Share via


Sample CEPC Setup

Other versions of this page are also available for the following:

Windows Mobile Not SupportedWindows Embedded CE Supported

8/27/2008

You can use this sample CEPC setup as a basis for setting up your CEPC. The configuration of your CEPC may vary depending on the features you want to evaluate.

The following table shows the sample CEPC setup.

Component Description

10BaseT Ethernet card

Required for Ethernet downloading and debugging.

3.5-inch floppy disk drive

Required for creating a boot floppy disk.

For more information, see Creating a Boot Floppy Disk for an x86 SDB.

IDE hard disk drive

Required for persistent storage.

3.3 V Memory

64 MB PC100 or PC133

Required.

x86 microprocessor

Required.

Motherboard

Required.

PC Card reader

Optional.

Power supply suitable for your microprocessor and motherboard

Required.

Serial ports

COM1 for debug serial output.

COM2 for run-time image download.

Recommended for serial debug output. COM1 reports serial debug output. For more information, see Configuring HyperTerminal for BSPs.

Required for run-time image download if you do not have an Ethernet card. COM2 is the default serial port to use for run-time image download.

USB controller

Optional.

32 MB video card

Required.

**The non-Microsoft software and hardware referenced in these documents are included for illustrative purposes only. Illustrations that use such third-party software and hardware as examples are not intended to be an endorsement or recommendation of any of these products. We provide this information only as a convenience for our customers for purposes of explaining a practical application and do not provide warranties of any kind, whether express, implied, or statutory, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

See Also

Tasks

How to Set Up a CEPC

Concepts

Ethernet Connection Options

Other Resources

How-to Topics