Edit

Share via

Add-DhcpServerv6Class

  • Reference
Module:
DhcpServer

Adds an IPv6 vendor or user class to the Dynamic Host Configuration Protocol (DHCP) server service.

Syntax

Add-DhcpServerv6Class
   [-ComputerName <String>]
   [-Description <String>]
   [-VendorId <UInt32>]
   [-Data] <String>
   [-Type] <String>
   [-Name] <String>
   [-PassThru]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Add-DhcpServerv6Class cmdlet adds an IPv6 vendor or user class to the Dynamic Host Configuration Protocol (DHCP) server service.

The VendorId parameter needs to be specified if a vendor class is being added, but should not be specified for a user class.

Examples

EXAMPLE 1

PS C:\>Add-DhcpServerv6Class -Name "User Class for Lab Computers" -Type User -Data "LabComputers"

This example adds a DHCPv6 user class for lab computers.

EXAMPLE 2

PS C:\>Add-DhcpServerv6Class -Name "Vendor Class for Printers" -Type Vendor -Data "JetPrinters" -VendorId 100

This example adds a DHCPv6 vendor class for printers from a specific vendor identified by the vendor ID.

Parameters

-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv6 or IPv6 address, of the target computer running the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Data

Specifies the data for the vendor or user class. This is the actual value expected to be present in the request from the client belonging to this vendor or user class. The format for this parameter can be given as ANSI or hexadecimal.

Type:String
Position:3
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Description

Specifies the description string to be set on the vendor or user class being added.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of the vendor or user class being added.

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Type

Specifies the type of the class. The acceptable values for this parameter are: Vendor or User.

Type:String
Accepted values:Vendor, User
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VendorId

Specifies the enterprise number of the vendor class. If this parameter is specified for user class, then an error is displayed.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.