Share via


Windows CE Boot Loader Output for the NEC Solution Gear 2-Vr4131 Development Kit (Windows CE 5.0)

Send Feedback

This is the output for the Windows CE boot loader:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 16
 2004 20:35:26
Microsoft Windows CE Loader 2.0 for NEC SG2_Vr4131 Built Apr 16 2004 at 19:51:08
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
Am79c973: Wait for link... Link detected
INFO: Boot device uses MAC 00:00:4c:80:2a:a0
INFO: *** Device Name SG2X10912 ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 10.199.14.145
Got Response from DHCP server, IP address: 10.199.14.145

ProcessDHCP()::DHCP IP Address Resolved as 10.199.14.145, netmask: 255.255.252.0
Lease time: 691200 seconds
Got Response from DHCP server, IP address: 10.199.14.145
No ARP response in 2 seconds, assuming ownership of 10.199.14.145
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the configuration menu, you see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 16
 2004 20:35:26
Microsoft Windows CE Loader 2.0 for NEC SG2_Vr4131 Built Apr 16 2004 at 19:51:08
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...

--------------------------------------------------------------------------------
 Main Menu
--------------------------------------------------------------------------------
 [1] Show Current Settings
 [2] Set Device Id
 [3] Select Boot Device
 [4] Select Debug Device
 [5] Network Settings
 [6] Save Settings
 [0] Exit and Continue

 Selection:

See Also

Downloading the Boot Loader to the NEC Solution Gear 2-Vr4131 Development Kit

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.