Copy-MgBetaTeam

Module:

Microsoft.Graph.Beta.Teams

Create a copy of a team. This operation also creates a copy of the corresponding group.You can specify which parts of the team to clone: When tabs are cloned, they aren't configured. The tabs are displayed on the tab bar in Microsoft Teams, and the first time a user opens them, they must go through the configuration screen. If the user who opens the tab doesn't have permission to configure apps, they see a message that says that the tab isn't configured. Cloning is a long-running operation. After the POST clone returns, you need to GET the operation returned by the Location: header to see if it's running, succeeded, or failed. You should continue to GET until the status isn't running. The recommended delay between GETs is 5 seconds.

Note

To view the v1.0 release of this cmdlet, view Copy-MgTeam

Syntax

Copy-MgBetaTeam
    -TeamId <String>
    [-ResponseHeadersVariable <String>]
    [-AdditionalProperties <Hashtable>]
    [-Classification <String>]
    [-Description <String>]
    [-DisplayName <String>]
    [-MailNickname <String>]
    [-PartsToClone <String>]
    [-Visibility <String>]
    [-Headers <IDictionary>]
    [-PassThru]
    [-ProgressAction <ActionPreference>]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Copy-MgBetaTeam
    -TeamId <String>
    -BodyParameter <IPaths1Izic0UTeamsTeamIdMicrosoftGraphClonePostRequestbodyContentApplicationJsonSchema>
    [-ResponseHeadersVariable <String>]
    [-Headers <IDictionary>]
    [-PassThru]
    [-ProgressAction <ActionPreference>]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Copy-MgBetaTeam
    -InputObject <ITeamsIdentity>
    [-ResponseHeadersVariable <String>]
    [-AdditionalProperties <Hashtable>]
    [-Classification <String>]
    [-Description <String>]
    [-DisplayName <String>]
    [-MailNickname <String>]
    [-PartsToClone <String>]
    [-Visibility <String>]
    [-Headers <IDictionary>]
    [-PassThru]
    [-ProgressAction <ActionPreference>]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Copy-MgBetaTeam
    -InputObject <ITeamsIdentity>
    -BodyParameter <IPaths1Izic0UTeamsTeamIdMicrosoftGraphClonePostRequestbodyContentApplicationJsonSchema>
    [-ResponseHeadersVariable <String>]
    [-Headers <IDictionary>]
    [-PassThru]
    [-ProgressAction <ActionPreference>]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Description

Create a copy of a team. This operation also creates a copy of the corresponding group.You can specify which parts of the team to clone: When tabs are cloned, they aren't configured. The tabs are displayed on the tab bar in Microsoft Teams, and the first time a user opens them, they must go through the configuration screen. If the user who opens the tab doesn't have permission to configure apps, they see a message that says that the tab isn't configured. Cloning is a long-running operation. After the POST clone returns, you need to GET the operation returned by the Location: header to see if it's running, succeeded, or failed. You should continue to GET until the status isn't running. The recommended delay between GETs is 5 seconds.

Permissions

Permission type	Least privileged permissions	Higher privileged permissions
Delegated (work or school account)	Team.Create	Directory.ReadWrite.All, Group.ReadWrite.All
Delegated (personal Microsoft account)	Not supported.	Not supported.
Application	Team.Create	Directory.ReadWrite.All, Group.ReadWrite.All

Examples

Example 1: Code snippet

Import-Module Microsoft.Graph.Beta.Teams

$params = @{
	displayName = "Library Assist"
	description = "Self help community for library"
	mailNickname = "libassist"
	partsToClone = "apps,tabs,settings,channels,members"
	visibility = "public"
}

Copy-MgBetaTeam -TeamId $teamId -BodyParameter $params

This example shows how to use the Copy-MgBetaTeam Cmdlet.

Parameters

-AdditionalProperties

Additional Parameters

Type:	Hashtable
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-BodyParameter

. To construct, see NOTES section for BODYPARAMETER properties and create a hash table.

Type:	IPaths1Izic0UTeamsTeamIdMicrosoftGraphClonePostRequestbodyContentApplicationJsonSchema
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-Classification

.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DisplayName

.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Headers

Optional headers that will be added to the request.

Type:	IDictionary
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-InputObject

Identity Parameter To construct, see NOTES section for INPUTOBJECT properties and create a hash table.

Type:	ITeamsIdentity
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-MailNickname

.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PartsToClone

clonableTeamParts

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PassThru

Returns true when the command succeeds

Type:	SwitchParameter
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ProgressAction

{{ Fill ProgressAction Description }}

Type:	ActionPreference
Aliases:	proga
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ResponseHeadersVariable

Optional Response Headers Variable.

Type:	String
Aliases:	RHV
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TeamId

The unique identifier of team

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Visibility

teamVisibilityType

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

Microsoft.Graph.Beta.PowerShell.Models.IPaths1Izic0UTeamsTeamIdMicrosoftGraphClonePostRequestbodyContentApplicationJsonSchema

Microsoft.Graph.Beta.PowerShell.Models.ITeamsIdentity

System.Collections.IDictionary

Outputs

System.Boolean

Notes

COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODYPARAMETER <IPaths1Izic0UTeamsTeamIdMicrosoftGraphClonePostRequestbodyContentApplicationJsonSchema>: .

• [(Any) <Object>]: This indicates any property can be added to this object.
• [Classification <String>]:
• [Description <String>]:
• [DisplayName <String>]:
• [MailNickname <String>]:
• [PartsToClone <String>]: clonableTeamParts
• [Visibility <String>]: teamVisibilityType

INPUTOBJECT <ITeamsIdentity>: Identity Parameter

• [AssociatedTeamInfoId <String>]: The unique identifier of associatedTeamInfo
• [ChannelId <String>]: The unique identifier of channel
• [ChatId <String>]: The unique identifier of chat
• [ChatMessageHostedContentId <String>]: The unique identifier of chatMessageHostedContent
• [ChatMessageId <String>]: The unique identifier of chatMessage
• [ChatMessageId1 <String>]: The unique identifier of chatMessage
• [ConversationMemberId <String>]: The unique identifier of conversationMember
• [DayNoteId <String>]: The unique identifier of dayNote
• [DeletedChatId <String>]: The unique identifier of deletedChat
• [DeletedTeamId <String>]: The unique identifier of deletedTeam
• [GroupId <String>]: The unique identifier of group
• [OfferShiftRequestId <String>]: The unique identifier of offerShiftRequest
• [OpenShiftChangeRequestId <String>]: The unique identifier of openShiftChangeRequest
• [OpenShiftId <String>]: The unique identifier of openShift
• [PinnedChatMessageInfoId <String>]: The unique identifier of pinnedChatMessageInfo
• [ResourceSpecificPermissionGrantId <String>]: The unique identifier of resourceSpecificPermissionGrant
• [SchedulingGroupId <String>]: The unique identifier of schedulingGroup
• [SharedWithChannelTeamInfoId <String>]: The unique identifier of sharedWithChannelTeamInfo
• [ShiftId <String>]: The unique identifier of shift
• [ShiftsRoleDefinitionId <String>]: The unique identifier of shiftsRoleDefinition
• [SwapShiftsChangeRequestId <String>]: The unique identifier of swapShiftsChangeRequest
• [TeamId <String>]: The unique identifier of team
• [TeamTemplateDefinitionId <String>]: The unique identifier of teamTemplateDefinition
• [TeamTemplateId <String>]: The unique identifier of teamTemplate
• [TeamsAppDashboardCardDefinitionId <String>]: The unique identifier of teamsAppDashboardCardDefinition
• [TeamsAppDefinitionId <String>]: The unique identifier of teamsAppDefinition
• [TeamsAppId <String>]: The unique identifier of teamsApp
• [TeamsAppInstallationId <String>]: The unique identifier of teamsAppInstallation
• [TeamsAsyncOperationId <String>]: The unique identifier of teamsAsyncOperation
• [TeamsTabId <String>]: The unique identifier of teamsTab
• [TeamworkDeviceId <String>]: The unique identifier of teamworkDevice
• [TeamworkDeviceOperationId <String>]: The unique identifier of teamworkDeviceOperation
• [TeamworkTagId <String>]: The unique identifier of teamworkTag
• [TeamworkTagMemberId <String>]: The unique identifier of teamworkTagMember
• [TimeCardId <String>]: The unique identifier of timeCard
• [TimeOffId <String>]: The unique identifier of timeOff
• [TimeOffReasonId <String>]: The unique identifier of timeOffReason
• [TimeOffRequestId <String>]: The unique identifier of timeOffRequest
• [UserId <String>]: The unique identifier of user
• [UserScopeTeamsAppInstallationId <String>]: The unique identifier of userScopeTeamsAppInstallation
• [WorkforceIntegrationId <String>]: The unique identifier of workforceIntegration

Related Links

• https://learn.microsoft.com/powershell/module/microsoft.graph.beta.teams/copy-mgbetateam
• https://learn.microsoft.com/graph/api/team-clone?view=graph-rest-beta