Get-IscsiTargetPortal
Gives the list of target portals which have been set for discovery.
Syntax
Get-IscsiTargetPortal
[-InitiatorPortalAddress <String[]>]
[[-TargetPortalAddress] <String[]>]
[-InitiatorInstanceName <String[]>]
[-TargetPortalPortNumber <UInt16[]>]
[-IsHeaderDigest <Boolean[]>]
[-IsDataDigest <Boolean[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Get-IscsiTargetPortal
[-iSCSISession <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Get-IscsiTargetPortal
[-iSCSIConnection <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Get-IscsiTargetPortal
[-iSCSITarget <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Description
The Get-IscsiTargetPortal cmdlet gets information about iSCSI target portals.
Examples
EXAMPLE 1
PS C:\>Get-IscsiTargetPortal -TargetPortalAddress testIscsi
InitiatorInstanceName :
InitiatorNodeAddress :
InitiatorPortalAddress :
InititorIPAdressListNumber : 4294967295
IsDataDigest : False
IsHeaderDigest : False
TargetPortalAddress : testIscsi
TargetPortalPortNumber : 3260
This example adds a new iSCSI target portal with the name testiSCSI to perform discovery.
Parameters
-AsJob
ps_cimcommon_asjob
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InitiatorInstanceName
Specifies the name of the initiator instance that the iSCSI initiator service uses to send SendTargets requests to the target portal. If no instance name is specified, the iSCSI initiator service chooses the initiator instance.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-InitiatorPortalAddress
Represents the IP address or DNS name associated with the portal.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-iSCSIConnection
Accepts a MSFT iSCSI connection object as an input. The MSFT iSCSI connection object is output from the Get-IscsiConnection cmdlet.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-iSCSISession
Accepts a MSFT iSCSI session object as an input. The MSFT iSCSI session object is output from the Get-IscsiSession cmdlet.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-iSCSITarget
Accepts a MSFT iSCSI target object as an input. The MSFT iSCSI target object is output from the Get-IscsiTarget cmdlet.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-IsDataDigest
Enables data digest when the initiator logs into the target portal. By not specifying this parameter, the digest setting is determined by the initiator kernel mode driver.
Type: | Boolean[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-IsHeaderDigest
Enables header digest when the initiator logs into the target portal. By not specifying this parameter, the digest setting is determined by the initiator kernel mode driver.
Type: | Boolean[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-TargetPortalAddress
Represents the IP address or DNS name of the target portal.
Type: | String[] |
Position: | 0 |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-TargetPortalPortNumber
Specifies the TCP/IP port number for the target portal.
By default, the port number is 3260
.
Type: | UInt16[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Related Links
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for