Edit

Share via

Add-NlbClusterPortRule

  • Reference
Module:
NetworkLoadBalancingClusters

Adds a new port rule to a Network Load Balancing (NLB) cluster.

Syntax

Add-NlbClusterPortRule
   [-HostName <String>]
   -InterfaceName <String>
   [-IP <IPAddress>]
   [-Protocol <PortRuleProtocol>]
   [-StartPort] <Int32>
   [-EndPort] <Int32>
   [-Mode <PortRuleFilteringMode>]
   [-Affinity <PortRuleAffinity>]
   [-Timeout <UInt32>]
   [<CommonParameters>]
Add-NlbClusterPortRule
   -InputObject <Cluster[]>
   [-IP <IPAddress>]
   [-Protocol <PortRuleProtocol>]
   [-StartPort] <Int32>
   [-EndPort] <Int32>
   [-Mode <PortRuleFilteringMode>]
   [-Affinity <PortRuleAffinity>]
   [-Timeout <UInt32>]
   [<CommonParameters>]

Description

The Add-NlbClusterPortRule cmdlet adds a new port rule to a Network Load Balancing (NLB) cluster. Port rules control how an NLB cluster functions. To maximize the control of various types of TCP/IP traffic, you can set up port rules to control how each port's cluster-network traffic is handled. The method by which a port's network traffic is handled is called its filtering mode. There are three possible filtering modes: Multiple hosts, Single host, and Disabled. A filtering mode can also apply to a numerical range of ports. You do this by defining a port rule with a set of configuration parameters that define the filtering mode. In addition, you can select one of three options for client affinity: None, Single, or Network. Single and Network are used to ensure that all network traffic from a particular client is directed to the same cluster host. To allow NLB to properly handle IP fragments, you should avoid using None when you select UDP or Both for your protocol setting.

This cmdlet changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.

ps_nlbc_checkstate_remark

Examples

Example 1: Add a new port rule to the local cluster

PS C:\>Get-NlbCluster | Add-NlbClusterPortRule -StartPort 443 -EndPort 443
IPAddress State     Start     End       Protocol  Mode      Affinity  Timeout 
--------- -----     -----     ---       --------  ----      --------  ------- 
All       Enabled   443       443       Both      Multiple  Single    0

This command adds a new port rule to the local cluster. The new port rule covers port 443 only, and uses the default settings for the rest of the port rule parameters.

Example 2: Add a new port rule to the local cluster with no affinity

PS C:\>Get-NlbCluster | Add-NlbClusterPortRule -StartPort 80 -EndPort 80 -Affinity None
IPAddress State     Start     End       Protocol  Mode      Affinity  Timeout 
--------- -----     -----     ---       --------  ----      --------  ------- 
All       Enabled   80        80        Both      Multiple  None      0

This command adds a new port rule to the local cluster. The new port rule covers port 80 only and has no affinity, and uses the default settings for the rest of the port rule parameters.

Parameters

-Affinity

Specifies the type of affinity for the new port rule. The acceptable values for this parameter are:

  • Network
  • None
  • Single
Type:PortRuleAffinity
Aliases:A
Accepted values:Single, None, Network
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-EndPort

Specifies the end port for the new port rule. The acceptable values for this parameter are: 0 through 65535.

Type:Int32
Aliases:E
Position:1
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-HostName

Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of . is entered, then the local cluster is assumed.

Type:String
Aliases:Host, HN, H
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InputObject

Specifies the cluster to which the port rule is added.

Type:Cluster[]
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InterfaceName

Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.

Type:String
Aliases:Interface, IN, I
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-IP

Specifies the IP address for the new cluster port rule.

Type:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Mode

Specifies the filtering mode for the new cluster port rule. The acceptable values for this parameter are:

  • Disabled
  • Multiple
  • Single
Type:PortRuleFilteringMode
Aliases:M
Accepted values:Multiple, Single, Disabled
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Protocol

Specifies the protocol for the new port rule. The acceptable values for this parameter are:

  • Both
  • TCP
  • UDP
Type:PortRuleProtocol
Aliases:PTCL
Accepted values:Both, Tcp, Udp
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-StartPort

Specifies the start port for the new port rule. The acceptable values for this parameter are: 0 through 65535.

Type:Int32
Aliases:S
Position:0
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Timeout

Specifies the timeout in minutes for the new cluster port rule. The acceptable values for this parameter are: 0 through 240.

Type:UInt32
Aliases:T
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

Microsoft.NetworkLoadBalancingClusters.PowerShell.Cluster

Outputs

Microsoft.NetworkLoadBalancingClusters.PowerShell.PortRule