Event ID 1388 or 1988: A lingering object is detected
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
If a destination domain controller logs event ID 1388 or event ID 1988, a lingering object has been detected and one of two conditions exists on the destination domain controller:
Event ID 1388: Inbound replication of the lingering object has occurred on the destination domain controller.
Event ID 1988: Inbound replication of the directory partition of the lingering object has been blocked on the destination domain controller.
Event ID 1388
This event indicates that a destination domain controller that does not have strict replication consistency enabled has received a request to update an object that does not reside in the local copy of the Active Directory database. In response, the destination domain controller has requested the full object from the source replication partner. In this way, a lingering object has been replicated ("reanimated") to the destination domain controller.
Important
When event ID 1388 occurs, if either the source domain controller (the replication partner that is outbound-replicating the lingering object) or the destination domain controller (the inbound replication partner that reports event ID 1388) is running Windows 2000 Server, you cannot use the Repadmin tool to remove lingering objects. For information about how to remove lingering objects in this case, see article 314282, "Lingering objects may remain after you bring an out-of-date global catalog server back online," on the Microsoft Web site at https://go.microsoft.com/fwlink/?LinkId=41410. The procedures and information in this article apply to the removal of lingering objects from global catalog servers as well as from domain controllers that are not global catalog servers.
The event text identifies the source domain controller and the outdated (lingering) object. An example version of the event text is as follows:
Event Type:Error
Event Source:NTDS Replication
Event Category:Replication
Event ID:1388
Date:2/21/2005
Time:9:19:48 AM
User:NT AUTHORITY\ANONYMOUS LOGON
Computer:DC3
Description:
Another domain controller (DC) has attempted to replicate into this DC an
object which is not present in the local Active Directory database. The
object may have been deleted and already garbage collected (a tombstone
lifetime or more has past since the object was deleted) on this DC. The
attribute set included in the update request is not sufficient to create
the object. The object will be re-requested with a full attribute set
and re-created on this DC.
Source DC (Transport-specific network address):
4a8717eb-8e58-456c-995a-c92e4add7e8e._msdcs.contoso.com
Object:
CN=InternalApps,CN=Users,DC=contoso,DC=com
Object GUID:
a21aa6d9-7e8a-4a8f-bebf-c3e38d0b733a
Directory partition:
DC=contoso,DC=com
Destination highest property USN:
20510
User Action:
Verify the continued desire for the existence of this object. To
discontinue re-creation of future similar objects, the following
registry key should be created.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Strict Replication Consistency
Event ID 1988
This event indicates that a destination domain controller that has strict replication consistency enabled has received a request to update an object that does not exist in its local copy of the Active Directory database. In response, the destination domain controller has blocked replication of the directory partition containing that object from that source domain controller. The event text identifies the source domain controller and the outdated (lingering) object. An example version of the event text is as follows:
Event Type:Error
Event Source:NTDS Replication
Event Category:Replication
Event ID:1988
Date:2/21/2005
Time:9:13:44 AM
User:NT AUTHORITY\ANONYMOUS LOGON
Computer:DC3
Description:
Active Directory Replication encountered the existence of objects
in the following partition that have been deleted from the local
domain controllers (DCs) Active Directory database. Not all direct
or transitive replication partners replicated in the deletion
before the tombstone lifetime number of days passed. Objects that
have been deleted and garbage collected from an Active Directory
partition but still exist in the writable partitions of other DCs
in the same domain, or read-only partitions of global catalog servers
in other domains in the forest are known as "lingering objects".
This event is being logged because the source DC contains a lingering
object which does not exist on the local DCs Active Directory database.
This replication attempt has been blocked.
The best solution to this problem is to identify and remove all
lingering objects in the forest.
Source DC (Transport-specific network address):
4a8717eb-8e58-456c-995a-c92e4add7e8e._msdcs.contoso.com
Object:
CN=InternalApps,CN=Users,DC=contoso,DC=com
Object GUID:
a21aa6d9-7e8a-4a8f-bebf-c3e38d0b733a
Cause
An object that has been permanently deleted from Active Directory (that is, its tombstone has been garbage-collected) remains on a domain controller. The domain controller failed to receive direct or transitive replication of the object deletion because it was disconnected (offline or experiencing an inbound replication failure) from the replication topology for a period that exceeded a tombstone lifetime. That object has been updated on the domain controller, causing a replication notification to the replication partner that an update is ready for replication. The replication partner has responded according to its replication consistency setting. This notification applies to attempted replication of a writable object. A copy of the writable lingering object might also exist on a global catalog server.
Solution
If replication of a lingering object has been detected, you can remove the object from Active Directory, along with any read-only replicas of the object, by identifying the domain controllers that might store this object (including global catalog servers) and running a repadmin command to remove lingering objects against these servers (repadmin /removelingeringobjects). This command is available on domain controllers that are running the version of Repadmin.exe that is included with Windows Support Tools in Windows Server 2003.
If the lingering object is present in a writable or read-only directory partition on a domain controller running Windows Server 2003 or Windows Server 2003 with Service Pack 1 (SP1), you can remove lingering objects by running the repadmin /removelingeringobjects command against that target domain controller.
To remove lingering objects, do the following:
Use the event text to identify the following:
Directory partition of the object
Source domain controller that attempted replication of the lingering object
Install Windows Support Tools on the domain controller that received the event, if necessary. See "Install Windows Support Tools" in Configuring a Computer for Troubleshooting Active Directory.
Use Repadmin to Identify the GUID of an Authoritative Domain Controller
Use Repadmin to Remove Lingering Objects
Enable Strict Replication Consistency, if necessary.
Use Repadmin to Identify the GUID of an Authoritative Domain Controller
To perform the procedure that removes lingering objects, you must identify the globally unique identifier (GUID) of an up-to-date domain controller that has a writable replica of the directory partition that contains the lingering object that has been reported. The directory partition is identified in the event message.
The object GUID of a domain controller is stored in the objectGUID attribute of the NTDS Settings object.
Requirements
Administrative credentials: To complete this procedure, you must be a member of the Domain Admins group in the domain of ServerName.
Tool: Repadmin.exe (Windows Support Tools)
To identify the GUID of a domain controller
At a command prompt, type the following command, and then press ENTER:
repadmin /showrepl ServerName
where ServerName is the name of the domain controller for which you want to display the GUID.
In the first section of the output, locate the objectGuid entry. Select and copy the GUID value into a text file so that you can use it elsewhere.
Use Repadmin to Remove Lingering Objects
If the destination domain controller and source domain controller are both running Windows Server 2003, you can remove lingering objects by using Repadmin. If either domain controller is running Windows 2000 Server, follow instructions in the article 314282, "Lingering objects may remain after you bring an out-of-date global catalog server back online," on the Microsoft Web site at https://go.microsoft.com/fwlink/?LinkId=41410.
Requirements
Operating system: Windows Server 2003 for ServerName and ServerGUID
Administrative credentials: To complete this procedure, you must be a member of the Domain Admins group in the DirectoryPartition domain.
Tool: Repadmin.exe (Windows Support Tools)
To use Repadmin to remove lingering objects
At a command prompt, type the following command, and then press ENTER:
repadmin /removelingeringobjects ServerName ServerGUID DirectoryPartition /advisory_mode
Term Definition ServerName
The name of the domain controller that has lingering objects, as identified in the event message (event ID 1388 or event ID 1988). You can use the Domain Name System (DNS) name or the distinguished name.
ServerGUID
The GUID of a domain controller that has an up-to-date writable replica of the directory partition that contains the lingering object
DirectoryPartition
The distinguished name of the directory partition that is identified in the event message. For example, DC=RegionalDomainName,DC=ForestRootDomainName,DC=com for a domain directory partition, CN=configuration,DC=ForestRootDomainName,DC=com for the configuration directory partition, or CN=schema,CN=configuration,DC=ForestRootDomainName,DC=com for the schema directory partition
/advisory_mode logs the lingering objects that will be removed so that you can review them, but it does not remove them.
Repeat step 1 without /advisory_mode to delete the identified lingering objects from the directory partition.
Repeat steps 1 and 2 for every domain controller that might have lingering objects.
Note
The ServerName parameter uses the DC_LIST syntax for repadmin, which allows the use of * for all domain controllers in the forest and gc: for all global catalog servers in the forest. To see the DC_LIST syntax, type repadmin /listhelp.
Enable Strict Replication Consistency
To ensure that lingering objects cannot be replicated if they occur, enable strict replication consistency on all domain controllers. The setting for replication consistency is stored in the registry on each domain controller. However, on domain controllers that are running Windows Server 2003 with SP1, you can use Repadmin to enable strict replication consistency on one or all domain controllers.
On domain controllers running Windows Server 2003, Windows 2000 Server with Service Pack 3 (SP3), or Windows 2000 Server with Service Pack 4 (SP4), you must edit the registry to enable the setting.
Use Repadmin to Enable Strict Replication Consistency
Requirements:
Operating system: Windows Server 2003 with SP1
Administrative credentials:
To complete this procedure on a single domain controller, you must be a member of the Domain Admins group.
To complete this procedure on all domain controllers in the forest, you must be a member of the Enterprise Admins group in the forest.
Tool: Repadmin.exe (Windows Support Tools that are included with Windows Server 2003 SP1)
To use Repadmin to enable strict replication consistency
Open a command prompt, type the following command, and then press ENTER:
repadmin /regkey DC_LIST +strict
where DC_LIST is the name of a single domain controller. (* applies the change to all domain controllers in the forest.) For the domain controller name, you can use the Domain Name System (DNS) name, the distinguished name of the domain controller computer object, or the distinguished name of the domain controller server object.
If you do not use * to apply the change to all domain controllers, repeat step 1 for every domain controller on which you want to enable strict replication consistency.
Note
For more naming options and information about the syntax of the DC_LIST parameter, at the command prompt, type repadmin /listhelp.
Edit the Registry to Enable Strict Replication Consistency
On a domain controller that is running Windows Server 2003 without a service pack, edit the registry to enable strict replication consistency. The setting for replication consistency is stored in the Strict Replication Consistency entry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters.
Values are as follows:
Value: 1 (0 to disable)
Default: 1 (enabled) in a new Windows Server 2003 forest; otherwise 0.
Data type: REG_DWORD
Requirements:
Operating system: Windows Server 2003, Windows 2000 Server with SP3, Windows 2000 Server with SP4
Administrative credentials: To complete this procedure, you must be a member of the Domain Admins group.
Tool: Registry editor (for example, Regedit.exe)
Warning
It is recommended that you do not directly edit the registry unless there is no other alternative. Modifications to the registry are not validated by the registry editor or by Windows before they are applied, and as a result, incorrect values can be stored. This can result in unrecoverable errors in the system. When possible, use Group Policy or other Windows tools, such as Microsoft Management Console (MMC), to accomplish tasks rather than editing the registry directly. If you must edit the registry, use extreme caution.
To edit the registry to enable strict replication consistency
Open a registry editor.
Navigate to Strict Replication Consistency entry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters.
Set the value in the Strict Replication Consistency entry to 1.
Ensure Strict Replication Consistency Is Enabled On Newly Promoted Domain Controllers
If you are upgrading a forest that was originally created using a computer running Windows 2000 Server, you should ensure that the forest is configured to enable strict replication consistency on newly promoted domain controllers to help avoid lingering objects. After you update the forest, all new domain controllers that you subsequently add to the forest are created with strict replication consistency disabled. However, you can implement a forest configuration change that causes new domain controllers to have strict replication consistency enabled. To ensure that new domain controllers that you add to the forest have strict replication consistency enabled, you can use Ldifde.exe to create an object in the configuration directory partition of the forest. This object is responsible for enabling strict replication consistency on any Windows Server 2003 domain controller that is promoted into the forest.
The object that you create is an operational GUID with the following name:
CN=94fdebc6-8eeb-4640-80de-ec52b9ca17fa,CN=Operations,CN=ForestUpdates,CN=Configuration,DC=<ForestRootDomain>
Perform the following procedure on any domain controller in the forest to add this object to the configuration directory partition.
Requirements:
Administrative credentials: To complete this procedure, you must be a member of the Domain Admins group.
Tools: Ldifde.exe, Notepad
To create the object that ensures strict replication consistency on new domain controllers
In a text editor such as Notepad, create the following text file:
dn:
CN=94fdebc6-8eeb-4640-80de-ec52b9ca17fa,CN=Operations,CN=ForestUpdates,CN=Configuration,DC=<ForestRootDomain>
changetype: add
objectClass: container
showInAdvancedViewOnly: TRUE
name: 94fdebc6-8eeb-4640-80de-ec52b9ca17fa
objectCategory: CN=Container,CN=Schema,CN=Configuration,DC=<ForestRootDomain>
Where <ForestRootDomain> contains all domain components (DC=) of the forest root domain. For example, for the contoso.com forest, DC=contoso,DC=com; for the fineartschool.net forest, DC=fineartschool,DC=net.
Open a Command Prompt as an administrator: On the Start menu, right-click Command Prompt, and then click Run as administrator. If the User Account Control dialog box appears, provide Enterprise Admins credentials, if required, and then click Continue.
At the command prompt, type the following command and then press ENTER:
ldife -i –f <Path\FileName>
Value Description -i
Specifies import mode. If not specified, the default mode is export.
-f
Identifies the import or export file name.
<Path\FileName>
The path and name of the import file that you created in step 1. For example, C:\ldifde.txt.
For information about using Ldifde, see LDIFDE on the Microsoft Web site (https://go.microsoft.com/fwlink/?LinkId=42656).