Edit

Share via

Concurrent function

  • Article

Applies to: Canvas apps Model-driven apps

Evaluates multiple formulas concurrently with one another.

Description

The Concurrent function allows multiple formulas specified within the same property to be evaluated at the same time if they have connector or Dataverse calls. Normally, multiple formulas are evaluated by chaining them together with the ; (semi-colon) operator, which evaluates each formula sequentially. With the Concurrent function, the app will evaluate all formulas within a property concurrently even after using the ; operator. This concurrency will help users wait less for the same result.

In the OnStart property of your app, use Concurrent to improve performance when the app loads data. When data calls don't start until the previous calls finish, the app must wait for the sum of all request times. If data calls start at the same time, the app needs to wait only for the longest request time. Web browsers often improve performance by performing network calls concurrently.

You can't predict the order in which formulas within the Concurrent function start and end evaluation. Formulas within the Concurrent function shouldn't contain dependencies on other formulas within the same Concurrent function, and Power Apps shows an error if you try. From within, you can safely take dependencies on formulas outside the Concurrent function because they will complete before the Concurrent function starts. Formulas after the Concurrent function can safely take dependencies on formulas within: they'll all complete before the Concurrent function finishes and moves on to the next formula in a chain (if you use the ; operator). Watch out for subtle order dependencies if you're calling functions or service methods that have side effects.

You can chain formulas together with the ; operator within an argument to Concurrent. For example, Concurrent( Set( a, 1 ); Set( b, a+1 ), Set( x, 2 ); Set( y, x+2 ) ) evaluates Set( a, 1 ); Set( b, a+1 ) concurrently with Set( x, 2 ); Set( y, x+2 ). In this case, the dependencies within the formulas are fine: a will be set before b, and x will be set before y.

Depending on the device or browser in which the app is running, only a handful of formulas might actually be evaluated concurrently. Concurrent uses the available capabilities and won't finish until all formulas have been evaluated.

If you enable Formula-level error management (in advanced settings), the first error encountered in argument order is returned from Concurrent; otherwise, blank is returned. If all formulas are successful, true is returned. If one formula fails, the rest of that formula stops, but other formulas continue evaluating.

You can use Concurrent only in behavior formulas.

Syntax

Concurrent( Formula1, Formula2 [, ...] )

  • Formula(s) – Required. Formulas to evaluate concurrently. You must supply at least two formulas.

Examples

Loading data faster

  1. Create an app, and add four data sources from Microsoft Dataverse, SQL Server, or SharePoint.

    This example uses four tables from the sample Adventure Works database on SQL Azure. After you create the database, connect to it from Power Apps using the fully qualified server name (for example, srvname.database.windows.net):

    Connect to Adventure Works database in Azure.

  2. Add a Button control, and set its OnSelect property to this formula:

    ClearCollect( Product, '[SalesLT].[Product]' );
ClearCollect( Customer, '[SalesLT].[Customer]' );
ClearCollect( SalesOrderDetail, '[SalesLT].[SalesOrderDetail]' );
ClearCollect( SalesOrderHeader, '[SalesLT].[SalesOrderHeader]' )

  3. In Microsoft Edge or Google Chrome, turn on developer tools to monitor network traffic while your app is running.

  4. (optional) Turn on network throttling to exaggerate the effects of this comparison.

  5. While holding down the Alt key, select the button, and then watch the network traffic.

    The tools show four requests performed in series, similar to this example. Actual times have been removed as they will vary wildly. The graph shows that each call starts after the last has finished:

    Time graph of four network requests, each one starting after the last finishes, covering the entire span of time.

  6. Save, close, and reopen the app.

    Power Apps caches data, so selecting the button again won't necessarily cause four new requests. Each time you want to test performance, close and reopen your app. If you turned network throttling on, you may want to turn it off until you're ready for another test.

  7. Add a second Button control, and set its OnSelect property to this formula:

    Concurrent(
    ClearCollect( Product, '[SalesLT].[Product]' ),
    ClearCollect( Customer, '[SalesLT].[Customer]' ),
    ClearCollect( SalesOrderDetail, '[SalesLT].[SalesOrderDetail]' ),
    ClearCollect( SalesOrderHeader, '[SalesLT].[SalesOrderHeader]' )
)

    Note that you added the same ClearCollect calls to the first button, but they're wrapped in a Concurrent function and separated by commas this time.

  8. Clear the network monitor in the browser.

  9. If you were using network throttling before, turn it on again.

  10. While holding down the Alt key, select the second button, and then watch the network traffic.

    The tools show four requests performed concurrently, similar to this example. Again, actual times have been removed as they will vary wildly. The graph shows that all the calls start at about the same time and do not wait for the previous one to finish:

    Time graph of four network requests, all four starting together, covering about half of the span of time.

    These graphs are based on the same scale. By using Concurrent, you halved the total amount of time these operations took to finish.

  11. Save, close, and reopen the app.

Race condition

  1. Add a connection to the Microsoft Translator service to your app.

  2. Add a Text input control, and rename it TextInput1 if it has a different name.

  3. Add a Button control, and set its OnSelect property to this formula:

    Set( StartTime, Value( Now() ) );
Concurrent(
    Set( FRTrans, MicrosoftTranslator.Translate( TextInput1.Text, "fr" ) );
        Set( FRTransTime, Value( Now() ) ),
    Set( DETrans, MicrosoftTranslator.Translate( TextInput1.Text, "de" ) );
        Set( DETransTime, Value( Now() ) )
);
Collect( Results,
    {
        Input: TextInput1.Text,
        French: FRTrans, FrenchTime: FRTransTime - StartTime,
        German: DETrans, GermanTime: DETransTime - StartTime,
        FrenchFaster: FRTransTime < DETransTime
    }
)

  4. Add a Data table control, and set its Items property to Results.

  5. On the Properties tab of the right pane, select Edit fields to open the Fields pane.

  6. In the list of fields, select the check box for each field to show them all in the data table.

  7. (optional) Drag the Input field to the top of the list, and drag the FrenchFaster field to the bottom of the list.

    List of fields in the Result collection.

  8. In the Text input control, type or paste a phrase to translate.

  9. While holding down the Alt key, select the button multiple times to fill the table.

    The times are shown in milliseconds.

    Display of the data table containing results of translating the string "Hello World" to French and German. Sometimes the French translation is faster than the German, and sometimes it's the other way around.

    In some cases, the French translation is faster than the German translation, and vice versa. Both start at the same time, but one returns before the other for a variety of reasons, including network latency and server-side processing.

    A race condition would occur if the app depended on one translation ending first. Fortunately, Power Apps flags most timing dependencies that it can detect.