Connect-ExchangeOnline
This cmdlet is available only in the Exchange Online PowerShell module. For more information, see About the Exchange Online PowerShell module.
Use the Connect-ExchangeOnline cmdlet in the Exchange Online PowerShell module to connect to Exchange Online PowerShell or standalone Exchange Online Protection PowerShell using modern authentication. This cmdlet works for accounts with or without multi-factor authentication (MFA).
To connect to Security & Compliance PowerShell, use the Connect-IPPSSession cmdlet.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Connect-ExchangeOnline
[[-ConnectionUri] <String>]
[[-AzureADAuthorizationEndpointUri] <String>]
[[-ExchangeEnvironmentName] <ExchangeEnvironment>]
[[-PSSessionOption] <PSSessionOption>]
[[-DelegatedOrganization] <String>]
[[-Prefix] <String>]
[[-CommandName] <String[]>]
[[-FormatTypeName] <String[]>]
[-AccessToken <String>]
[-AppId <String>]
[-BypassMailboxAnchoring]
[-Certificate <X509Certificate2>]
[-CertificateFilePath <String>]
[-CertificatePassword <SecureString>]
[-CertificateThumbprint <String>]
[-Credential <PSCredential>]
[-Device]
[-EnableErrorReporting]
[-InlineCredential]
[-LogDirectoryPath <String>]
[-LogLevel <LogLevel>]
[-ManagedIdentity]
[-ManagedIdentityAccountId <String>]
[-Organization <String>]
[-PageSize <UInt32>]
[-ShowBanner]
[-ShowProgress <Boolean>]
[-SigningCertificate <X509Certificate2>]
[-SkipLoadingCmdletHelp]
[-SkipLoadingFormatData]
[-TrackPerformance <Boolean>]
[-UseMultithreading <Boolean>]
[-UserPrincipalName <String>]
[-UseRPSSession]
[<CommonParameters>] Description
This cmdlet creates a PowerShell connection to your Exchange Online organization.
Connect commands will likely fail if the profile path of the account that you used to connect contains special PowerShell characters (for example, $). The workaround is to connect using a different account that doesn't have special characters in the profile path.
Examples
Example 1
Connect-ExchangeOnline -UserPrincipalName chris@contoso.comThis example connects to Exchange Online PowerShell using modern authentication, with or without multi-factor authentication (MFA). The connection uses REST API mode and doesn't require Basic authentication to be enabled in WinRM on the local computer.
Example 2
Connect-ExchangeOnline -AppId <%App_id%> -CertificateThumbprint <%Thumbprint string of certificate%> -Organization "contoso.onmicrosoft.com"This example connects to Exchange Online PowerShell in an unattended scripting scenario using a certificate thumbprint.
Example 3
Connect-ExchangeOnline -AppId <%App_id%> -Certificate <%X509Certificate2 object%> -Organization "contoso.onmicrosoft.com"This example connects to Exchange Online PowerShell in an unattended scripting scenario using a certificate file. This method is best suited for scenarios where the certificate is stored in remote machines and fetched at runtime. For example, the certificate is stored in the Azure Key Vault.
Example 4
Connect-ExchangeOnline -DeviceIn PowerShell 7.0.3 or later using version 2.0.4 or later of the module, this example connects to Exchange Online PowerShell in interactive scripting scenarios on computers that don't have web browsers.
The command returns a URL and unique code that's tied to the session. You need to open the URL in a browser on any computer, and then enter the unique code. After you complete the login in the web browser, the session in the Powershell 7 window is authenticated via the regular Microsoft Entra authentication flow, and the Exchange Online cmdlets are imported after few seconds.
Example 6
Connect-ExchangeOnline -InlineCredentialIn PowerShell 7.0.3 or later using version 2.0.4 or later of the module, this example connects to Exchange Online PowerShell in interactive scripting scenarios by passing credentials directly in the PowerShell window.
Parameters
-AccessToken
Note: This parameter is available in version 3.1.0 or later of the module.
The AccessToken parameter specifies the OAuth JSON Web Token (JWT) that's used to connect to ExchangeOnline.
Depending on the type of access token, you need to use this parameter with the Organization, DelegatedOrganization, or UserPrincipalName parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-AppId
The AppId parameter specifies the application ID of the service principal that's used in certificate based authentication (CBA). A valid value is the GUID of the application ID (service principal). For example, 36ee4c6c-0812-40a2-b820-b22ebd02bce3.
For more information, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-AzureADAuthorizationEndpointUri
Note: If you use the ExchangeEnvironmentName parameter, you don't need to use the AzureADAuthorizationEndpointUri or ConnectionUri parameters.
The AzureADAuthorizationEndpointUri parameter specifies the Microsoft Entra Authorization endpoint that can issue OAuth2 access tokens. The following Exchange Online PowerShell environments and related values are supported:
- Microsoft 365 or Microsoft 365 GCC: Don't use this parameter. The required value is
https://login.microsoftonline.com/common, but that's also the default value, so you don't need to use this parameter. - Office 365 Germany:
https://login.microsoftonline.de/common - Microsoft 365 GCC High or Microsoft 365 DoD:
https://login.microsoftonline.us/common
If you use the UserPrincipalName parameter, you don't need to use the AzureADAuthorizationEndpointUri parameter for MFA or federated users in environments that normally require it (UserPrincipalName or AzureADAuthorizationEndpointUri is required; OK to use both).
Note: MFA authentication or federated authentication isn't available in Office 365 operated by 21Vianet.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-BypassMailboxAnchoring
The BypassMailboxAnchoring switch bypasses the use of the mailbox anchoring hint. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Certificate
The Certificate parameter specifies the certificate that's used for certificate-based authentication (CBA). A valid value is the X509Certificate2 object value of the certificate.
Don't use this parameter with the CertificateFilePath or CertificateThumbprint parameters.
For more information about CBA, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
| Type: | X509Certificate2 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-CertificateFilePath
The CertificateFilePath parameter specifies the certificate that's used for CBA. A valid value is the complete public path to the certificate file. Use the CertificatePassword parameter with this parameter.
Don't use this parameter with the Certificate or CertificateThumbprint parameters.
For more information about CBA, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-CertificatePassword
The CertificatePassword parameter specifies the password that's required to open the certificate file when you use the CertificateFilePath parameter to identify the certificate that's used for CBA.
You can use the following methods as a value for this parameter:
(ConvertTo-SecureString -String '<password>' -AsPlainText -Force).- Before you run this command, store the password as a variable (for example,
$password = Read-Host "Enter password" -AsSecureString), and then use the variable ($password) for the value. (Get-Credential).passwordto be prompted to enter the password securely when you run this command.
For more information about CBA, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
Note: Using a ConvertTo-SecureString command to store the password of the certificate locally defeats the purpose of a secure connection method for automation scenarios. Using a Get-Credential command to prompt you for the password of the certificate securely isn't ideal for automation scenarios. In other words, there's really no automated and secure way to connect using a local certificate.
| Type: | SecureString |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-CertificateThumbprint
The CertificateThumbprint parameter specifies the certificate that's used for CBA. A valid value is the thumbprint value of the certificate. For example, 83213AEAC56D61C97AEE5C1528F4AC5EBA7321C1.
Don't use this parameter with the Certificate or CertificateFilePath parameters.
Note: The CertificateThumbprint parameter is supported only in Microsoft Windows.
For more information about CBA, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-CommandName
The CommandName parameter specifies the comma separated list of commands to import into the session. Use this parameter for applications or scripts that use a specific set of cmdlets. Reducing the number of cmdlets in the session helps improve performance and reduces the memory footprint of the application or script.
| Type: | String[] |
| Position: | 6 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ConnectionUri
Note: If you use the ExchangeEnvironmentName parameter, you don't need to use the AzureADAuthorizationEndpointUri or ConnectionUri parameters.
The ConnectionUri parameter specifies the connection endpoint for the PowerShell session. The following Exchange Online PowerShell environments and related values are supported:
- Microsoft 365 or Microsoft 365 GCC: Don't use this parameter. The required value is
https://outlook.office365.com/powershell-liveid/, but that's also the default value, so you don't need to use this parameter. - Office 365 Germany:
https://outlook.office.de/PowerShell-LiveID - Office 365 operated by 21Vianet:
https://partner.outlook.cn/PowerShell - Microsoft 365 GCC High:
https://outlook.office365.us/powershell-liveID - Microsoft 365 DoD:
https://webmail.apps.mil/powershell-liveID
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Credential
The Credential parameter specifies the username and password that's used to connect to Exchange Online PowerShell. Typically, you use this parameter in scripts or when you need to provide different credentials that have the required permissions. Don't use this parameter for accounts that use multi-factor authentication (MFA).
Before you run the Connect-ExchangeOnline command, store the username and password in a variable (for example, $UserCredential = Get-Credential). Then, use the variable name ($UserCredential) for this parameter.
After the Connect-ExchangeOnline command is complete, the password key in the variable is emptied.
To specify the password for a certificate file, don't use this parameter; use the CertificatePassword parameter instead.
| Type: | PSCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-DelegatedOrganization
The DelegatedOrganization parameter specifies the customer organization that you want to manage (for example, contosoelectronics.onmicrosoft.com). This parameter works only if the customer organization has agreed to your delegated management via the CSP program.
After you successfully authenticate, the cmdlets in this session are mapped to the customer organization, and all operations in this session are done on the customer organization.
Note: Use the primary .onmicrosoft.com domain of the delegated organization for the value of this parameter.
| Type: | String |
| Position: | 4 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Device
Note: This parameter is available in version 2.0.4 or later of the module, and only in PowerShell 7.
The Device switch is typically used on computers without web browsers. You don't need to specify a value with this switch.
Using this switch results in an on-screen message that contains the URL https://microsoft.com/devicelogin and a unique code. On any other device with a web browser and internet access, open the URL, enter the unique code, and enter your credentials in the subsequent pages.
If your login was successful, the PowerShell connection continues.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-EnableErrorReporting
The EnableErrorReporting switch specifies whether to enable error reporting. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ExchangeEnvironmentName
The ExchangeEnvironmentName specifies the Exchange Online environment and eliminates the need to use the AzureADAuthorizationEndpointUri and ConnectionUri parameters. The following Exchange Online PowerShell environments are supported:
- Microsoft 365 or Microsoft 365 GCC: Don't use this parameter. The required value is
O365Default, but that's also the default value, so you don't need to use this parameter. - Office 365 Germany:
O365GermanyCloud - Office 365 operated by 21Vianet:
O365China - Microsoft 365 GCC High:
O365USGovGCCHigh - Microsoft 365 DoD:
O365USGovDoD
| Type: | ExchangeEnvironment |
| Position: | 2 |
| Default value: | O365Default |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-FormatTypeName
The FormatTypeName parameter specifies the output format of the cmdlet.
| Type: | String[] |
| Position: | 7 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-InlineCredential
Note: This parameter is available in version 2.0.4 or later of the module, and only in PowerShell 7.
The InlineCredential switch specifies whether to pass credentials directly in the Windows PowerShell window. You don't need to specify a value with this switch.
This switch is similar to the Credential parameter, but with added security. The InlineCredential switch doesn't require you to store the credentials locally in the script, and you can enter credentials directly in an interactive PowerShell session.
This switch does not work with accounts that use MFA.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-LogDirectoryPath
The LogDirectoryPath parameter specifies the location of the log files. The default location is %TMP%\EXOCmdletTelemetry\EXOCmdletTelemetry-yyyymmdd-hhmmss.csv.
If you specify a custom location and filename that contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-LogLevel
The LogLevel parameter specifies the logging level. Valid values are Default and All.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ManagedIdentity
The ManagedIdentity switch specifies that you're using managed identity to connect. You don't need to specify a value with this switch.
Managed identity connections are currently supported for the following types of Azure resources:
- Azure Automation runbooks
- Azure Virtual Machines
- Azure Virtual Machine Scale Sets
- Azure Functions
You must use this switch with the Organization parameter.
For user-assigned managed identity, you must also use this switch with the ManagedIdentityAccountId parameter.
For more information about connecting with managed identity, see Use Azure managed identities to connect to Exchange Online PowerShell.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ManagedIdentityAccountId
The ManagedIdentityAccountId parameter specifies the user-assigned managed identity that you're using to connect. A valid value for this parameter is the application ID (GUID) of the service principal that corresponds to the user-assigned managed identity in Azure.
You must use this parameter with the Organization parameter and the ManagedIdentity switch.
For more information about connecting with managed identity, see Use Azure managed identities to connect to Exchange Online PowerShell.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Organization
The Organization parameter specifies the organization when you connect using CBA or managed identity. You must use the primary .onmicrosoft.com domain of the organization for the value of this parameter.
For more information about connecting with CBA, see App-only authentication for unattended scripts in the Exchange Online PowerShell module.
For more information about connecting with managed identity, see Use Azure managed identities to connect to Exchange Online PowerShell.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-PageSize
The PageSize parameter specifies the maximum number of entries per page. Valid input for this parameter is an integer between 1 and 1000. The default value is 1000.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Prefix
The Prefix parameter specifies a text value to add to the names of Exchange Online PowerShell cmdlets when you connect. For example, Get-InboundConnector becomes Get-ContosoInboundConnector when you use the value Contoso for this parameter.
- The Prefix value can't contain spaces or special characters like underscores or asterisks.
- You can't use the Prefix value EXO. That value is reserved for the nine exclusive Get-EXO* cmdlets that are built into the module.
- The Prefix parameter affects only imported Exchange Online cmdlet names. It doesn't affect the names of cmdlets that are built into the module (for example, Disconnect-ExchangeOnline).
| Type: | String |
| Position: | 5 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-PSSessionOption
Note: This parameter doesn't work in REST API connections.
The PSSessionOption parameter specifies the PowerShell session options to use in your connection to Exchange Online. This parameter works only if you also use the UseRPSSession switch in the same command.
Store the output of the New-PSSessionOption command in a variable (for example, $PSOptions = New-PSSessionOption <Settings>), and use the variable name as the value for this parameter (for example, $PSOptions).
| Type: | PSSessionOption |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ShowBanner
The ShowBanner switch shows or hides the banner message that's displayed when you run Connect-ExchangeOnline. You don't need to specify a value with this switch.
- To show the banner, you don't need to use this switch (the banner is displayed by default).
- To hide the banner, use this exact syntax:
-ShowBanner:$false.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | $true |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ShowProgress
The ShowProgress parameter specifies whether to show or hide the progress bar of imported cmdlets when you connect. Valid values are:
- $true: The progress bar is displayed. This is the default value.
- $false: Currently, this value has no effect.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-SigningCertificate
Note: This parameter is available in version 3.2.0 or later of the module.
The SigningCertificate parameter specifies the client certificate that's used to sign the format files (*.Format.ps1xml) or script module files (.psm1) in the temporary module that Connect-ExchangeOnline creates.
A valid value for this parameter is a variable that contains the certificate, or a command or expression that gets the certificate.
To find the certificate, use the Get-PfxCertificate cmdlet in the Microsoft.PowerShell.Security module or use the Get-ChildItem cmdlet in the certificate (Cert:) drive. If the certificate isn't valid or doesn't have sufficient authority, the command will fail.
| Type: | X509Certificate2 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-SkipLoadingCmdletHelp
Note: This parameter is available in version 3.3.0 or later of the module.
The SkipLoadingCmdletHelp switch avoids downloading the cmdlet help files for REST API connections. You don't need to specify a value with this switch.
When you use this switch, you don't get local help files for any cmdlet.
This switch doesn't work with the UseRPSSession switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-SkipLoadingFormatData
The SkipLoadingFormatData switch avoids downloading the format data for REST API connections. You don't need to specify a value with this switch.
When you use this switch, the output of any Exchange cmdlet will be unformatted.
Use this switch to avoid errors when connecting to Exchange Online PowerShell from within a Windows service or the Windows PowerShell SDK.
This switch doesn't work with the UseRPSSession switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-TrackPerformance
The TrackPerformance parameter measures additional events (for example, CPU load and memory consumed). Valid values are:
- $true: Performance tracking is enabled.
- $false: Performance tracking is disabled. This is the default value.
This parameter works only when logging is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-UseMultithreading
The UseMultithreading parameter specifies whether to disable or enable multi-threading in the Exchange Online PowerShell module. Valid values are:
- $true: Enable multi-threading. This is the default value.
- $false: Disable multi-threading. This value will degrade the performance of the nine exclusive Get-EXO* cmdlets in the module.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-UserPrincipalName
The UserPrincipalName parameter specifies the account that you want to use to connect (for example, navin@contoso.onmicrosoft.com). Using this parameter allows you to skip entering a username in the modern authentication credentials prompt (you're prompted to enter a password).
If you use the UserPrincipalName parameter, you don't need to use the AzureADAuthorizationEndpointUri parameter for MFA or federated users in environments that normally require it (UserPrincipalName or AzureADAuthorizationEndpointUri is required; OK to use both).
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-UseRPSSession
Note: Remote PowerShell connections to Exchange Online PowerShell are deprecated. For more information, see Deprecation of Remote PowerShell in Exchange Online.
The UseRPSSession switch allows you to connect to Exchange Online PowerShell using traditional remote PowerShell access to all cmdlets. You don't need to specify a value with this switch.
This switch requires that Basic authentication is enabled in WinRM on the local computer. For more information, see Turn on Basic authentication in WinRM.
If you don't use this switch, REST API mode is used for the connection, so Basic authentication in WinRM isn't required.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for