PORTFORWARD
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/28/2008
This module implements port forwarding and configures port forwarding rules.
The following table shows the configurable settings for PORTFORWARD.
| Value : Type | Access | Index | Description |
|---|---|---|---|
Port : STRING |
Read-only |
Name |
Specifies the number of the port to forward the traffic to. |
Enabled : DWORD |
Read-write |
Name |
If this value is set to 1, port forwarding is enabled. If this value is set to 0, port forwarding is disabled. |
InternalPort : STRING |
Read-write |
Name |
Specifies the internal port number. |
Protocol : STRING |
Read-write |
Name |
Specifies the network protocol to use. |
InternalName : STRING |
Read-write |
Name |
Specifies the IP address of the device the port is forwarded to. |
Delete : STRING |
Write-only |
Name |
Specifies the rule to be deleted. |