Share via

  • Article

Configure the platform for Groove Server Relay

 

Applies to: Groove Server 2010

Topic Last Modified: 2011-08-05

This article provides information and procedures for configuring the platform for Groove Server Relay.

In this article:

  • Before you begin

  • Configure Windows Server 2008 for Groove Server Relay

Before you begin

Before you start this procedure, install the Windows Server operating system with the necessary components, as described in Install the operating system for Groove Server Relay.

Configure Windows Server 2008 for Groove Server Relay

The following procedure provides guidance for configuring Windows Server 2008 to support the Groove Server Relay installation.

To correctly configure Windows Server 2008 for Groove Server Relay

  1. Address the requirements in Before you begin.

  2. Configure startup and recovery settings, as follows:

    1. Open the System Control Panel item, select Advanced system settings, and then click the Advanced tab.

    2. Select Startup and Recovery Settings and set properties as described in the following table, and then click OK:

    System startup and recovery settings Value

    Automatically restart

    On

    Crash Dump type

    Small memory dump (128 KB)

    Dump File

    %SystemRoot%\Minidump

    Overwrite any existing files

    On

  3. Configure performance settings, as follows:

    1. From the System Control Panel item, select Advanced system settings, click the Advanced tab. Then they click Performance Settings and set the following options:

      • On the Visual Effects tab, select Adjust for Best Performance.

      • On the Advanced tab, under Processor scheduling, select Adjust for best performance of: Background services.

    2. On the same Advanced tab, under Virtual Memory, click Change and set the virtual memory to be at least the size of the real memory available on your server, but no more than half the available free space on the system partition.

    3. Click OK.

  4. Set properties for each Windows Event Log, as follows:

    1. Click Start --> Program Files --> Administrative Tools, and open the Event Viewer program.

    2. To avoid loss of important event data, open each log and set its properties as shown in the following table:

    Windows Event Logs Properties

    Application log

    Maximum log size: 32000 KB

    Overwrite events as needed

    Security log

    Maximum log size: 32000 KB

    Overwrite events as needed

    System log

    Maximum log size: 32000 KB

    Overwrite events as needed

  5. Install the latest Windows service pack, obtainable from Microsoft Service Packs (https://go.microsoft.com/fwlink/p/?LinkId=93682&clcid=0x409).

  6. Install the latest Windows critical and security updates, obtainable from Microsoft Update (https://go.microsoft.com/fwlink/p/?LinkId=93684&clcid=0x409).

The server is now ready for the Groove Server Relay software installation.