Set-VMNetworkAdapterFailoverConfiguration
Configures the IP address of a virtual network adapter to be used when a virtual machine fails over.
Syntax
Set-VMNetworkAdapterFailoverConfiguration
[-VMName] <String>
[-VMNetworkAdapterName <String>]
[-ComputerName <String[]>]
[-IPv4Address <String>]
[-IPv6Address <String>]
[-IPv4SubnetMask <String>]
[-IPv6SubnetPrefixLength <Int32>]
[-IPv4PreferredDNSServer <String>]
[-IPv4AlternateDNSServer <String>]
[-IPv6PreferredDNSServer <String>]
[-IPv6AlternateDNSServer <String>]
[-IPv4DefaultGateway <String>]
[-IPv6DefaultGateway <String>]
[-ClearFailoverIPv4Settings]
[-ClearFailoverIPv6Settings]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-VMNetworkAdapterFailoverConfiguration
[-VMNetworkAdapter] <VMNetworkAdapterBase>
[-IPv4Address <String>]
[-IPv6Address <String>]
[-IPv4SubnetMask <String>]
[-IPv6SubnetPrefixLength <Int32>]
[-IPv4PreferredDNSServer <String>]
[-IPv4AlternateDNSServer <String>]
[-IPv6PreferredDNSServer <String>]
[-IPv6AlternateDNSServer <String>]
[-IPv4DefaultGateway <String>]
[-IPv6DefaultGateway <String>]
[-ClearFailoverIPv4Settings]
[-ClearFailoverIPv6Settings]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-VMNetworkAdapterFailoverConfiguration
[-VM] <VirtualMachine>
[-VMNetworkAdapterName <String>]
[-IPv4Address <String>]
[-IPv6Address <String>]
[-IPv4SubnetMask <String>]
[-IPv6SubnetPrefixLength <Int32>]
[-IPv4PreferredDNSServer <String>]
[-IPv4AlternateDNSServer <String>]
[-IPv6PreferredDNSServer <String>]
[-IPv6AlternateDNSServer <String>]
[-IPv4DefaultGateway <String>]
[-IPv6DefaultGateway <String>]
[-ClearFailoverIPv4Settings]
[-ClearFailoverIPv6Settings]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-VMNetworkAdapterFailoverConfiguration cmdlet sets the configuration of an IP address of a virtual network adapter to be used when a virtual machine fails over.
Examples
Example 1
PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -IPv4Address 10.100.1.100 -IPv4SubnetMask 255.255.255.0This example configures a failover IPv4 address for virtual network adapter NetworkAdapter01 on virtual machine VM01.
Example 2
PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -ClearFailoverIPv4SettingsThis example clears the current failover IPv4 settings on virtual network adapter NetworkAdapter01 for virtual machine VM01.
Example 3
PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -Ipv6Address aaaa:aaaa:aaaa:aaaa:aaaa:aaaa:aaa:aaaa -Ipv6SubnetPrefixLength 12This example configures an IPv6 address and a prefix length of 12 for a virtual network adapter NetworkAdapter01 for virtual machine VM01.
Example 4
PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -ClearFailoverIPv6SettingsThis example clears the current failover IPv6 settings on a virtual network adapter NetworkAdapter01 for virtual machine VM01.
Parameters
-ClearFailoverIPv4Settings
Clears the configured IPv4 failover settings. The IPv4 address configured in the primary virtual machine (static or dynamic) will be used by the Replica virtual machine.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearFailoverIPv6Settings
Clears the configured IPv6 failover settings. The IPv6 address configured in the primary virtual machine (static or dynamic) will be used by the Replica virtual machine.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies one or more Hyper-V hosts on which the IP address configuration of a virtual network adapter is to be set. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer - use "localhost" or a dot (".") to specify the local computer explicitly.
| Type: | String[] |
| Position: | Named |
| Default value: | . |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4Address
Specifies the IPv4 address to set on the VMNetworkAdapter for use on failover of the virtual machine. You must also specify the IPv4SubnetMask parameter when you specify this parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4AlternateDNSServer
Specifies the IPv4 alternate DNS server to be set on the VMNetworkAdapter for use on failover of the virtual machine.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4DefaultGateway
Specifies the IPv4 default gateway to be set on VMNetworkAdapter for use on failover of the virtual machine..
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4PreferredDNSServer
Specifies the IPv4 preferred DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv4SubnetMask
Specifies the IPv4 subnet mask to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv4Address parameter when you specify this parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv6Address
Specifies the IPv6 address to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv6SubnetPrefixLength parameter when you specify this parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv6AlternateDNSServer
Specifies the IPv6 alternate DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv6DefaultGateway
Specifies the IPv6 default gateway to be set on VMNetworkAdapter for use on failover of the virtual machine.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv6PreferredDNSServer
Specifies the IPv6 preferred DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPv6SubnetPrefixLength
Specifies the IPv6 subnet prefix length to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv6Address parameter when you specify this parameter.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Specifies that a Microsoft.HyperV.PowerShell.VMNetworkAdapterFailoverConfiguration object is to be passed through to the pipeline representing the IP address configuration to be set.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VM
Specifies the virtual machine for which you want to configure the IP address.
| Type: | VirtualMachine |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-VMName
Specifies the friendly name of the virtual machine for which you want to configure the IP address.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-VMNetworkAdapter
Specifies the virtual network adapter for which you want to configure the IP address.
| Type: | VMNetworkAdapterBase |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-VMNetworkAdapterName
Specifies the name of the virtual network adapter for which you want to set the IP address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
None by default; Microsoft.HyperV.PowerShell.VMNetworkAdapterFailoverConfiguration if -PassThru is specified.