NETLOG Module
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/28/2008
This module manages and implements the Netlog tool for the Remote Configuration Framework. For more information, see Netlog.
The following table shows the configurable settings for NETLOG.
| Value : Type | Access | Index | Description |
|---|---|---|---|
USB : DWORD |
Read-write |
Not applicable |
If this value is set to 1, capturing over USB is enabled. |
Stopped : DWORD |
Read-only |
Not applicable |
If this value is set to 1, Netlog is stopped. |
LogName : STRING |
Read-only |
Not applicable |
Specifies the name of the log. |
PacketSize : DWORD |
Read-write |
Not applicable |
Specifies the maximum packet size captured, in bytes. |
HalfCaptureSize : DWORD |
Read-write |
Not applicable |
Specifies the maximum size of each of the two log files (netlog0.cap and netlog1.cap), in which Netlog stores logging data. |
Load : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is loaded. If this value is set to 0, Netlog is unloaded. |
Start : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is started. If this value is set to 0, Netlog is stopped. |
ClearLog : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is stopped, and the log is cleared. |