Set-DhcpServerv6OptionValue
Sets an IPv6 option value at the server, scope, or reservation level.
Syntax
OptionIds (Default)
Set-DhcpServerv6OptionValue
[[-Prefix] <IPAddress>]
[-Value] <String[]>
[-OptionId] <UInt32>
[-PassThru]
[-Force]
[-UserClass <String>]
[-ComputerName <String>]
[-ReservedIP <IPAddress>]
[-VendorClass <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
CommonOptions
Set-DhcpServerv6OptionValue
[[-Prefix] <IPAddress>]
[-PassThru]
[-Force]
[-UserClass <String>]
[-DnsServer <IPAddress[]>]
[-DomainSearchList <String[]>]
[-InfoRefreshTime <UInt32>]
[-ComputerName <String>]
[-ReservedIP <IPAddress>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-DhcpServerv6OptionValue cmdlet sets an IPv6 option value at the server, scope, or reservation level. The definition for the option must already exist on the Dynamic Host Configuration Protocol (DHCP) server service. If you specify the ReservedIP parameter, the option values are set at the reservation level. If you specify only the Prefix parameter, the option values are set at the scope level. If you specify neither the Prefix nor ReservedIP parameter, the option values are set at the server level. The Prefix and ReservedIP parameters cannot both be specified.
If you specify the VendorClass parameter, this cmdlet sets the option value for the specified vendor class. If you specify the UserClass parameter, this cmdlet sets the option value for the specified user class.
Examples
Example 1: Set server level option values
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -DnsServer 2001:4898:7020:1020::2 -DomainSearchList "contoso.com"
This example sets the DHCPv6 server level option values for DNS server and domain search list options.
Example 2: Set option values for a scope
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -DnsServer 2001:4898:7020:1020::2 -DomainSearchList "contoso.com"
This example sets the DHCPv6 option values for DNS server and domain search list options on the scope 2001:4898:7020:1020::.
Example 3: Set service-wide option value for DNS server
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -OptionId 23 -Value "2001:4898:7020:1020::2"
This example sets server-wide DHCPv6 option value for option ID 23, or the DNS server.
Example 4: Set option value for DNS server for a scope
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -OptionId 23 -Value "2001:4898:7020:1020::2"
This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified DHCPv6 scope.
Example 5: Set option value for DNS server for a reservation
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -ReservedIP 2001:4898:7020:1020::5 -OptionId 23 -Value "2001:4898:7020:1020::2"
This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified reservation.
Example 6: Set a vendor class specific option value
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -VendorClass "MSUCClient" -OptionId 5 -Value "6874747073"
This example sets the vendor class specific DHCPv6 option value configured on the specified scope for the specified vendor class named MSUCClient.
Example 7: Set a user class specific option value for DNS server
PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -UserClass "LabComputer" -OptionId 23 -Value "2001:4898:7020:1020::20"
This example sets the user class specific DHCPv6 option value for option ID 23, or the DNS server, on the specified scope for the specified user class.
Parameters
-AsJob
Runs the cmdlet as a background job.
Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell® background jobs, see about_Jobs.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Cn |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DnsServer
Specifies one or more values for the DNS server option.
Parameter properties
| Type: | IPAddress[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
CommonOptions
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-DomainSearchList
Specifies one or more values for the domain search list option.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
CommonOptions
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Force
Specifies that the DNS server validation is skipped. This parameter is applicable only if the DNSServer parameter or option ID 23 is specified.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InfoRefreshTime
Specifies the value for the information refresh option. This parameter value specifies an upper bound for how long a client waits before refreshing information retrieved from DHCPv6 server. This parameter is used with stateless DHCPv6 as there are no addresses or other entities with lifetimes that can tell the client when to contact the DHCPv6 server to refresh its configuration.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
CommonOptions
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-OptionId
Specifies the numeric identifier (ID) of the option for which a value is set.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OptionIds
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Prefix
Specifies the IPv6 subnet prefix of the scope on which the option value is set.
Parameter properties
| Type: | IPAddress |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 3 |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ReservedIP
Specifies the IPv6 address of the reservation for which the option value is set.
Parameter properties
| Type: | IPAddress |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IPAddress |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UserClass
Specifies the option value for the specified user class.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Value
Specifies the value to set for the option.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OptionIds
| Position: | 2 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-VendorClass
Specifies the option value for the specified vendor class.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OptionIds
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.