LDM_E_NO_FT |
There is no legacy basic volume on the disk. |
0x410000EA LDM_E_INSUFFICIENT_SPACE |
There is not enough space for the configuration database on the disk. |
0x410000EB LDM_E_FT_UNHEALTHY |
A legacy basic volume is unhealthy. |
0x410000ED LDM_E_NEEDS_REBOOT |
The conversion will require restarting the computer. |
0x410000EE LDM_E_BAD_ACTIVEPARTITION |
An active partition is not the current active partition. |
0x410000F0 LDM_E_TOO_MANY_PARTITIONS |
The disk cannot be partitioned after it has been converted. |
0x410000F1 LDM_E_ENCAP_PENDING |
A disk conversion is already pending. |
0x410000F2 LDM_E_ENCAP_FAIL |
The LDM could not convert the selected disks. |
0x410000F3 LDM_E_WRONG_DISKSET_ID |
The disk configuration was changed on another system. |
0x410000F4 LDM_REENCAP_ABORT |
The LDM detected a previous conversion attempt failure. |
0x410000F5 LDM_ENCAP_DONE |
The selected disk has already been converted. |
0x410000F6 LDM_FT_INCONSISTENT |
The recorded configuration of legacy basic volumes before the conversion does not match the current configuration. |
0x410000F7 LDM_MIXED_PARTITIONS |
A foreign partition has been detected between basic partitions. |
0xC10000F8 LDM_E_CARVE_PARTITION |
The LDM could not create a partition for the specified volume. |
0xC10000F9 LDM_E_FT_PRESENT |
The LDM does not support conversion to dynamic for disks that contain legacy basic volumes. |
0xC10003E8 LDM_E_NODGINFO |
The LDM could not find the primary disk group. |
0xC10003EA LDM_E_INVALIDOBJID |
The type of a cached object is not valid. |
0xC10003EB LDM_E_NORECORD |
A cached object could not be found. |
0xC10003ED LDM_E_NOTVMDISK |
The disk does not belong to a disk group. |
0xC10003F2 LDM_E_VOLUME_IN_USE |
The request cannot be finished because the volume is open or in use. |
0xC10003F3 LDM_E_FORMATINPROGRESS |
The volume specified cannot be formatted because the system is busy formatting another volume. Wait until that format operation is finished before continuing. |
0xC10003F5 LDM_E_OBJECT_STALED |
The disk and volume information in the Disk Management snap-in is out of date. To refresh thedisk and volume information, press F5, or click Refresh on the Action menu. |
0xC10003F6 LDM_E_BAD_FS |
The operation did not finish because the file system is not compatible. |
0xC10003F7 LDM_E_BAD_MEDIA |
The operation did not finish because the media is not compatible. |
0xC10003F8 LDM_E_NOACCESS |
The operation did not finish because access is denied. Check the access permissions. |
0xC10003F9 LDM_E_WRITE_PROTECTED |
The operation did not finish because the media is write-protected. |
0xC10003FA LDM_E_BAD_LABEL |
The operation did not finish because the label supplied is not valid. |
0xC10003FB LDM_E_CANNOT_QUICK_FORMAT |
The operation did not finish because a quick format is not possible. |
0xC10003FC LDM_E_IO_ERROR |
The operation did not finish because an I/O error occurred. Check the System Event Log for more information. |
0xC10003FD LDM_E_NO_DRIVE_LETTER |
The operation requires that a drive letter be assigned to the volume. |
0xC10003FE LDM_E_FILE_NOT_FOUND |
The operation did not finish because the required file is not present. |
0xC10003FF LDM_E_CANNOT_LOAD |
The restore operation did not finish because either the floppy disk does not contain the configuration information or the information is corrupted. |
0xC1000400 LDM_E_MOUNTPOINT_BUSY |
The drive letter could not be assigned because it is already in use. |
0xC1000401 LDM_E_FORMAT_FAILED |
The format did not finish successfully. |
0xC1000402 LDM_E_SERVER_NOTREADY |
The LDM Administrative Service is not yet ready to accept connections. |
0xC1000403 LDM_E_CANT_PROTECT_SYSTEM |
The LDM cannot secure the system partition. |
0xC1000404 LDM_E_CANT_UNPROTECT_SYSTEM |
The LDM cannot unsecure the system partition. |
0xC1000405 LDM_E_FAILED_SHUTDOWN |
The LDM cannot shut down the system. |
0xC1000406 LDM_E_VOL_TOO_BIG |
The volume size is too big for the selected file system. |
0xC1000407 LDM_E_VOL_TOO_SMALL |
The volume size is too small for the selected file system. |
0xC1000408 LDM_CLUSTER_SIZE_TOO_BIG |
The cluster size is too big for the selected file system. |
0xC1000409 LDM_CLUSTER_SIZE_TOO_SMALL |
The cluster size is too small for the selected file system. |
0x8100040A LDM_W_CANTOPENLOG |
Debug log file "%1" could not be opened. Debug tracing is not available. |
0x8100040B LDM_W_TIMEOUT |
The request timed out and could not be finished. |
0x8100040C LDM_W_UNSUPPORTED |
The requested operation is not supported. |
0x0100040D LDM_S_REBOOT_PENDING |
The drive letter reassignment will not occur until the computer is restarted. |
0x8100040E LDM_W_VOL_COMPRESS_FAILED |
The format succeeded, but file and folder compression are not enabled. |
0xC1000411 LDM_E_VMCONFIG_LOAD_FAILED |
Windows cannot load the following LDM configuration library: "%1.dll". The LDM might not be correctly installed, or the system folder might be corrupted. Contact the system administrator for assistance. |
0xC1000412 LDM_E_VOLUMEDISABLED |
The requested operation is not supported on failed volumes. |
0xC1000413 LDM_E_RDONLY |
The requested operation cannot be finished because the media is write-protected. |
0xC1000414 LDM_E_NO_DYNAMIC |
Dynamic disks are not supported on this system. |
0xC1000415 LDM_E_INVALID_FS |
The path provided is on a file system that does not support drive paths. |
0xC1000416 LDM_E_INVALID_PATH |
The path cannot be used for creating a drive path because the folder does not exist or is already a drive path to some other volume. |
0xC1000417 LDM_E_DIR_NOT_EMPTY |
The path cannot be used for creating a drive path because the folder is not empty. |
0xC1000418 LDM_E_NOT_DRIVE_PATH |
The LDM cannot delete the drive path. |
0xC1000419 LDM_E_INVALID_NAME |
The path is not valid and cannot be used for creating a drive path. |
0xC100041B LDM_E_MEDIA_DOESNT_SUPPORT_MOUNT_POINTS |
Drive paths are not supported for removable media. |
0xC100041C LDM_E_DELETE_NOACCESS |
The drive path cannot be deleted because access is denied. |
0xC100041D LDM_E_VOLUME_DISABLED |
The operation did not finish because the partition or volume is not enabled. To enable the partition or volume, restart the computer. |
0xC100041E LDM_CLUSTER_COUNT_TOO_HIGH |
The format operation did not finish because the cluster count is higher than expected. |
0x8100041F LDM_W_MARK_ACTIVE_FAILED_PRIMARY |
The volume was repaired but the underlying partition was not marked active because another partition on the disk is already marked active. Mark the volume active to mark its underlying partitions active. |
0x81000420 LDM_W_MARK_ACITVE_FAILED_LOGICAL |
The volume was repaired but the underlying partition was not marked active because it is a logical drive. |
0xC1000421 LDM_E_SERVICE_DISABLED |
The LDM Administrative Service is disabled. |
0xC1000422 LDM_E_BOOTFILE |
The LDM could not update the boot file for any boot partitions on the destination disk. Verify the ARC path listings in file boot.ini or through the bootcfg.exe tool. |
0xC1000423 LDM_E_BAD_HARDWARE |
The disk configuration operation did not finish. Check the System Event Log for more information on the error. Verify the status of the storage devices before retrying. If that does not solve the problem, close the Disk Management console, then restart Disk Management or restart the computer. |
0xC1000424 LDM_E_BIOS_OFF_OR_HOTPLUG |
Arcpath information for the destination disk does not exist. Either the disk was added after startup, or the SCSI BIOS is disabled on the destination disk's controller. Unable to update the boot file. Verify the arcpath listings in file boot.ini or through the bootcfg.exe tool. |
0xC1000425 LDM_E_VOLUME_GROW_FAILED_FS |
Failed to extend the file system for the volume. |
0xC1000426 LDM_E_GPT_BOOT_MIRRORED_TO_MBR |
The current boot volume has been mirrored to a master boot record (MBR) disk. It will not be possible to boot from the plex on the MBR disk. |
0xC1000427 LDM_E_REGION_LATENCY_RETRY |
The cache has not completely updated after adding or removing partitions. Retry the operation. |
0xC10007CA LDM_E_GENERIC_ERROR |
The operation did not finish. Check the System Event Log for more information on the error. |
0xC10007CB LDM_E_GENERIC_RETRY |
The operation did not finish. Check the System Event Log for more information on the error. Retrying the operation may fix the problem. |
0xC10007CC LDM_E_GENERIC_RESTART |
The operation did not finish. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management before retrying the operation. |
0xC10007CD LDM_E_GENERIC_REBOOT |
The operation did not finish. Check the System Event Log for more information on the error. Restart the computer before retrying the operation. |
0xC10007CE LDM_E_NO_VM |
No dynamic disks are present. |
0xC10007CF LDM_E_INTERNALFAILURE |
An internal error has occurred. Close the Disk Management console, then restart Disk Management, or restart the computer. |
0xC10007D0 LDM_E_PAGEFILE_VOLUME |
This volume contains a pagefile. |
0xC10007D1 LDM_E_SYSTEM_VOLUME |
This volume is marked as an active (system) volume. |
0xC10007D2 LDM_E_CRASHDUMP_VOLUME |
This volume is configured to hold a "crashdump" file. |
0xC10007D3 LDM_E_CRASHDUMP_PAGEFILE_BOOT_SYSTEM_VOLUME |
The request cannot be finished because the volume is open or in use. It can be configured as a system, boot, or pagefile volume, or configured to hold a "crashdump" file. |