Set-VMReplicationServer

Reference

Module:: Hyper-V

Configures a host as a Replica server.

Syntax

Set-VMReplicationServer
   [[-ReplicationEnabled] <Boolean>]
   [[-AllowedAuthenticationType] <RecoveryAuthenticationType>]
   [[-ReplicationAllowedFromAnyServer] <Boolean>]
   [-CertificateThumbprint <String>]
   [-DefaultStorageLocation <String>]
   [-KerberosAuthenticationPort <Int32>]
   [-CertificateAuthenticationPort <Int32>]
   [-MonitoringInterval <TimeSpan>]
   [-MonitoringStartTime <TimeSpan>]
   [-Force]
   [-PassThru]
   [-ComputerName <String[]>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-VMReplicationServer
   [[-ReplicationEnabled] <Boolean>]
   [[-AllowedAuthenticationType] <RecoveryAuthenticationType>]
   [[-ReplicationAllowedFromAnyServer] <Boolean>]
   [-CertificateThumbprint <String>]
   [-DefaultStorageLocation <String>]
   [-KerberosAuthenticationPortMapping <Hashtable>]
   [-CertificateAuthenticationPortMapping <Hashtable>]
   [-MonitoringInterval <TimeSpan>]
   [-MonitoringStartTime <TimeSpan>]
   [-Force]
   [-PassThru]
   [-ComputerName <String[]>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-VMReplicationServer cmdlet configures a host as a Replica server and enables you to specify the types of authentication and ports to use for incoming replication traffic.

To restrict the replication traffic that the Replica server will accept by allowing it only from specific servers, use the New-VMReplicationAuthorizationEntry cmdlet.

Examples

Example 1

PS C:\>  Set-VMReplicationServer $true -AllowedAuthenticationType Kerberos

This example configures the local host as a Replica server and specifies Kerberos for authentication.

Example 2

PS C:\>  Set-VMReplicationServer -ReplicationEnabled $true -AllowedAuthenticationType Kerberos -ReplicationAllowedFromAnyServer $true -DefaultStorageLocation d:\DefaultReplicaStorage

This example configures a Replica server that accepts replication from all authenticated servers and uses a default storage location of d:\DefaultReplicaStorage.

Example 3

PS C:\>  Set-VMReplicationServer -MonitoringInterval "12:00:00" -MonitoringStartTime "17:00:00"

This example configures the Replica server with a monitoring interval of 12 hours starting at 17:00 hours.

Example 4

PS C:\> $portmapping = @{"Server1.contoso.com" = 82; "Server2.contoso.com" = 81; "Broker.contoso.com" = 80}
PS C:\> Set-VMReplicationServer -KerberosAuthenticationPortMapping $portmapping

This example configures the nodes of the cluster to receive replication on different ports. The first command declares a variable named portmapping and uses it to store the server names of the nodes and the port to use on each node. The second command configures each node of the cluster to use port mapping for Kerberos authentication using the values stored in the portmapping variable.

Parameters

-AllowedAuthenticationType

Specifies which authentication types the Replica server will use. Allowed values are Kerberos, Certificate, or CertificateAndKerberos.

Type:	RecoveryAuthenticationType
Aliases:	AuthType
Accepted values:	Kerberos, Certificate, CertificateAndKerberos
Position:	1
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CertificateAuthenticationPort

Specifies the port on which the Replica server will receive replication data using certificate-based authentication. This parameter can be set only when the value of the AllowedAuthType parameter is Certificate or CertificateAndKerberos.

Type:	Int32
Aliases:	CertAuthPort
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CertificateAuthenticationPortMapping

When using Hyper-V Replica with failover clustering and certificate-based authorization, you can use this parameter to specify a different port for each node of the cluster to receive replication. We recommend that you specify a unique port for each node of the cluster, and one unique port for the Hyper-V Replica Broker. This parameter can be set only when the Replica server is configured with an authentication type of Certificate or CertificateAndKerberos.

Type:	Hashtable
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CertificateThumbprint

Specifies the certificate to use for mutual authentication of the replication data. This parameter is required only when Certificate is specified as the type of authentication. Specify the thumbprint of a valid computer certificate from the Personal store.

The certificate must have all of the following properties to be valid:

It must not be expired.
It must include both client and server authentication extensions for extended key usage (EKU), and an associated private key.
It must terminate at a valid root certificate.
It must meet the requirements for the subject common name (CN): -- For servers that are not clustered, the subject common name (CN) must be equal to, or subject alternative name (DNS Name) should contain, the FQDN of the host. -- For servers that are clustered, each node must have two certificates - one in which the subject common name (CN) or subject alternative name (DNS Name) is the name of the node, and the other in which subject common name (CN) or subject alternative name (DNS Name) is FQDN of the Hyper-V Replica Broker.

To display a list of certificates in the computer's My store and the thumbprint of each certificate, run the following commands:

PS C:\\\> cd cert:\LocalMachine\My PS C:\\\> dir | format-list

For more information about certificate stores, see Certificate stores.

Type:	String
Aliases:	Thumbprint
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-ComputerName

Configures Replica server settings for one or more Hyper-V hosts. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.

Type:	String[]
Position:	Named
Default value:	.
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DefaultStorageLocation

Specifies the default location to store the virtual hard disk files when a Replica virtual machine is created. You must specify this parameter when ReplicationAllowedFromAnyServer is True.

Type:	String
Aliases:	StorageLoc
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Force

Specifies whether the command runs without requiring confirmation.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-KerberosAuthenticationPort

Specifies the port that the HTTP listener uses on the Replica server host.

Type:	Int32
Aliases:	KerbAuthPort
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-KerberosAuthenticationPortMapping

When using Hyper-V Replica with failover clustering and Kerberos authorization, you can use this parameter to specify a different port for each node of the cluster to receive replication. We recommend that you specify a unique port for each node of the cluster, and one unique port for the Hyper-V Replica Broker. This parameter can be set only when the Replica server is configured with an authentication type of either Kerberos or CertificateAndKerberos.

Type:	Hashtable
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MonitoringInterval

Specifies how often (the monitoring interval) replication statistics are computed. Valid values are: 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 8 hours, 12 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days. Specify in the format days:hours:minutes:seconds, such as 01:00:00 for 1 hour, or 1.00:00:00 for 1 day.

Type:	TimeSpan
Position:	Named
Default value:	24
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MonitoringStartTime

Specifies when the monitoring interval starts.

Type:	TimeSpan
Position:	Named
Default value:	9 AM
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PassThru

Specifies that a VMReplicationServer object is to be passed through to the pipeline representing the replication settings of the Replica server.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ReplicationAllowedFromAnyServer

Specifies whether to accept replication requests from any server. When specified as true, DefaultStorageLocation must also be specified. The default storage location and DEFAULT trust group tag are used for virtual machine replicas.

Type:	Boolean
Aliases:	AllowAnyServer
Position:	2
Default value:	True
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ReplicationEnabled

Specifies whether the host is enabled as a Replica server.

Type:	Boolean
Aliases:	RepEnabled
Position:	0
Default value:	True
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Outputs

None

Default

VMRecoveryServer

If -PassThru is specified.

Share via