Prerequisites for the PC Card 16-Bit PCMCIA Host Controller Driver Test
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
The following tables show the hardware requirements for the PC Card 16-Bit PCMCIA Host Controller Driver Test.
| Requirement | Description |
|---|---|
PC Card slot |
One or more onboard slots or slots provided by PCI-based PC Card host controller cards. .gif "Bb203094.note(en-US,WinEmbedded.60).gif") Note:
32-bit (Cardbus) slots are acceptable for this test
|
PC Card |
Any workable card or cards. To test multiple functions, prepare a real multifunction card (that is, a card that reports more than one function, such as a socket dual I/O card). Note:
Do not use 32-bit (Cardbus) cards for this requirement
|
The following tables show the software requirements for the PC Card 16-Bit PCMCIA Host Controller Driver Test.
| Requirement | Description |
|---|---|
Tux.exe |
Test harness, required for test execution |
Kato.dll |
Logging engine, required for logging data |
PCC16bitTest.dll |
Test library |
PCC_dummydr.dll |
Dummy driver for PC Cards. |
Ktux.dll |
Helper library to load test library into kernel mode |