Share via


Read Text Log

 

Updated: May 13, 2016

Applies To: System Center 2012 SP1 - Orchestrator, System Center 2012 - Orchestrator, System Center 2012 R2 Orchestrator

The Read Text Log activity will read lines in a structured text log file. If you have log files that change names, you can configure the Read Text Log activity to read from the newest file in a folder that matches a file name pattern. The Read Text Log activity can be used to check a log for errors and then take corrective action on the server that is creating the log or send an email to an administrator to escalate the issue.

Important

For the Read Text Log activity to work correctly, every line in the text log file must begin with a timestamp.

Configuring the Read Text Log Activity

Before you configure the Read Text Log activity, you need to determine the following:

  • The log file name you are reading.

  • The timestamps format in the log.

Use the following information to configure the Read Text Log activity.

Details Tab

Settings Configuration Instructions
File Select and type the name of the log file that will be read. You can also use the ellipsis (...) button to browse for the file.
The most recent file in this folder Select and type the folder where the most recent file that matches the pattern that you specify will be read. You can also use the ellipsis (...) button to browse for the folder.
Matching this pattern Type the file name pattern that will be used to find the log file that will be read. You can use the * and ? wildcards to specify the pattern. These wildcards behave in the same way as the Windows Command Prompt.
Read Select and specify the dates that the lines you are reading are from:

 lines between the dates…: Select and specify the begin date and end date that make up the range that will be read. The dates that you specify must match the Timestamp format.

 lines more recent than…: Select and specify the oldest date of the logs that will be read. The date that you specify must match the entered Timestamp format.

 new lines: Select to read all the logs that have not previously been read by the Read Text Log activity.
Timestamp format Specify the format of the timestamp of the logs. For more information on how to specify the timestamp format, see the following Timestamp Format Codes table.
Read the last lines Enter the number of lines.

Timestamp Format Codes

Code Description
%y Year in two digits. For example, in this format '2005' would be represented as '05'.
%Y Year in four digits.
%m Month in two digits. For example, in this format 'September' would be represented as '09'.
%d Day in two digits.
%H Hour in two digits in the 24 hour format. For example, in this format '1 pm' would be represented as '13'
%M Minutes in two digits.
%S Seconds in two digits.
%s Milliseconds in three digits.

Here are some examples of dates and their corresponding timestamp format.

Date Format
03/26/2010 14:07:46 %m/%d/%Y %H:%M:%S
[03/26/2010] [14:07:46] [%m/%d/%Y] [%H:%M:%S
15-11-10 02:09:45:056 %d-%m-%y %H:%M:%S:%s

Published Data

The following table lists the published data items.

Item Description
Full path and name of the log file The full path of the log file that is being read.
Number of lines matching the condition The number of lines that were read.
For each line read
Full line matching the filter, including timestamp The entire line as it appears in the log file.
Timestamp of matching line The timestamp of the line that was read.
Message of matching line The log message of the line that was read.