The Connect-IscsiTarget cmdlet initiates a connection to the specified iSCSI target device.
Examples
Example 1: Disconnect and connect to an iSCSI target
The first command gets iSCSI targets by using the **Get-IscsiTarget** cmdlet.The second command gets iSCSI targets, and then stores them in the $Target variable. The third command disconnects the iSCSI target identified by its **NodeAddress** by using the **Disconnect-IscsiTarget** cmdlet. The final command connections the iSCSI target identified by its **NodeAddress**.
PS C:\> Get-IscsiTarget
IsConnected NodeAddress
----------- -----------
True iqn.1991-05.com.contoso:testiscsi-deepcore-target
PS C:\> $Target = Get-IscsiTarget
PS C:\> Disconnect-IscsiTarget -NodeAddress $Target.NodeAddress
Confirm
Are you sure you want to perform this action?
Performing operation '' on Target ''.
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): **Y**
PS C:\> Connect-IscsiTarget -NodeAddress $Target.NodeAddress
AuthenticationType : NONE
InitiatorInstanceName : ROOT\ISCSIPRT\0000_0
InitiatorNodeAddress : iqn.1991-05.com.contoso:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370000
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-400001370000000b
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0100
This example connects an iSCSI target, collects information about the target, and stores it in a variable, disconnects, and then connects using this cmdlet.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-AuthenticationType
Specifies the type of authentication to use when logging into the target.
The acceptable values for this parameter are:
NONE
ONEWAYCHAP
MUTUALCHAP
The default value is None. Authentication type must be in uppercase.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-ChapSecret
Specifies the CHAP secret to use when establishing a connection authenticated by using CHAP.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-ChapUsername
Specifies the user name to use when establishing a connection authenticated by using Mutual CHAP.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-CimSession
Runs the cmdlet in a remote session or on a remote computer.
Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet.
The default is the current session on the local computer.
Parameter properties
Type:
CimSession[]
Default value:
None
Supports wildcards:
False
DontShow:
False
Aliases:
Session
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-InitiatorInstanceName
Specifies the name of the initiator instance that the iSCSI initiator service uses to send SendTargets requests to the target portal.
If no instance name is specified, the iSCSI initiator service chooses the initiator instance.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-InitiatorPortalAddress
Specifies the IP address or DNS name that is associated with the portal.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-InputObject
Specifies the input to this cmdlet.
You can use this parameter, or you can pipe the input to this cmdlet.
Parameter properties
Type:
CimInstance[]
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByObject
Position:
Named
Mandatory:
True
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-IsDataDigest
Indicates whether this cmdlet enables data digest when the initiator logs into the target portal.
If you do not specify this parameter, the digest setting is determined by the initiator kernel mode driver.
Parameter properties
Type:
Boolean
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-IsHeaderDigest
Indicates whether this cmdlet enables header digest when the initiator logs into the target portal.
If you do not specify this parameter, the digest setting is determined by the initiator kernel mode driver.
Parameter properties
Type:
Boolean
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-IsMultipathEnabled
Indicates whether the initiator has enabled Multipath I/O (MPIO) and uses it when logging into the target portal.
Parameter properties
Type:
Boolean
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-IsPersistent
Indicates whether the session is to be automatically connected after each restart.
Parameter properties
Type:
Boolean
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByNodeAddress
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-NodeAddress
Specifies the IQN of the discovered target.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByNodeAddress
Position:
Named
Mandatory:
True
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-ReportToPnP
Indicates whether the operation is reported to PNP.
Parameter properties
Type:
Boolean
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-TargetPortalAddress
Specifies the IP address or DNS name of the target portal.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Aliases:
TA
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-TargetPortalPortNumber
Specifies the TCP/IP port number for the target portal.
By default, the port number is 3260.
Parameter properties
Type:
UInt16
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
Type:
Int32
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
-InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable,
-ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see
about_CommonParameters.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.