Share via

How to: Create Load Test Performance Reports Using Microsoft Excel

  • Article

This topic applies to:

Visual Studio Ultimate

Visual Studio Premium

Visual Studio Professional 

Visual Studio Express
Topic applies Topic does not apply Topic does not apply Topic does not apply

You can generate Microsoft Excel load test reports that are based on two or more test results. Two types of load test reports are available:

  • Run comparison   This creates a set of reports that compares the data from two load test results using tables and bar charts.

  • Trend   You can generate trend analysis on two or more load test results. The results are displayed using line charts, but the data is available in pivot tables.

Tip

You can also manually create Microsoft Word reports by copying and pasting data from the summary view, graphs view, and tables view. For more information, see How to: Manually Create a Load Test Performance Report Using Microsoft Word.

Either report can be used to share performance data with stakeholders and convey whether the overall performance and health of the system is getting better or worse.

Report definitions are stored in the load test database. When a report is saved, the definition for the report is saved in the database and can be re-used later.

Also, the Excel workbook can be shared with stakeholders so that stakeholders do not have to connect to the database to see the report.

Note

You can share the Excel workbook; however, only users who have Visual Studio 2010 Ultimate installed on their machine will be able to modify any of the spreadsheets. Other users will not see the Load Test Report option in the Office ribbon’s Load Test tab, but they will be able to view the workbook.

The following illustration is an example of a report that shows a correlation between a decline in transaction (Update Cart) speed and the degeneration of the (% Processor) counter. This points to a potential problem in the application code, instead of the database or network, and is a good candidate to diagnose by using the ASP.NET Profiler. For more information about using the ASP.NET profiler, see Profiling ASP.NET Load Tests.

Potential problem in the application code

Excel reports can either be generated in the Load Test Analyzer, by using the Create Excel Report button in the toolbar, or from Excel by using the Load Test Report option in the Load Test tab of the Office ribbon.

Note

If you add comments to a load test, they will appear in the Excel report. For more information, see How to: Add Comments While Analyzing a Completed Load Test Using the Load Test Analyzer and How to: Add a Comment to a Running Load Test Using the Load Test Analyzer.

Warning

If you install Visual Studio 2010 Service Pack 1, then you must install Microsoft Office 2010 Service Pack 1 in order for Microsoft Excel reporting to continue functioning correctly. Similarly, installing Microsoft Office 2010 Service Pack 1 requires you to install Visual Studio 2010 Service Pack 1. If you do not install both of the service packs, the Load Test tab will not appear in the Office ribbon for Microsoft Excel.

To generate load test comparison reports using Excel

  1. Before you generate a report, you must first run a load test. For more information, see Running Load Tests.

  2. You can create Excel load test reports in two ways:

    1. After you complete a load test, in the Load Test Results page, click the Create Excel Report button in the toolbar.

      Note

      If the Create Excel Report button is disabled in the Web Performance Test Results Viewer toolbar, you may need to run Microsoft Excel one time before it is enabled. When Visual Studio 2010 Ultimate is installed, the Visual Studio 2010 Ultimate load test add-in is copied to your computer for Microsoft Excel; however, Microsoft Excel must be run to complete the installation process for the add-in.

    Microsoft Excel opens with the Generate a Load Test Report wizard.

    -or-

    1. Open Microsoft Excel, select the Load Test tab in the Office ribbon and then click Load Test Report.

      The Generate a Load Test Report wizard appears.

    2. In the Select database which contains load tests page, under Server name, type the name of the server that contains the load test results.

    3. In the Databasename drop-down list, select the database that contains the load test results.

  3. In the How do you want to generate your report page, verify that Create a report is selected and click Next.

  4. In the What type of report do you want to generate page, verify that Run comparison is selected and click Next.

  5. In the Enter load test report details page, type a name for your report in Report Name.

  6. Select the load test you want to generate the report for and click Next.

  7. In the Select the runs for your report page, under Select one or more runs to add to the report, select two load test results that you want to compare in the report and click Next.

    Note

    You can only generate a comparison report on two load test results. If you select either one load test result or more than two load test results, a warning message will appear.

  8. In the Select the counters for your report page, under Select on or more counters to add to the report an expandable list of counters is available to customize your report. By default, the following counters are selected for the report:

    • LoadTest:Page - Avg. Page Time

    • LoadTest:Request - Requests/Sec

    • LoadTest:Scenario - User Load

    • LoadTest:Test - Avg. Test Time

    • LoadTest:Test - Total Tests

    • LoadTest:Transaction - Avg. Response Time

    • LoadTest:Transaction - Total Transactions

    • Memory - Available MBytes

    • Network Interface - Bytes Total/sec

    • PhysicalDisk - %Idle Time

    • Process - %Processor Time

    • Processor %Processor Time

    Select the counters that you want to compare from the two selected test runs in the report and click Finish.

  9. The Excel workbook report is generated with the following spreadsheet tabs:

    • Table of Contents - Displays the load test report name and provides a table of contents with links to the various tabs in the report.

    • Runs - Provides details on which two runs are being compared in the report.

    • Test Comparison - Provides bar graph details on performance regressions and improvements between the two runs being compared.

    • Page Comparison - Provides bar graph and percentage performance comparison data between the two runs on the various pages in the test runs.

    • Machine Comparison - Provides comparison data between the two runs based on the machines that were used.

    • Error Comparison - Compares the error types encountered between the two runs and the number of occurrences.

    Tip

    For better reports several properties are available in load tests and Web performance tests that enable richer reports. The page request has two properties that are presented in the reports: Goal and Reporting Name. Page response times will be reported against goal, and the reporting name will be used instead of the URL in the reports. In a load test Run Settings, under Manage Counter Sets, the Computer Tags property is presented in the report machine names. This is very useful to describe the role of a particular machine in the report.

To generate load test trend reports using Excel

  1. Before you generate a report, you must run a load test. For more information, see Running Load Tests.

  2. You can create Excel load test reports in two ways:

    1. After you complete a load test, in the Load Test Results page, click the Create Excel Report button in the toolbar.

      Note

      If the Create Excel Report button is disabled in the Web Performance Test Results Viewer toolbar, you may need to run Microsoft Excel one time before it is enabled. When Visual Studio 2010 Ultimate is installed, the Visual Studio 2010 Ultimate load test add-in is copied to your computer for Microsoft Excel; however, Microsoft Excel must be run to complete the installation process for the add-in.

    Microsoft Excel opens with the Generate a Load Test Report wizard.

    -or-

    1. Open Microsoft Excel, select the Load Test tab in the Office ribbon and then click Load Test Report.

      The Generate a Load Test Report wizard appears.

    2. In the Select database which contains load tests page, under Server name, type the name of the server that contains the load test results.

    3. In the Databasename drop-down list, select the database that contains the load test results.

  3. In the How do you want to generate your report page, verify that Create a report is selected and click Next.

  4. In the What type of report do you want to generate page, verify that Trend is selected and click Next.

  5. In the Enter load test report details page, type a name for your report in Report Name.

  6. Select the load test you want to generate the report for and click Next.

  7. In the Select the runs for your report page, under Select one or more runs to add to the report, select the load test results that you want to compare in the report and click Next.

  8. In the Select the counters for your report page, under Select on or more counters to add to the report, an expandable list of counters is available to customize your report. By default, the following counters are selected for the report:

    • LoadTest:Page - Avg. Page Time

    • LoadTest:Request - Requests/Sec

    • LoadTest:Scenario - User Load

    • LoadTest:Test - Avg. Test Time

    • LoadTest:Test - Total Tests

    • LoadTest:Transaction - Avg. Response Time

    • LoadTest:Transaction - Total Transactions

    • LoadTest:Transaction - Transactions/Sec

    • Memory - Available MBytes

    • Network Interface - Bytes Total/sec

    • PhysicalDisk - %Idle Time

    • Process - %Processor Time

    • Processor %Processor Time

  9. From the selected test runs in the report, select the counters that you want to compare for trend analysis and click Finish.

  10. The report is generated with a table of contents that has links to the various Excel workbook tabs generated in the report. The links are based on the counters selected for the trend report. For example, if you left the default counters selected in step 7, then the report will generate data which is presented in separate tabs in Excel for each counter listed in step 7. The data that is generated for each counter is presented in trend-style graphs.

    Tip

    For better reports several properties are available in load tests and Web performance tests that enable richer reports. The page request has two properties that are presented in the reports: Goal and Reporting Name. Page response times will be reported against goal, and the reporting name will be used instead of the URL in the reports. In a load test Run Settings, under Manage Counter Sets, the Computer Tags property is presented in the report machine names. This is very useful to describe the role of a particular machine in the report.

Security

Load test results and reports contain potentially sensitive information that might be used to build an attack against your computer or your network. Load test results and reports contain computer names and connection strings. You should be aware of this when you share load test reports with other people.

See Also

Concepts

Load Test Analyzer Overview

Other Resources

Reporting Load Tests Results for Test Comparisons or Trend Analysis