NAT
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/28/2008
This module configures and manages Network Address Translation (NAT) for the Remote Configuration Framework.
The following table shows the configurable settings for NAT.
| Value : Type | Access | Index | Description |
|---|---|---|---|
Public : STRING |
Read-write |
Not applicable |
Specifies the list of network adapters on the public side of the gateway device. |
Private : STRING |
Read-write |
Not applicable |
Specifies the list of network adapters on the private side of the gateway device. |
EnableAddressTranslation : DWORD |
Read-write |
Not applicable |
If this value is set to 1, network address translation (NAT) is enabled. If this value is set to 0, network address translation is disabled. |
EnableDhcpAllocator : DWORD |
Read-write |
Not applicable |
If this value is set to 1, DHCP allocator is enabled. If this value is set to 0, DHCP allocator is disabled. |
EnableDnsProxy : DWORD |
Read-write |
Not applicable |
If this value is set to 1, DNS proxy is enabled. If this value is set to 0, DNS proxy is disabled. |
EnableIGD : DWORD |
Read-write |
Not applicable |
If this value is set to 1, Internet Gateway Device (IGD) is enabled. If this value is set to 0, IGD is disabled. |
DHCPLeaseTime : DWORD |
Read-write |
Not applicable |
Specifies the time, in seconds, for which the lease on this IP adapter is valid. This value is used by DHCP client. The valid range for this value is 1–0xFFFFFFFF. |
NotConfigured : DWORD |
Read-only |
Not applicable |
If this value is set to 1, NAT is not configured. This value does not exist if NAT is enabled and running. |
InternalExposedHost : STRING |
Read-write |
Not applicable |
Specifies the IP address of the internal exposed host. |
DHCPStartAllocation : DWORD |
Read-write |
Not applicable |
Specifies that last digit of the IPv4 address. This value is used as a start value for DHCP. |
DHCPStopAllocation : DWORD |
Read-write |
Not applicable |
Specifies that last digit of the IPv4 address. This value is used as a stop value for DHCP. |
HostName : STRING |
Read-only |
IP |
Specifies the host name for a specific IP address that has been assigned by DHCP allocator. |
MAC : STRING |
Read-only |
IP |
Specifies the MAC address in xx-xx-xx-xx-xx-xx format for a specific IP address. |