Remove-NetTransportFilter
Removes transport filters.
Syntax
ByName
Remove-NetTransportFilter
[-SettingName <String[]>]
[-Protocol <Protocol[]>]
[-LocalPortStart <UInt16[]>]
[-LocalPortEnd <UInt16[]>]
[-RemotePortStart <UInt16[]>]
[-RemotePortEnd <UInt16[]>]
[-DestinationPrefix <String[]>]
[-AssociatedTCPSetting <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
InputObject (cdxml)
Remove-NetTransportFilter
-InputObject <CimInstance[]>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Remove-NetTransportFilter cmdlet removes transport filters.
Examples
Example 1: Remove transport filters for a setting name
PS C:\>Remove-NetTransportFilter -SettingName Custom
This command removes all of the transport filters on the server that have the setting name of Custom.
Example 2: Remove transit filters for objects with a specified congestion window
PS C:\>Get-NetTCPSetting -InitialCongestionWindowMss 4 | Remove-NetTransportFilter
This command uses the Get-NetTCPSetting cmdlet to get all of the NetTcpSetting objects that have an initial congestion window of 4 maximum segment size (MSS) units, and then passes them to the current cmdlet by using the pipeline operator. The command removes transport filters for these settings.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AssociatedTCPSetting
Specifies a NetTCPSetting object. The cmdlet removes transport filters associated with the setting that you specify. To obtain a NetTCPSetting object, use the Get-NetTCPSetting cmdlet.
Parameter properties
| Type: | CimInstance |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DestinationPrefix
Specifies an array of destination prefixes of IP routes. The cmdlet removes transport filters that have the prefixes that you specify. A destination prefix consists of an IP address prefix and a prefix length, separated by a slash (/).
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Parameter properties
| Type: | CimInstance[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
InputObject (cdxml)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LocalPortEnd
Specifies an array of upper bounds of ranges of local TCP ports. The cmdlet removes transport filters that have the upper bounds that you specify.
Parameter properties
| Type: | UInt16[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LocalPortStart
Specifies an array of lower bounds of ranges of local TCP ports. The cmdlet removes transport filters that have the lower bounds that you specify.
Parameter properties
| Type: | UInt16[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Protocol
Specifies an array of types of routing protocols. The cmdlet removes transport filters based on the protocols that you specify. The acceptable values for this parameter are:
- Bbn
- Bgp
- Dhcp
- Dvmrp
- Egp
- Eigrp
- EsIs
- Ggp
- Hello
- Icmp
- Idpr
- Igrp
- IsIs
- Local
- NetMgmt
- Ospf
- Rip
- Rpl
- Other
Parameter properties
| Type: | Protocol[] |
| Default value: | None |
| Accepted values: | TCP, UDP |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemotePortEnd
Specifies an array of upper bounds of ranges of remote TCP ports. The cmdlet removes transport filters that have the upper bounds that you specify.
Parameter properties
| Type: | UInt16[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemotePortStart
Specifies an array of lower bounds of ranges of remote TCP ports. The cmdlet removes transport filters that have the lower bounds that you specify.
Parameter properties
| Type: | UInt16[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SettingName
Specifies an array of setting names. The cmdlet removes transport filters that have the settings that you specify. The acceptable values for this parameter are:
- Internet
- Datacenter
- Compat
- Custom
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.