Point-to-Point Protocol over Ethernet (PPPoE) Registry Settings
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/28/2008
The registry stores information that is necessary to configure the system for applications and hardware devices. The registry also contains information that the operating system continually references during operation.
Note
The default registry values vary depending on which Catalog items are included in your OS design. For more information, see Default Registry Settings.
The registry key name is HKEY_LOCAL_MACHINE\Comm\Pppoe1\Parms. The following table shows the named values for the PPPoE registry configuration parameters.
| Value : type | Description |
|---|---|
BusNumber : REG_DWORD |
Default set to 0. Specifies the bus number. |
BusType : REG_DWORD |
Default set to 0. Specifies the bus type. |
DisablePowerManagement : REG_DWORD |
Default set to 1. If this value is set to 1, power management is disabled, if this value is set to 0, power management is enabled. |
fAcceptAnyService : REG_DWORD |
Default set to 0. If this value is set to 0 (FALSE) and the Windows Embedded CE-enabled client device specifies a service name, the client will not connect to any other service name. If the client device does not specify a service name and the PPPoE Active Discovery Offer (PADO) packet contains a service name, the client device will refuse to connect to this Access Concentrator. |
MaxLines : REG_DWORD |
Default set to 1. Specifies the number of device lines. |
MaxSendPackets : REG_DWORD |
Default set to 30. Specifies the number of transmit buffers. |
Windows Embedded CE enables you to associate a device line with one or more adapter instances by using the registry. The following code example shows how to associate the "PPPoe Line 3" device line with a VMINI1 adapter instance.
[HKEY_LOCAL_MACHINE\Comm\PPPOE1\Parms]
"BusNumber"=dword:0
"BusType"=dword:0
"DisablePowerManagement"=dword:1
"MaxLines"=dword:3 ;
"MaxLines"=dword:3 ;
"MaxSendPackets"=dword:30 ;
"Line3"=multi_sz:"NE20001","PCI\\RTL81391","VMINI1" //Associates the "PPPoe Line 3" device with adapter instance VMINI1.