Set-CMDistributionPoint
Configure a distribution point.
Syntax
Set-CMDistributionPoint
[-EnableMaintenanceMode <Boolean>]
[-AddBoundaryGroupName <String[]>]
[-AddMacAddressForRespondingPxeRequest <String[]>]
[-AllowFallbackForContent <Boolean>]
[-AllowPreStaging <Boolean>]
[-AllowProxyTraffic <Boolean>]
[-AllowPxeResponse <Boolean>]
[-CertificateExpirationTimeUtc <DateTime>]
[-CertificatePassword <SecureString>]
[-CertificatePath <String>]
[-ClearMacAddressForRespondingPxeRequest]
[-ClientCommunicationType <ComputerCommunicationType>]
[-ClientConnectionType <ClientConnectionTypes>]
[-ClientTransferRate <NetworkProfile>]
[-ContentMonitoringPriority <Priority>]
[-ContentValidationSchedule <IResultObject>]
[-Description <String>]
[-EnableAnonymous <Boolean>]
[-EnableBranchCache <Boolean>]
[-EnableContentValidation <Boolean>]
[-EnableLedbat <Boolean>]
[-EnableMulticast <Boolean>]
[-EnableNonWdsPxe <Boolean>]
[-EnablePullDP <Boolean>]
[-EnablePxe <Boolean>]
[-EnableScheduledMulticast <Boolean>]
[-EnableUnknownComputerSupport <Boolean>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
[-Force]
[-InputObject] <IResultObject>
[-KeepWds <Boolean>]
[-MacAddressForRespondingPxeRequest <String[]>]
[-MinimumSessionSize <Int32>]
[-MulticastMaximumClientCount <Int32>]
[-PassThru]
[-PxePassword <SecureString>]
[-PxeServerResponseDelaySec <Int32>]
[-ReassignSiteCode <String>]
[-RemoveBoundaryGroupName <String[]>]
[-RemoveMacAddressForRespondingPxeRequest <String[]>]
[-RespondToAllNetwork]
[-SessionStartDelayMins <Int32>]
[-SourceDistributionPoint <String[]>]
[-SourceDPRank <Int32[]>]
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UseAnyRangeIP]
[-UseComputerAccount]
[-UserDeviceAffinity <UserDeviceAffinityType>]
[-UserName <String>]
[-EnableDoinc <Boolean>]
[-DiskSpaceUnit <DiskSpaceEnum>]
[-DiskSpaceDoinc <Int32>]
[-LocalDriveDoinc <String>]
[-RetainDoincCache <Boolean>]
[-AgreeDoincLicense <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMDistributionPoint
[-EnableMaintenanceMode <Boolean>]
[-AddBoundaryGroupName <String[]>]
[-AddMacAddressForRespondingPxeRequest <String[]>]
[-AllowFallbackForContent <Boolean>]
[-AllowPreStaging <Boolean>]
[-AllowProxyTraffic <Boolean>]
[-AllowPxeResponse <Boolean>]
[-CertificateExpirationTimeUtc <DateTime>]
[-CertificatePassword <SecureString>]
[-CertificatePath <String>]
[-ClearMacAddressForRespondingPxeRequest]
[-ClientCommunicationType <ComputerCommunicationType>]
[-ClientConnectionType <ClientConnectionTypes>]
[-ClientTransferRate <NetworkProfile>]
[-ContentMonitoringPriority <Priority>]
[-ContentValidationSchedule <IResultObject>]
[-Description <String>]
[-EnableAnonymous <Boolean>]
[-EnableBranchCache <Boolean>]
[-EnableContentValidation <Boolean>]
[-EnableLedbat <Boolean>]
[-EnableMulticast <Boolean>]
[-EnableNonWdsPxe <Boolean>]
[-EnablePullDP <Boolean>]
[-EnablePxe <Boolean>]
[-EnableScheduledMulticast <Boolean>]
[-EnableUnknownComputerSupport <Boolean>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
[-Force]
[-KeepWds <Boolean>]
[-MacAddressForRespondingPxeRequest <String[]>]
[-MinimumSessionSize <Int32>]
[-MulticastMaximumClientCount <Int32>]
[-PassThru]
[-PxePassword <SecureString>]
[-PxeServerResponseDelaySec <Int32>]
[-ReassignSiteCode <String>]
[-RemoveBoundaryGroupName <String[]>]
[-RemoveMacAddressForRespondingPxeRequest <String[]>]
[-RespondToAllNetwork]
[-SessionStartDelayMins <Int32>]
[-SiteCode <String>]
[-SiteSystemServerName] <String>
[-SourceDistributionPoint <String[]>]
[-SourceDPRank <Int32[]>]
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UseAnyRangeIP]
[-UseComputerAccount]
[-UserDeviceAffinity <UserDeviceAffinityType>]
[-UserName <String>]
[-EnableDoinc <Boolean>]
[-DiskSpaceUnit <DiskSpaceEnum>]
[-DiskSpaceDoinc <Int32>]
[-LocalDriveDoinc <String>]
[-RetainDoincCache <Boolean>]
[-AgreeDoincLicense <Boolean>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-CMDistributionPoint cmdlet modifies a distribution point on a site system server.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Set properties of a distribution point
The first command gets the distribution point object for the site system server named MySiteSys_11310.Contoso.com. It then stores the object in the $DP variable. The second command modifies the distribution point object stored in that variable.
$DP = Get-CMDistributionPoint -SiteSystemServerName "MySiteSys_11310.Contoso.com"
Set-CMDistributionPoint -InputObject $DP -AllowFallbackForContent $True -AllowPreStaging $True -AllowPxeResponse $False -ClientCommunicationType Http -ClientConnectionType Internet -ContentMonitoringPriority HighExample 2: Reassign a distribution point to a new site
The following example reassigns the mydp server from site ABC to site XYZ.
Set-CMDistributionPoint -SiteSystemServerName "MyDP.TestDOM.net" -SiteCode "ABC" -ReassignSiteCode "XYZ"Example 3: Enable Microsoft Connected Cache
The first command gets the distribution point object, and stores it in a variable. It passes that object through the pipeline to enable Connected Cache and configure other related settings.
$dp = Get-CMDistributionPoint -SiteSystemServerName "dp01.contoso.com"
$dp | Set-CMDistributionPoint -RetainDoincCache $true -EnableDoinc $true -AgreeDoincLicense $true
$dp | Set-CMDistributionPoint -LocalDriveDoinc "Z:" -DiskSpaceDoinc 9000 -DiskSpaceUnit GBParameters
-AddBoundaryGroupName
Adds an array of boundary groups, by name, to a distribution point.
| Type: | String[] |
| Aliases: | AddBoundaryGroupNames |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AddMacAddressForRespondingPxeRequest
Adds an array of MAC addresses that respond to PXE requests for a PXE-enabled distribution point.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AgreeDoincLicense
When you use the EnableDoinc parameter, set this parameter to $true to accept the Microsoft Connected Cache server license terms. For more information, see Microsoft Connected Cache in Configuration Manager.
If you've already agreed to the licensing terms, you don't have to include this parameter. You see this warning when you unnecessarily include it:
The parameter 'AgreeDoincLicense' has been ignored. Reason: Once the license terms agreement is selected, it will be grayed out and never uncheck it.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowFallbackForContent
Indicates whether clients outside of the boundary groups associated with a site system can fall back and use this site system as a source location for content when no other site systems are available.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowPreStaging
Indicates whether the distribution point is enabled for prestaged content.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowProxyTraffic
Enables the site system to use a proxy server when it connects to the internet.
| Type: | Boolean |
| Aliases: | EnableCloudGateway |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowPxeResponse
Indicates whether the distribution point can respond to PXE requests.
| Type: | Boolean |
| Aliases: | AllowRespondIncomingPxeRequest |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificateExpirationTimeUtc
Specify a date and time when the self-signed certificate expires.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificatePassword
Specify a secure string password for a PKI client certificate specified in CertificatePath.
| Type: | SecureString |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CertificatePath
Specify the path for a PKI client certificate to import for HTTPS communication. Use the CertificatePassword parameter for the certificate's password.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearMacAddressForRespondingPxeRequest
Add this parameter to remove the array of MAC addresses that the distribution point uses to respond to PXE requests.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientCommunicationType
Specifies how clients or devices communicate with the distribution point. If you specify Https, use the CertificatePath and CertificatePassword parameters to specify the PKI certificate to use.
| Type: | ComputerCommunicationType |
| Accepted values: | Http, Https |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientConnectionType
Specifies the client connection type.
| Type: | ClientConnectionTypes |
| Accepted values: | Intranet, Internet, InternetAndIntranet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientTransferRate
Specify the client transfer rate.
| Type: | NetworkProfile |
| Accepted values: | None, ProfileCustom, Profile10Mbps, Profile100Mbps, Profile1Gbps |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentMonitoringPriority
Specify the content monitoring priority.
| Type: | Priority |
| Accepted values: | Lowest, Low, Medium, High, Highest |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentValidationSchedule
If you use the EnableContentValidation parameter, use this parameter to specify the schedule when the distribution point validates content. To create a schedule token object, use the New-CMSchedule cmdlet.
| Type: | IResultObject |
| Aliases: | ValidateContentSchedule |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Specify an optional description for the distribution point.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DiskSpaceDoinc
When you use the EnableDoinc parameter, use this parameter to specify the amount of disk space to be used for Microsoft Connected Cache. Use the DiskSpaceUnit parameter to determine if this value is disk space in GB or a percentage value.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DiskSpaceUnit
Use this parameter with DiskSpaceDoinc to determine if that value is disk space in GB or a percentage value.
| Type: | DiskSpaceEnum |
| Accepted values: | GB, Percentage |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableAnonymous
Indicates that the distribution point permits anonymous connections from Configuration Manager clients to the content library.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableBranchCache
Indicates that clients that use Windows BranchCache are allowed to download content from this on-premises distribution point.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableContentValidation
Indicates that content validation is enabled for this distribution point. Use the ContentValidationSchedule parameter to specify the schedule.
| Type: | Boolean |
| Aliases: | EnableValidateContent |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableDoinc
Set this parameter to $true to enable this distribution point to be used as a Microsoft Connected Cache server. For more information, see Microsoft Connected Cache in Configuration Manager.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableLedbat
Enable distribution points to use network congestion control with Windows LEDBAT. This feature can adjust the download speed to use the unused network bandwidth.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableMaintenanceMode
Set this parameter to $true to enable maintenance mode.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableMulticast
Enable multicast for the distribution point.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableNonWdsPxe
Enable the Configuration Manager PXE responder on the distribution point. When you enable a PXE responder without Windows Deployment Service (WDS), Configuration Manager installs its PXE responder service on the distribution point.
For more information, see enable PXE on the distribution point.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnablePullDP
When set to $True, the distribution point can pull content from other distribution points. Use this parameter with the SourceDPRank and SourceDistributionPoint parameters.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnablePxe
Enable PXE on the distribution point. When you enable PXE, Configuration Manager installs Windows Deployment Services (WDS) on the server, if it's not already installed. WDS is the service that supports PXE boot to install Windows images over the network.
| Type: | Boolean |
| Aliases: | EnablePxeSupport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableScheduledMulticast
Indicates whether you can schedule when Configuration Manager deploys the OS image from the distribution point.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableUnknownComputerSupport
Enable support for unknown computers. Unknown computers are devices that Configuration Manager hasn't yet discovered.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndIPAddress
Specifies the ending IP address in a range of multicast addresses that Configuration Manager uses to send data to clients.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndUdpPort
Specifies the ending UDP port in a range of multicast UDP ports that Configuration Manager uses to send data to clients.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
Use this parameter to add a duplicate certificate without asking for confirmation.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InitialMPForLookup
This parameter expects a string that represents the different lookup MPs separated by the symbol *. MPs are filtered out based on the Site code of the DP, if the MP' site code is different, an error is thrown.
- If the DP has Preferred MP already enabled, -InitialMPForLookup accepts the string of MPs.
- If we're setting the PreferredMPEnabled as disabled, -InitialMPForLookup isn't required to be passed in.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specify a distribution point object to configure. To get this object, use the Get-CMDistributionPoint cmdlet.
| Type: | IResultObject |
| Aliases: | DistributionPoint |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-KeepWds
Indicates whether the distribution point keeps Windows Deployment Services (WDS) or removes it if you disable PXE.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LocalDriveDoinc
When you use the EnableDoinc parameter, use this parameter to select the drive to be used for the Microsoft Connected Cache. If you specify Automatic, Configuration Manager selects the drive with the most free space.
| Type: | String |
| Accepted values: | Automatic, A:, B:, C:, D:, E:, F:, G:, H:, I:, J:, K:, L:, M:, N:, O:, P:, Q:, R:, S:, T:, U:, V:, W:, X:, Y:, Z: |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MacAddressForRespondingPxeRequest
Specify an array of MAC addresses that the distribution point uses to respond to PXE requests.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinimumSessionSize
Specifies how many client requests must be received before a scheduled multicast starts to deploy an OS.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MulticastMaximumClientCount
Specifies the maximum number of clients that can download the OS from this distribution point.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you're working. By default, this cmdlet may not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PreferredMPEnabled
This parameter is boolean where the $true value for the parameter indicates that the dynamic MP usage is enabled. PXE has to be enabled on the Distribution Point before using this parameter.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PxePassword
Specify the PXE password as a secure string.
| Type: | SecureString |
| Aliases: | ComputersUsePxePassword |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PxeServerResponseDelaySec
Specifies how long the distribution point delays before it responds to computer requests when you use multiple PXE-enabled distribution points. By default, the Configuration Manager PXE service point responds first to network PXE requests. This integer value is in seconds.
| Type: | Int32 |
| Aliases: | PxeServerResponseDelaySeconds |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReassignSiteCode
Use this parameter to reassign the distribution point to a new site. Specify the three-letter site code as a string value.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveBoundaryGroupName
Removes an array of boundary groups by name from the distribution point.
| Type: | String[] |
| Aliases: | RemoveBoundaryGroupNames |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveMacAddressForRespondingPxeRequest
Removes an array of MAC addresses that the distribution point uses to respond to PXE requests.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RespondToAllNetwork
Indicates that the distribution point responds to PXE requests that arrive on any of its network interfaces.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RetainDoincCache
When you use the EnableDoinc parameter, use this parameter to keep the content on the server when you disable the Microsoft Connected Cache.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SessionStartDelayMins
Specifies the number of minutes that Configuration Manager waits before it responds to the first multicast deployment request.
| Type: | Int32 |
| Aliases: | SessionStartDelayMinutes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteCode
Specify the three-character code for the Configuration Manager site that hosts this site system role.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteSystemServerName
Specify the FQDN of the server that hosts this site system role.
| Type: | String |
| Aliases: | Name, ServerName |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceDistributionPoint
When you use the EnablePullDP parameter, use this parameter to specify an array of distribution point sources. This distribution point pulls content from the specified sources. Use the SourceDPRank parameter to prioritize these sources.
| Type: | String[] |
| Aliases: | SourceDistributionPoints |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceDPRank
Specify an array that contains the priorities for the distribution point sources from which this distribution point can pull content. When source distribution points have the same priority, the pull distribution point randomly selects a source. Use this parameter with the EnablePullDP and SourceDistributionPoint parameters.
| Type: | Int32[] |
| Aliases: | SourceDPRanks |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartIPAddress
Specifies the starting IP address in a range of multicast addresses that Configuration Manager uses to send data to clients.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartUdpPort
Specifies the starting UDP port in a range of multicast UDP ports that Configuration Manager uses to send data to clients.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseAnyRangeIP
Indicates that multicast uses IP addresses within any range.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseComputerAccount
Indicates that the distribution point uses its computer account as the multicast connection account when it connects to the primary site database.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserDeviceAffinity
Specifies how you want the distribution point to associate users with their devices for PXE deployments.
| Type: | UserDeviceAffinityType |
| Accepted values: | DoNotUse, AllowWithManualApproval, AllowWithAutomaticApproval |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserName
Specify the name of the user that the distribution point uses to connect to the primary site database. Use the format domain\username.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
IResultObject