Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This section provides reference information for RAMgmtPSProvider provider classes defined in RAMgmtPSProvider.mof and implemented in RAMgmtPSProvider.dll.
In this section
-
Retrieves Border Gateway Protocol (BGP) routing information about a path segment to an autonomous system (AS).
-
Retrieves the network configuration of a custom Border Gateway Protocol (BGP) network.
-
Retrieves the statistics of a Border Gateway Protocol (BGP) message.
-
Retrieves information about a peer configuration of a Border Gateway Protocol (BGP) router.
-
Contains BGP route-aggregation configuration information.
-
Retrieves counters for Border Gateway Protocol (BGP) routes.
-
Retrieves the configuration of a Border Gateway Protocol (BGP) route.
-
Contains BGP route-flap-dampening configuration information.
-
Retrieves the routing domain configuration of a Border Gateway Protocol (BGP) router.
-
Retrieves the policy configuration of a Border Gateway Protocol (BGP) router.
-
Retrieves BGP peering message and route advertisement statistics.
-
CIM_Error is a specialized class that contains information about the severity, cause, recommended actions and other data related to the failure of a CIM Operation. Instances of this type MAY be included as part of the response to a CIM Operation.
-
DirectAccess application server class
-
DirectAccess application server connection class.
-
DirectAccess Client class.
-
Direct Access Client DNS Configuration class
-
DirectAccess client entry point specific settings class
-
DirectAccess Client Settings class.
-
DirectAccess Domain Controller Settings class.
-
DirectAccess Entry Point Settings class.
-
DirectAccess Entry Point Base Settings object.
-
Changed host
-
Host information.
-
Extended host information
-
Management server class
-
DirectAccess Multi Site Settings class
-
DirectAccess Network Location Server settings
-
Describes the DirectAccess OTP settings.
-
DirectAccess Server Settings
-
DirectAccess Server Configuration
-
Remote Access DirectAccess Configuration.
-
Contains the global settings for the DNS Client Name Resolution Policy table.
-
Contains a table entry for a DNS client name resolution policy.
-
Represents the multi-tenant S2S GRE interface
-
Represents the S2S GRE interface
-
Represents an IP filter interface
-
A Windows error object that encapsulates what is in CIM_Error as well as includes error code, errorCategory, errorMessage and errorType.
-
Represents an IP address range in a routing domain on a multi-tenant VPN
-
Manages protocol metrics
-
Routing protocol preference
-
Holds the route aggregation properties of BGP routes.
-
Admin configured static routes.
-
Manages Border Gateway Protocol (BGP) sessions between peers.
-
Contains the BGP route flap dampening engine configuration.
-
Retrieves Border Gateway Protocol (BGP) routes from the local BGP routing table.
-
Manages a Border Gateway Protocol (BGP) router.
-
BGP routing policy management
-
Assigns BGP routing policies to BGP peers.
-
Retrieves Border Gateway Protocol (BGP) message and route statistics.
-
Represents the application servers in a DA deployment.
-
Refers to the properties of the connection made to the application servers and other servers in corpnet.
-
Represents the client machines in a DA deployment.
-
Represents all the name resolution configuration for a DirectAccess deployment.
-
Describes a entry point which belongs to a multisite deployment.
-
DAEntryPointDC Object.
-
Represents the Management Server configuration in a DirectAccess deployment.
-
Represents configuration of multisite environment.
-
Represents the Network Location Server configuration of the DirectAccess.
-
Describes the OTP authentication configuration for DirectAccess.
-
Represents the configuration specific to the DirectAccess server.
-
Manages IP filter actions for a Border Gateway Protocol (BGP) router interface.
-
Represents installation of both DirectAccess and VPN and configuration common to both.
-
Represents the various types of accounting supported for Remote Access.
-
Represents the remote access configuration.
-
Refers to the real-time connection stats and stats based on accounting data.
-
Refers to the summary of active (real-time) and accounting statistics for connections.
-
Health of Remote Access cluster, server (DA and VPN) and its components
-
Represents the configuration of the store used for inbox accounting.
-
Represents load balancing configuration for Remote Access.
-
Represents the servers in a load balancing cluster.
-
Represents the configuration of the accounting and authentication RADIUS servers
-
Manages Remote Access settings for routing domain configurations.
-
Refers to the resources in corpnet accessed by a user over a remote access connection
-
Manages routing protocol preferences.
-
Refers to various VPN authentication protocols.
-
Represent the authentication type for VPN
-
Represents IP address assignment configuration for VPN
-
Represents the IP address range from which IP addresses are assigned to VPN clients
-
Represents a site-to-site VPN interface.
-
Refers to statistics of an IKEv2 S2S connection.
-
Represents an Internet Protocol Security (IPsec) VPN server configuration.
-
Holds the SSTP Proxy configuration functions.
-
Provides a method to create a new traffic selector.
-
Indicates the user policy operations performed on VPN user
-
Remote Access Configuration
-
Remote Access Accounting Configuration
-
Remote Access Accounting Connection Record
-
Remote Access Connection Statistics Summary Record From Accounting Data
-
Manages a Border Gateway Protocol (BGP) Peer Connection State.
-
Describes the Remote Access common configuration.
-
Manages a Remote Access configuration
-
Remote Access Common Connection Info Record
-
Remote Access Connection Statistics Summary Record
-
Remote Access Core Configuration
-
Remote Access configuration consisting of the DirectAccess Configuration and the Remote Access common configuration
-
An extended error object that contains the error details of the RemoteAccess cmdlets. It inherits from the MSFT_WmiError and extends it by adding the following fields to the error object
-
Remote Access Health Heuristic
-
Remote Access Health Monitor
-
Remote Access Inbox Accounting Configuration Record
-
Remote Access Load Balancing configuration
-
Remote Access Load Balancer Node object
-
Remote Access Monitoring Connection Record
-
Remote Access Connection Statistics Summary Record From Monitoring Data
-
Remote Access Radius Accounting configuration Record
-
Manages a Remote Authentication Dial-In User Service (RADIUS) server configuration.
-
Represents a Remote Authentication Dial-In User Service (RADIUS) server
-
Contains the Name and Purpose of a Radius Server
-
A Remote Access routing domain configuration
-
Retrieves and Updates a Remote Access site-to-site (S2S) interface configuration.
-
The server authentication configuration for the Remote Access service
-
Remote Access User Activity object
-
Remote Access VPN configuration consisting of the Remote Access common configuration
-
Retrieves and updates a routing domain configuration for the Remote Access service.
-
Virtual Private Network Configuration
-
Virtual Private Network (VPN) authentication settings
-
Represents an authorization protocol for an site-to-site (S2S) VPN service.
-
Virtual Private Network (VPN) IP address assignment policy
-
Virtual Private Network (VPN) IP address range object
-
Represents a site-to-site (S2S) VPN multi-tenant configuration
-
Represents a site-to-site (S2S) VPN routing domain configuration
-
Represents a custom Internet Protocol Security (IPsec) configuration for a routing domain
-
Represents the default routing domain IPsec configuration
-
Represents the S2S VPN custom interface.
-
Represents the S2S VPN default interface.
-
Represents the S2S VPN interface.
-
Represents the VPN S2S interface statistics
-
Represents a custom site-to-site (S2S) VPN interface for a multi-tenant gateway.
-
Represents the default site-to-site (S2S) VPN interface for a multi-tenant gateway.
-
Retrieves statistics for a site-to-site (S2S) VPN interface to a multi-tenant gateway.
-
Represents a VPN server Internet Protocol Security (IPsec) configuration
-
Represents the VPN server custom IPsec configuration.
-
Represents the VPN server default IPsec configuration.
-
Configuration information for the BGP Router admin network
-
Describes the VPN traffic selector
-
The configuration of a Virtual Subnet ID (VSID).