Add-IpamSubnet

Reference

Module:: IpamServer

Adds a subnet to IPAM.

Syntax

Add-IpamSubnet
   [-Name] <String>
   [-NetworkId] <String>
   [-NetworkType <VirtualizationType>]
   [-AddressSpace <String>]
   [-Owner <String>]
   [-Description <String>]
   [-VlanId <UInt16[]>]
   [-VmmLogicalNetwork <String>]
   [-NetworkSite <String>]
   [-VirtualSubnetId <UInt32>]
   [-CustomConfiguration <String>]
   [-PassThru]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Add-IpamSubnet cmdlet adds an IP subnet to an IP Address Management (IPAM) server. Use the cmdlet to add a NonVirtualized, Provider or Customer IP subnet in IPAM. If the network type of the subnet to add is Provider or NonVirtualized, the cmdlet will add it to the default address space, unless you specify an address space. If the network type of the range to add is Customer, you must specify an address space.

You can associate virtualized subnets, either provider or customer, with a logical network and a network site. These properties represent an abstraction of a physical network and are inherited by all ranges and addresses that map to this subnet.

Examples

Example 1: Add a subnet

PS C:\>Add-IpamSubnet -Name Contoso_2 -NetworkId 10.12.0.0/16 -VlanId 13,10 -PassThru

Name                 : Contoso_2

NetworkId            : 10.12.0.0/16

NetworkType          : NonVirtualized

Overlapping          : False

NetworkSite          :

VmmLogicalNetwork    :

ProviderAddressSpace : Default

CustomerAddressSpace :

VlanId               : {13, 10}

Owner                :

This command adds an IPv4 subnet and associates it with VLANs.

Example 2: Add a subnet to the default address space

PS C:\>Add-IpamSubnet -Name Contoso_3 -NetworkId 10.13.0.0/16 -NetworkType Provider -VmmLogicalNetwork Storage -NetworkSite Site03 -VlanId 13,10 -PassThru

Name                 : Contoso_3

NetworkId            : 10.13.0.0/16

NetworkType          : Provider

Overlapping          : False

NetworkSite          : Site03

VmmLogicalNetwork    : Storage

ProviderAddressSpace : Default

CustomerAddressSpace :

VlanId               : {13, 10}

Owner                :

This command adds an IPV4 subnet with network type provider to the default address space.

Example 3: Add a subnet for a customer network type

PS C:\>Add-IpamSubnet -Name Contoso_3 -NetworkId 10.13.0.0/16 -NetworkType Customer -AddressSpace NetCat -VmmLogicalNetwork Storage -NetworkSite Site03 -VirtualSubnetId 10 -PassThru

Name                 : Contoso_3

NetworkId            : 10.13.0.0/16

NetworkType          : Customer

Overlapping          : False

NetworkSite          : Site03

VmmLogicalNetwork    : Storage

ProviderAddressSpace : ContosoDatacenter

CustomerAddressSpace : NetCat

VlanId               : {13, 10}

Owner                :

This command adds an IPv4 subnet with network type customer.

Example 4: Add a subnet and attach metadata

PS C:\>Add-IpamSubnet -Name Contosov6_10 -NetworkId 2001:db8::ff00/120 -CustomConfiguration "Country=United States;ADSite=Site01" | Format-List Name, NetworkId, Overlapping, CustomConfiguration

Name                : Contosov6_10

NetworkId           : 2001:db8::ff00/120

Overlapping         : False

CustomConfiguration : Country=United States;ADSite=Site01;

This command adds physical subnets and attaches AD Site metadata to the subnets.

Parameters

-AddressSpace

Specifies an address space to which this IP address subnet belongs. If you not specify an address space, the cmdlet retrieves data for all address spaces configured in IPAM.

Type:	String
Position:	Named
Default value:	Default
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-AsJob

ps_cimcommon_asjob

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:	CimSession[]
Aliases:	Session
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CustomConfiguration

Specifies semicolon-separated name/value pairs. This parameter specifies custom metadata that is associated with the address space.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-Description

Specifies a description of the subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-Name

Specifies a name for the subnet.

Type:	String
Position:	1
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkId

Specifies the network and the prefix for the given subnet. Specify the network ID in Classless Interdomain Routing (CIDR) notation in the format Network/Prefix.

Type:	String
Position:	2
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkSite

Specifies a network site that is associated with a logical network and forms an abstraction of the physical network. A logical network can contain many network sites. This property is inherited by all ranges and addresses associated with the given subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkType

Specifies an array of network types for the addresses to add. The acceptable values for this parameter are:

Provider -- Customer -- NonVirtualized

If the value of the AddressSpace parameter is Default, then this parameter can take the value Provider or NonVirtualized. If the value of the AddressSpace parameter is Provider, then the value of this parameter, if specified, must be Provider. Specifying any other value for this parameter will result in an error. Similarly, if the value of the AddressSpace parameter is Customer, then the value of this parameter, if specified, must be Customer. Specifying any other value for this parameter will result in an error.

If you do not specify this parameter, the network type defaults to NonVirtualized.

Type:	VirtualizationType
Accepted values:	NonVirtualized, Provider, Customer
Position:	Named
Default value:	NonVirtualized
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-Owner

Specifies the name of an owner for the subnet.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VirtualSubnetId

Specifies a virtual subnet ID. When you use network virtualization, this property, along with Customer address and Provider address is used to route packets to a particular customer VM.

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-VlanId

Specifies an array of unique identifiers for VLANs.

Type:	UInt16[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-VmmLogicalNetwork

Specifies the abstraction of a physical network that describes a particular function in your environment such as backend or frontend.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Outputs

CimInstance

Represents an IP Subnet in IPAM Server.

Share via

Add-IpamSubnet

Syntax

Description

Examples

Example 1: Add a subnet

Example 2: Add a subnet to the default address space

Example 3: Add a subnet for a customer network type

Example 4: Add a subnet and attach metadata

Parameters

-AddressSpace

-AsJob

-CimSession

-Confirm

-CustomConfiguration

-Description

-Name

-NetworkId

-NetworkSite

-NetworkType

-Owner

-PassThru

-ThrottleLimit

-VirtualSubnetId

-VlanId

-VmmLogicalNetwork

-WhatIf

Outputs

Feedback

Additional resources

Share via

Add-IpamSubnet

Syntax

Description

Examples

Example 1: Add a subnet

Example 2: Add a subnet to the default address space

Example 3: Add a subnet for a customer network type

Example 4: Add a subnet and attach metadata

Parameters

-AddressSpace

-AsJob

-CimSession

-Confirm

-CustomConfiguration

-Description

-Name

-NetworkId

-NetworkSite

-NetworkType

-Owner

-PassThru

-ThrottleLimit

-VirtualSubnetId

-VlanId

-VmmLogicalNetwork

-WhatIf

Outputs

Related Links

Feedback

Additional resources