Share via

Installing and Configuring Away Mode in Microsoft Windows XP Media Center Edition 2005

  • Article

 

Microsoft Corporation

March 2007

 

Applies to:

   Update Rollup 2 for Microsoft® Windows® XP Media Center Edition 2005

   Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005 Software Development Kit (SDK)

 

Summary: Away mode is a feature included in Update Rollup 2 for Microsoft® Windows® XP Media Center Edition 2005 that allows the computer to appear off to the user while it continues to perform tasks that do not require user input. This paper provides OEMs information on installing, uninstalling, and configuring Away mode on computers running Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. It also includes hardware and software requirements for implementing Away mode functionality.

 

Contents

Introduction

Installation

   BIOS Modifications

   Hardware and Software Check

   Operating System

   BIOS

   Hardware

   File List and Location

Uninstallation

   OEM Unattended Uninstallation

Configuration and Settings

   OEM Customization

   User Customization

Requirements for Away Mode Functionality

   CPU and Chipset Support Processor Performance Control

   Away Mode is Enabled as Default Off State for the HID Sleep Button

   BIOS Controls the Fan Speed

   Power Button is Connected to the System through USB 1.1

   Power Supply is Self-Cooling

   BIOS Defines Away Mode Device and ACPI Control Method

For More Information

Introduction

This article provides details on installing, uninstalling, and configuring Away mode on computers that are running Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. It also includes requirements for implementing Away mode functionality.

Away mode is a new feature included in Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005 that allows the computer to appear off to the user while it continues to perform tasks that do not require user input, such as recording television and viewing Media Center Extender sessions. When the user presses the sleep button on the computer or remote control, the computer goes into a lower power state called Away mode, instead of going into Standby mode. When the computer is in Away mode, the Away mode technology:

  • Turns off the video port for the main display (the monitor appears blank).
  • Mutes all audio output.
  • Filters the primary input devices (such as the mouse, keyboard, or remote control).
  • Puts the CPU into an adaptive power policy that may reduce system power
  • Provides a notification mechanism for hardware manufacturers to control system hardware functions, including:
    • Turning off the power light-emitting diode (LED).
    • Slowing down or stopping the fans.
  • Controls the behavior of Microsoft Windows XP Media Center Edition 2005 functions (such as stopping media playback).
  • Provides a notification mechanism for independent software vendors (ISVs) to control the behavior of software functions, including:
    • Stopping media playback.
    • Changing the status of real-time communication software (such as Microsoft MSN® Messenger) from Online to Away.
  • Instantly returns the computer to normal activity when media devices (universal serial bus [USB] flash memory, optical media) are detected or when the keyboard or mouse are used.

Installation

Only licensed OEMs can pre-install Away mode. Away mode is not available for end-user installation or through Windows Update for computers that have been upgraded to Rollup 2 from previous versions of Windows XP Media Center Edition.

BIOS Modifications

Before you install Away mode on the computer, you must modify the basic input/output system (BIOS) first. If the BIOS is not modified, you will not be able to install Away mode and the following error message will display: "The environment is incorrect."

Please see the "Requirements for Away Mode Functionality" section of this document for BIOS requirements.

Away mode uses the Microsoft Update.exe technology to install a setup/uninstall package. The files are signed and rolled up in a CAB file (AwayMode-KB902437-nnn.exe, where nnn refers to the three-letter acronym for the language being installed) that is executed to initiate the setup process, which includes:

  • Checking the operating system, BIOS, hardware, and registry.
  • Copying the INF and DLL files, and installing the service and driver files.
  • Restarting the computer.

Before installing Away mode, perform the following tasks:

  1. Update BIOS object.
  2. Confirm that Microsoft Windows XP Media Center Edition 2005 is installed before you install Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005.
  3. Install Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005.

Hardware and Software Check

During Setup, the computer is checked for the correct operating system, the updated BIOS, and compatible hardware. After this check is complete, the product's End-User License Agreement (EULA) is displayed. Setup continues after the EULA is accepted.

Operating System

You can install Away mode only on computers running Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. If this version of the operating system is not detected, Setup cancels the installation and the following error message displays: "The environment is incorrect."

BIOS

Computers running Away mode must include an Advanced Configuration and Power Interface (ACPI) BIOS object (device). To confirm that the computer has this device, Setup queries the Windows device manager for the Away Mode Device (AWY0001).

Note   Windows Hardware Quality Lab (WHQL) does not currently have a systems logo program for Microsoft Windows XP Media Center Edition 2005 and only supports testing Hardware Compatibility Tests (HCTs) for Microsoft Windows XP Professional. The preferred process is to create a BIOS with the AWY0001 object disabled so the device does not appear during testing using Windows XP Professional. You can then update the BIOS to enable Away mode on computers that include both Microsoft Windows XP Media Center Edition 2005 and Away mode.

Hardware

Away mode has not been designed for mobile computers. If Setup detects a Microsoft ACPI-compliant control method battery, the installation is canceled and the following error message is displayed: "The environment is incorrect."

File List and Location

The Away mode files are copied to the locations on the hard disk that are listed in the following table.

Location File List
Windows INF directory

(all INF files)

 Arpolicy.inf

Arhidfltr.inf

Aracpi.inf

Armoufiltr.inf

Arkbfiltr.inf
Windows directory

(service, Control Panel, and other DLL files)

 Arservice.exe

Arpower.dll

Armcex.dll

Arpwrmsg.exe
Windows\system32\drivers

(driver files)

 Arpolicy.sys

Arhidfltr.sys

Aracpi.sys

Armoufiltr.sys

Arkbfiltr.sys

After the files are copied, the INF files install the drivers (Aracpi.sys, Arhidfltr.sys, Arpolicy.sys, Armoufiltr.sys, and Arkbfiltr.sys). After the drivers are installed, Setup starts the Away Mode Service (Arservice.exe) with the following command:

net start ARSVC

Restart

To confirm that all of the enabled Away mode components function properly, Setup prompts for a restart. There is also an option to do the restart later after all additional features or applications are installed.

Away mode is activated by default when the computer is restarted.

Unattended Installation

Install Away mode in an unattended mode by using the following command syntax:

AwayMode-KB902437-xxx.exe /quiet or AwayMode-KB902437-xxx.exe /passive

/quiet—Setup runs without prompting the user; no UI is displayed.

/passive—Setup runs without prompting the user; progress bar is displayed.

Uninstallation

The OEM can uninstall Away mode automatically. Note that unattended uninstallation cannot be performed if Away mode was installed using the /NoBackup option.

OEM Unattended Uninstallation

To automate the uninstallation of Away mode, run the following command in a command window:

C:\Windows\$NtUnistallAWAYMODE160$\spuninst\spuninst.exe

The uninstall executable (spuninst.exe) is installed in a special directory (<windir>\$NtUninstallAWAYMODE160$\spuninst) during Setup.

Uninstall Away mode in unattended mode by running the following command in a command window:

C:\Windows\$NtUninstallAWAYMODE160$\spuninst\spuninst.exe /quiet

To confirm that the drivers have been removed successfully, restart the computer.

Note   Users can remove Away mode from their computer by using Add or Remove Programs.

Configuration and Settings

The OEM can customize Away mode using the following values. Note that the user can perform some basic customization as well.

OEM Customization

When Away mode is installed on the computer that is running Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005, the following key is created in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ARSVC\Parameters

You can change the default settings by adjusting the values listed in the following table.

Feature Options Create Dword Value Comments
Disable the Away mode feature "Disable" = dword:  00000000 Default = 0; enables Away mode by default

Configurable by OEMs and users
Put the CPU into an adaptive power policy (to conserve power) when the computer is Away "NoThrottle" = dword:  00000000 Default = 0; enables CPU throttling by default

Configurable by OEMs only
Keep the computer in Away mode when media is inserted "NoWakeOnInsert" = dword:  00000000 Default = 0; enables device insertion wake by default

Configurable by OEMs only
Return the computer from Away mode on keyboard or mouse activity "WakeOnMouseKB" = dword:  00000000 Default = 0; disables keyboard/mouse wake by default

Configurable by OEMs and users
Require the user to enter a password when the computer returns from Away mode "PromptForPassword" = dword: 00000000 Default = 0; disables password prompt by default

Configurable by OEMs and users

User Customization

The user can change some of the default settings on the Away tab in the Power Options Properties for Away mode, as shown in the following figure.

Power options properties for Away mode

Requirements for Away Mode Functionality

When implementing Away mode on a computer, the following requirements or recommendations apply. Away mode is not designed for mobile systems and therefore all requirements or recommendations are not applicable to mobile systems.

Recommendations: Implementing Away Mode Functionality

CPU and Chipset Support Processor Performance Control

The CPU and associated chipset should be capable of supporting processor performance control, enabling the CPU to enter a low-power, but fully-functional mode when the system is in Away mode.

Away Mode is Enabled as Default Off State for the HID Sleep Button

Away mode should be enabled as the default off state for the HID sleep button and configured through the power options in the Control Panel.

BIOS Controls the Fan Speed

The system BIOS should be responsible for controlling the fan speed of the power supply, processor, and system when the system transitions to and from Away mode.

Requirements: Implementing Away Mode Functionality

Power Button is Connected to the System through USB 1.1

Computers supporting Away mode must include a power button that is connected to the system through USB 1.1 or later as a human interface device (HID) sleep button. You can satisfy this requirement through the remote control or sleep button on the keyboard.

Power Supply is Self-Cooling

The power supply must be capable of properly cooling itself when the system is in a silent (Away mode) state.

Note   In the event that a thermal condition occurs in the power supply, the thermal firmware in the power supply must first turn on the fans to the lowest setting to bring thermals down to an acceptable level. As thermals increase, fan speeds may increase as necessary to control thermals.

BIOS Defines Away Mode Device and ACPI Control Method

The OEM-provided BIOS must define the Away mode device and ACPI control method in the ACPI namespace as follows:

// Define Away Mode device Device(\AWY){ Name(_HID, "AWY0001") // Away Mode device

The OEM-provided BIOS must implement the Away mode Set Mode (SMOD) control method. The SMOD control method notifies the BIOS that the computer is entering or leaving Away mode, enabling the BIOS to control aspects of the computer such as fan speed or the LED. Define the method as follows:

Method(SMOD,1) { Mode = 1: ON Mode = 0: Away

For More Information

Web addresses can change, so you might be unable to connect to the Web site or sites mentioned here.