Share via

Event ID 35 — Supported Plug and Play Device Redirection

  • Article

Applies To: Windows Server 2008 R2

yellow

Terminal Services in Windows Server 2008 includes support for redirection of Windows Portable Devices, specifically media players based on the Media Transfer Protocol (MTP) and digital cameras based on the Picture Transfer Protocol (PTP), as well as devices that use Microsoft Point of Service (POS) for .NET 1.11.

When a user establishes a remote session with a Windows Server 2008 terminal server, the supported Plug and Play device attached to the user's local computer can be redirected and made available to the user in the remote session.

Note:  Microsoft POS for .NET device redirection is only supported if the terminal server is running an x86-based version of Windows Server 2008.

Event Details

Product: Windows Operating System
ID: 35
Source: Microsoft-Windows-TerminalServices-PnPDevices
Version: 6.1
Symbolic Name: EVENT_NOTIFY_MATCHING_DEVICE_NOT_FOUND
Message: Device %1 is not supported on this machine, a generic driver is loaded.

Resolve

Install a different driver for the device

To resolve this issue, install the driver provided by the device’s manufacturer. Check with the device’s manufacturer to determine if the driver has been updated to support device redirection in Terminal Services.

Note:  When a device is connected, an attempt is made to find a driver on the terminal server that exactly matches the hardware identification number of the device. If an exact match cannot be found, a generic driver, chosen based on the device's compatible ID, is loaded on the terminal server instead. The generic driver may provide only limited functionality for the device.

To install the driver from the device manufacturer on the terminal server, use either of the following methods.

To perform these procedures, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority.

Method one

Run the Setup program for the device to install the device’s driver .inf file on the terminal server.

Method two

To install the driver by using Device Manager:

  1. On the terminal server, open Device Manager. To open Device Manager, click Start, click Run, type devmgmt.msc, and then click OK.
  2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
  3. On the View menu, click Devices by connection.
  4. Locate the device under the User Mode Bus controller node.
  5. Right-click the name of the device, and then click Update Driver Software.
  6. Click Browse my computer for driver software.
  7. Specify the location of the driver from the device’s manufacturer, and then click Next.
  8. Follow the instructions to complete the update of the driver.

Verify

To verify that supported Plug and Play device redirection is working properly, use either of the following methods:

Method one

Establish a remote session with the terminal server and check that the redirected device is available and is functioning as expected.

Method two

Check the status of the device by using Device Manager.

To perform this procedure, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority.

To use Device Manager to check the status of the device:

  1. On the terminal server, open Device Manager. To open Device Manager, click Start, click Run, type devmgmt.msc, and then click OK.
  2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
  3. On the View menu, click Devices by connection.
  4. Locate the device under the User Mode Bus controller node.
  5. Double-click the device and verify that Device status indicates that the device is working properly.

Supported Plug and Play Device Redirection

Terminal Services