New-EtwTraceSession
Creates an ETW trace session.
Syntax
Default (Default)
New-EtwTraceSession
[-Name] <String>
[-LogFileMode <UInt32>]
[-LocalFilePath <String>]
[-MaximumFileSize <UInt32>]
[-BufferSize <UInt32>]
[-MinimumBuffers <UInt32>]
[-MaximumBuffers <UInt32>]
[-FlushTimer <UInt32>]
[-ClockType <ClockType>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Start-EtwTraceSession cmdlet replaces this cmdlet as the recommended method of starting an ETW session. It provides an easier way to specify common LogFileMode settings and other parameters.
The New-EtwTraceSession cmdlet creates an Event Trace for Windows (ETW) trace session.
Examples
Example 1: Create an ETW trace session
PS C:\> New-EtwTraceSession -Name "NetCfgTrace" -MaximumBuffers 24
This command creates an ETW trace session named NetCfgTrace that has a value of 24 for the MaximumBuffers parameter.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BufferSize
Specifies the ETW session buffer size, in kilobytes.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ClockType
Specifies the type of timestamp that will be used for each event logged to this ETW session.
This is an advanced session configuration option, and it is not recommended that this parameter be set.
For more information, see the description of the ClientContext field in the topic WNODE_HEADER structure for a description of the different clock types available.
Parameter properties
| Type: | ClockType |
| Default value: | None |
| Accepted values: | Performance, System, Cycle |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-FlushTimer
When set, all active buffers in the session will be flushed at this interval, in seconds.
This is an advanced session configuration option, and it is not recommended that this parameter be set.
If it is not set, the ETW will select an appropriate default based on the LogFileMode.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LocalFilePath
Specifies the full path to the file the ETW session should write to. For non-buffering mode sessions only.
When creating a new-file file mode session, the file path must contain a %d in the file name.
Do not use this parameter if the session is configured as a buffering mode session. Use Save-EtwTraceSession to save a buffering mode session to disk instead.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LogFileMode
Specifies the ETW session logging mode. The value is a bitmask of the ETW logging mode constants. For valid values, see Logging Mode Constants.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaximumBuffers
Specifies the maximum number of buffers the ETW session should use.
The ETW session will use a maximum of (BufferSize * MaximumBuffers) kilobytes of memory. Depending on the specified LogFileMode this may be pageable or non-paged memory.
If the session is losing events because the buffers cannot be flushed quickly enough to keep up with the incoming event rate, try increasing this value.
Configuring a session to use too many buffers may affect system performance.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaximumFileSize
Specifies the maximum file size for the output .etl file to grow to, in megabytes.
The parameter must be set for a circular, new-file, or sequential file mode ETW session.
For circular sessions, once the file reaches this size the oldest buffers will be overwritten by the new buffers.
For new-file sessions, once the file reaches this size a new file will be created and all new events will be written to that file.
For sequential file sessions, once the file reaches this size the session will stop.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MinimumBuffers
Specifies the minimum number of buffers the ETW session should use.
The ETW session will use a minimum of (BufferSize * MinimumBuffers) kilobytes of memory. Depending on the specified LogFileMode this may be pageable or non-paged memory.
If the session is losing events because the buffers cannot be flushed quick enough to keep up with the incoming event rate, try increasing this value.
Configuring a session to use too many buffers may affect system performance.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Specifies the name of the new ETW trace session.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 0 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.