Set-NetAdapterBinding
Sets the binding state of a transport or filter on a network adapter.
Syntax
Set-NetAdapterBinding
[-Name] <String[]>
[-ComponentID <String[]>]
[-DisplayName <String[]>]
[-IncludeHidden]
[-AllBindings]
[-Enabled <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Set-NetAdapterBinding
-InterfaceDescription <String[]>
[-ComponentID <String[]>]
[-DisplayName <String[]>]
[-IncludeHidden]
[-AllBindings]
[-Enabled <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Set-NetAdapterBinding
-InputObject <CimInstance[]>
[-Enabled <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-NetAdapterBinding cmdlet sets the binding state of a transport or filter on a network adapter. By default only visible bindings are set unless the AllBindings parameter is specified. If only enabling or disabling bindings, then the Enable-NetAdapterBinding or Disable-NetAdapterBinding cmdlets can be used. Note: Disabling and enabling a network adapter binding can automatically enable or disable other network adapter bindings.
Examples
EXAMPLE 1
PS C:\>Set-NetAdapterBinding -Name MyAdapter -DisplayName "Internet Protocol Version 4 (TCP/IPv4)" -Enabled $true
This example enables TCP/IPv4 on the network adapter named MyAdapter.
EXAMPLE 2
PS C:\>Set-NetAdapterBinding -Name MyAdapter -DisplayName "Internet Protocol Version 4 (TCP/IPv4)" -Enabled $false
This is a version of the cmdlet that disables TCP/IPv4 on the network adapter named MyAdapter using wildcard characters in the display name.
PS C:\>Set-NetAdapterBinding -Name MyAdapter -DisplayName "Inter* (TCP/IPv4)" -Enabled $false
This example disables TCP/IPv4 on the network adapter named MyAdapter.
EXAMPLE 3
PS C:\>Set-NetAdapterBinding -Name MyAdapter -ComponentID ms_tcpip -Enabled $true
This example enables TCPv4/IPv4 on the network adapter named MyAdapter using the component ID.
Parameters
-AllBindings
Sets filters or transports that are not visible by default.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AsJob
ps_cimcommon_asjob
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ComponentID
Specifies the underlying name of the transport or filter in the following form.
? ms_xxxx
, such as ms_tcpip
.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-DisplayName
Specifies the transport or filter name shown in the Networking tab under the network adapter properties in Windows Server® 2012 and later.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Enabled
Sets the enabled state of the transport or filter.
The acceptable values for this parameter are: $true
or $false
.
Type: | Boolean |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Type: | CimInstance[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-InterfaceDescription
Specifies the network adapter interface description.
For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
Type: | String[] |
Aliases: | ifDesc, InstanceID |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Name
Specifies the name of the network adapter.
Type: | String[] |
Aliases: | ifAlias, InterfaceAlias |
Position: | 0 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.