Everything you wanted to know about ShouldProcess

PowerShell functions have several features that greatly improve the way users interact with them. One important feature that is often overlooked is -WhatIf and -Confirm support and it's easy to add to your functions. In this article, we dive deep into how to implement this feature.

Note

The original version of this article appeared on the blog written by @KevinMarquette. The PowerShell team thanks Kevin for sharing this content with us. Please check out his blog at PowerShellExplained.com.

This is a simple feature you can enable in your functions to provide a safety net for the users that need it. There's nothing scarier than running a command that you know can be dangerous for the first time. The option to run it with -WhatIf can make a big difference.

CommonParameters

Before we look at implementing these common parameters, I want to take a quick look at how they're used.

Using -WhatIf

When a command supports the -WhatIf parameter, it allows you to see what the command would have done instead of making changes. it's a good way to test out the impact of a command, especially before you do something destructive.

PS C:\temp> Get-ChildItem
    Directory: C:\temp
Mode                 LastWriteTime         Length Name
----                 -------------         ------ ----
-a----         4/19/2021   8:59 AM              0 importantfile.txt
-a----         4/19/2021   8:58 AM              0 myfile1.txt
-a----         4/19/2021   8:59 AM              0 myfile2.txt

PS C:\temp> Remove-Item -Path .\myfile1.txt -WhatIf
What if: Performing the operation "Remove File" on target "C:\Temp\myfile1.txt".

If the command correctly implements ShouldProcess, it should show you all the changes that it would have made. Here is an example using a wildcard to delete multiple files.

PS C:\temp> Remove-Item -Path * -WhatIf
What if: Performing the operation "Remove File" on target "C:\Temp\myfile1.txt".
What if: Performing the operation "Remove File" on target "C:\Temp\myfile2.txt".
What if: Performing the operation "Remove File" on target "C:\Temp\importantfile.txt".

Using -Confirm

Commands that support -WhatIf also support -Confirm. This gives you a chance confirm an action before performing it.

PS C:\temp> Remove-Item .\myfile1.txt -Confirm

Confirm
Are you sure you want to perform this action?
Performing the operation "Remove File" on target "C:\Temp\myfile1.txt".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

In this case, you have multiple options that allow you to continue, skip a change, or stop the script. The help prompt describes each of those options like this.

Y - Continue with only the next step of the operation.
A - Continue with all the steps of the operation.
N - Skip this operation and proceed with the next operation.
L - Skip this operation and all subsequent operations.
S - Pause the current pipeline and return to the command prompt. Type "exit" to resume the pipeline.
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

Localization

This prompt is localized in PowerShell so the language changes based on the language of your operating system. This is one more thing that PowerShell manages for you.

Switch parameters

Let's take quick moment to look at ways to pass a value to a switch parameter. The main reason I call this out is that you often want to pass parameter values to functions you call.

The first approach is a specific parameter syntax that can be used for all parameters but you mostly see it used for switch parameters. You specify a colon to attach a value to the parameter.

Remove-Item -Path:* -WhatIf:$true

You can do the same with a variable.

$DoWhatIf = $true
Remove-Item -Path * -WhatIf:$DoWhatIf

The second approach is to use a hashtable to splat the value.

$RemoveSplat = @{
    Path = '*'
    WhatIf = $true
}
Remove-Item @RemoveSplat

If you're new to hashtables or splatting, I have another article on that covers everything you wanted to know about hashtables.

SupportsShouldProcess

The first step to enable -WhatIf and -Confirm support is to specify SupportsShouldProcess in the CmdletBinding of your function.

function Test-ShouldProcess {
    [CmdletBinding(SupportsShouldProcess)]
    param()
    Remove-Item .\myfile1.txt
}

By specifying SupportsShouldProcess in this way, we can now call our function with -WhatIf (or -Confirm).

PS> Test-ShouldProcess -WhatIf
What if: Performing the operation "Remove File" on target "C:\Temp\myfile1.txt".

Notice that I did not create a parameter called -WhatIf. Specifying SupportsShouldProcess automatically creates it for us. When we specify the -WhatIf parameter on Test-ShouldProcess, some things we call also perform -WhatIf processing.

Note

When you use SupportsShouldProcess, PowerShell doesn't add the $WhatIf variable to the function. You don't need to check the value of $WhatIf because the ShouldProcess() method takes care of that for you.

Trust but verify

There's some danger here trusting that everything you call inherits -WhatIf values. For the rest of the examples, I'm going to assume that it doesn't work and be very explicit when making calls to other commands. I recommend that you do the same.

function Test-ShouldProcess {
    [CmdletBinding(SupportsShouldProcess)]
    param()
    Remove-Item .\myfile1.txt -WhatIf:$WhatIfPreference
}

I will revisit the nuances much later once you have a better understanding of all the pieces in play.

$PSCmdlet.ShouldProcess

The method that allows you to implement SupportsShouldProcess is $PSCmdlet.ShouldProcess. You call $PSCmdlet.ShouldProcess(...) to see if you should process some logic and PowerShell takes care of the rest. Let's start with an example:

function Test-ShouldProcess {
    [CmdletBinding(SupportsShouldProcess)]
    param()

    $file = Get-ChildItem './myfile1.txt'
    if($PSCmdlet.ShouldProcess($file.Name)){
        $file.Delete()
    }
}

The call to $PSCmdlet.ShouldProcess($file.name) checks for the -WhatIf (and -Confirm parameter) then handles it accordingly. The -WhatIf causes ShouldProcess to output a description of the change and return $false:

PS> Test-ShouldProcess -WhatIf
What if: Performing the operation "Test-ShouldProcess" on target "myfile1.txt".

A call using -Confirm pauses the script and prompts the user with the option to continue. It returns $true if the user selected Y.

PS> Test-ShouldProcess -Confirm
Confirm
Are you sure you want to perform this action?
Performing the operation "Test-ShouldProcess" on target "myfile1.txt".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

An awesome feature of $PSCmdlet.ShouldProcess is that it doubles as verbose output. I depend on this often when implementing ShouldProcess.

PS> Test-ShouldProcess -Verbose
VERBOSE: Performing the operation "Test-ShouldProcess" on target "myfile1.txt".

Overloads

There are a few different overloads for $PSCmdlet.ShouldProcess with different parameters for customizing the messaging. We already saw the first one in the example above. Let's take a closer look at it.

function Test-ShouldProcess {
    [CmdletBinding(SupportsShouldProcess)]
    param()

    if($PSCmdlet.ShouldProcess('TARGET')){
        # ...
    }
}

This produces output that includes both the function name and the target (value of the parameter).

What if: Performing the operation "Test-ShouldProcess" on target "TARGET".

Specifying a second parameter as the operation uses the operation value instead of the function name in the message.

## $PSCmdlet.ShouldProcess('TARGET','OPERATION')
What if: Performing the operation "OPERATION" on target "TARGET".

The next option is to specify three parameters to fully customize the message. When three parameters are used, the first one is the entire message. The second two parameters are still used in the -Confirm message output.

## $PSCmdlet.ShouldProcess('MESSAGE','TARGET','OPERATION')
What if: MESSAGE

Quick parameter reference

Just in case you came here only to figure out what parameters you should use, here is a quick reference showing how the parameters change the message in the different -WhatIf scenarios.

## $PSCmdlet.ShouldProcess('TARGET')
What if: Performing the operation "FUNCTION_NAME" on target "TARGET".

## $PSCmdlet.ShouldProcess('TARGET','OPERATION')
What if: Performing the operation "OPERATION" on target "TARGET".

## $PSCmdlet.ShouldProcess('MESSAGE','TARGET','OPERATION')
What if: MESSAGE

I tend to use the one with two parameters.

ShouldProcessReason

We have a fourth overload that's more advanced than the others. It allows you to get the reason ShouldProcess was executed. I'm only adding this here for completeness because we can just check if $WhatIfPreference is $true instead.

$reason = ''
if($PSCmdlet.ShouldProcess('MESSAGE','TARGET','OPERATION',[ref]$reason)){
    Write-Output "Some Action"
}
$reason

We have to pass the $reason variable into the fourth parameter as a reference variable with [ref]. ShouldProcess populates $reason with the value None or WhatIf. I didn't say this was useful and I have had no reason to ever use it.

Where to place it

You use ShouldProcess to make your scripts safer. So you use it when your scripts are making changes. I like to place the $PSCmdlet.ShouldProcess call as close to the change as possible.

## general logic and variable work
if ($PSCmdlet.ShouldProcess('TARGET','OPERATION')){
    # Change goes here
}

If I'm processing a collection of items, I call it for each item. So the call gets placed inside the foreach loop.

foreach ($node in $collection){
    # general logic and variable work
    if ($PSCmdlet.ShouldProcess($node,'OPERATION')){
        # Change goes here
    }
}

The reason why I place ShouldProcess tightly around the change, is that I want as much code to execute as possible when -WhatIf is specified. I want the setup and validation to run if possible so the user gets to see those errors.

I also like to use this in my Pester tests that validate my projects. If I have a piece of logic that is hard to mock in pester, I can often wrap it in ShouldProcess and call it with -WhatIf in my tests. It's better to test some of your code than none of it.

$WhatIfPreference

The first preference variable we have is $WhatIfPreference. This is $false by default. If you set it to $true then your function executes as if you specified -WhatIf. If you set this in your session, all commands perform -WhatIf execution.

When you call a function with -WhatIf, the value of $WhatIfPreference gets set to $true inside the scope of your function.

ConfirmImpact

Most of my examples are for -WhatIf but everything so far also works with -Confirm to prompt the user. You can set the ConfirmImpact of the function to high and it prompts the user as if it was called with -Confirm.

function Test-ShouldProcess {
    [CmdletBinding(
        SupportsShouldProcess,
        ConfirmImpact = 'High'
    )]
    param()

    if ($PSCmdlet.ShouldProcess('TARGET')){
        Write-Output "Some Action"
    }
}

This call to Test-ShouldProcess is performing the -Confirm action because of the High impact.

PS> Test-ShouldProcess

Confirm
Are you sure you want to perform this action?
Performing the operation "Test-ShouldProcess" on target "TARGET".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): y
Some Action

The obvious issue is that now it's harder to use in other scripts without prompting the user. In this case, we can pass a $false to -Confirm to suppress the prompt.

PS> Test-ShouldProcess -Confirm:$false
Some Action

I'll cover how to add -Force support in a later section.

$ConfirmPreference

$ConfirmPreference is an automatic variable that controls when ConfirmImpact asks you to confirm execution. Here are the possible values for both $ConfirmPreference and ConfirmImpact.

  • High
  • Medium
  • Low
  • None

With these values, you can specify different levels of impact for each function. If you have $ConfirmPreference set to a value higher than ConfirmImpact, then you aren't prompted to confirm execution.

By default, $ConfirmPreference is set to High and ConfirmImpact is Medium. If you want your function to automatically prompt the user, set your ConfirmImpact to High. Otherwise set it to Medium if its destructive and use Low if the command is always safe run in production. If you set it to none, it doesn't prompt even if -Confirm was specified (but it still gives you -WhatIf support).

When calling a function with -Confirm, the value of $ConfirmPreference gets set to Low inside the scope of your function.

Suppressing nested confirm prompts

The $ConfirmPreference can get picked up by functions that you call. This can create scenarios where you add a confirm prompt and the function you call also prompts the user.

What I tend to do is specify -Confirm:$false on the commands that I call when I have already handled the prompting.

function Test-ShouldProcess {
    [CmdletBinding(SupportsShouldProcess)]
    param()

    $file = Get-ChildItem './myfile1.txt'
    if($PSCmdlet.ShouldProcess($file.Name)){
        Remove-Item -Path $file.FullName -Confirm:$false
    }
}

This brings us back to an earlier warning: There are nuances as to when -WhatIf is not passed to a function and when -Confirm passes to a function. I promise I'll get back to this later.

$PSCmdlet.ShouldContinue

If you need more control than ShouldProcess provides, you can trigger the prompt directly with ShouldContinue. ShouldContinue ignores $ConfirmPreference, ConfirmImpact, -Confirm, $WhatIfPreference, and -WhatIf because it prompts every time it's executed.

At a quick glance, it's easy to confuse ShouldProcess and ShouldContinue. I tend to remember to use ShouldProcess because the parameter is called SupportsShouldProcess in the CmdletBinding. You should use ShouldProcess in almost every scenario. That is why I covered that method first.

Let's take a look at ShouldContinue in action.

function Test-ShouldContinue {
    [CmdletBinding()]
    param()

    if($PSCmdlet.ShouldContinue('TARGET','OPERATION')){
        Write-Output "Some Action"
    }
}

This provides us a simpler prompt with fewer options.

Test-ShouldContinue

Second
TARGET
[Y] Yes  [N] No  [S] Suspend  [?] Help (default is "Y"):

The biggest issue with ShouldContinue is that it requires the user to run it interactively because it always prompts the user. You should always be building tools that can be used by other scripts. The way you do this is by implementing -Force. I'll revisit this idea later.

Yes to all

This is automatically handled with ShouldProcess but we have to do a little more work for ShouldContinue. There's a second method overload where we have to pass in a few values by reference to control the logic.

function Test-ShouldContinue {
    [CmdletBinding()]
    param()

    $collection = 1..5
    $yesToAll = $false
    $noToAll = $false

    foreach($target in $collection) {

        $continue = $PSCmdlet.ShouldContinue(
                "TARGET_$target",
                'OPERATION',
                [ref]$yesToAll,
                [ref]$noToAll
            )

        if ($continue){
            Write-Output "Some Action [$target]"
        }
    }
}

I added a foreach loop and a collection to show it in action. I pulled the ShouldContinue call out of the if statement to make it easier to read. Calling a method with four parameters starts to get a little ugly, but I tried to make it look as clean as I could.

Implementing -Force

ShouldProcess and ShouldContinue need to implement -Force in different ways. The trick to these implementations is that ShouldProcess should always get executed, but ShouldContinue should not get executed if -Force is specified.

ShouldProcess -Force

If you set your ConfirmImpact to high, the first thing your users are going to try is to suppress it with -Force. That's the first thing I do anyway.

Test-ShouldProcess -Force
Error: Test-ShouldProcess: A parameter cannot be found that matches parameter name 'force'.

If you recall from the ConfirmImpact section, they actually need to call it like this:

Test-ShouldProcess -Confirm:$false

Not everyone realizes they need to do that and -Force doesn't suppress ShouldContinue. So we should implement -Force for the sanity of our users. Take a look at this full example here:

function Test-ShouldProcess {
    [CmdletBinding(
        SupportsShouldProcess,
        ConfirmImpact = 'High'
    )]
    param(
        [switch]$Force
    )

    if ($Force -and -not $PSBoundParameters.ContainsKey('Confirm')) {
        $ConfirmPreference = 'None'
    }

    if ($PSCmdlet.ShouldProcess('TARGET')) {
        Write-Output "Some Action"
    }
}

We add our own -Force switch as a parameter. The -Confirm parameter is automatically added when using SupportsShouldProcess in the CmdletBinding. However, when you use SupportsShouldProcess, PowerShell doesn't add the $Confirm variable to the function. If you are running in Strict Mode and try to use the $Confirm variable before it has been defined, you get an error. To avoid the error you can use $PSBoundParameters to test if the parameter was passed by the user.

if ($Force -and -not $PSBoundParameters.ContainsKey('Confirm')) {
    $ConfirmPreference = 'None'
}

If the user specifies -Force we set $ConfirmPreference to None in the local scope. If the user also specifies -Confirm then ShoudProcess() honors the values of the -Confirm parameter.

if ($PSCmdlet.ShouldProcess('TARGET')){
    Write-Output "Some Action"
}

If someone specifies both -Force and -WhatIf, then -WhatIf needs to take priority. This approach preserves -WhatIf processing because ShouldProcess always gets executed.

Don't add a test for the $Force value inside the if statement with the ShouldProcess. That is an anti-pattern for this specific scenario even though that's what I show you in the next section for ShouldContinue.

ShouldContinue -Force

This is the correct way to implement -Force with ShouldContinue.

function Test-ShouldContinue {
    [CmdletBinding()]
    param(
        [Switch]$Force
    )

    if($Force -or $PSCmdlet.ShouldContinue('TARGET','OPERATION')){
        Write-Output "Some Action"
    }
}

By placing the $Force to the left of the -or operator, it gets evaluated first. Writing it this way short circuits the execution of the if statement. If $force is $true, then the ShouldContinue is not executed.

PS> Test-ShouldContinue -Force
Some Action

We don't have to worry about -Confirm or -WhatIf in this scenario because they're not supported by ShouldContinue. This is why it needs to be handled differently than ShouldProcess.

Scope issues

Using -WhatIf and -Confirm are supposed to apply to everything inside your functions and everything they call. They do this by setting $WhatIfPreference to $true or setting $ConfirmPreference to Low in the local scope of the function. When you call another function, calls to ShouldProcess use those values.

This actually works correctly most of the time. Anytime you call built-in cmdlet or a function in your same scope, it works. It also works when you call a script or a function in a script module from the console.

The one specific place where it doesn't work is when a script or a script module calls a function in another script module. This may not sound like a big problem, but most of the modules you create or pull from the PSGallery are script modules.

The core issue is that script modules do not inherit the values for $WhatIfPreference or $ConfirmPreference (and several others) when called from functions in other script modules.

The best way to summarize this as a general rule is that this works correctly for binary modules and never trust it to work for script modules. If you aren't sure, either test it or just assume it doesn't work correctly.

I personally feel this is very dangerous because it creates scenarios where you add -WhatIf support to multiple modules that work correctly in isolation, but fail to work correctly when they call each other.

We do have a GitHub RFC working to get this issue fixed. See Propagate execution preferences beyond script module scope for more details.

In closing

I have to look up how to use ShouldProcess every time I need to use it. It took me a long time to distinguish ShouldProcess from ShouldContinue. I almost always need to look up what parameters to use. So don't worry if you still get confused from time to time. This article will be here when you need it. I'm sure I will reference it often myself.

If you liked this post, please share your thoughts with me on Twitter using the link below. I always like hearing from people that get value from my content.