Share via

Boot Loader Output for the Marvell PXA27x Processor Development Kit (MainstoneIII) (Windows Embedded CE 6.0)

  • Article

1/5/2010

The following example shows the boot loader output for the Marvell PXA27x Processor Development Kit (MainstoneIII).

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Nov  3
 2005 10:24:54
Microsoft Windows CE Ethernet Bootloader 1.11 for the Marvell MainstoneIII Develop
ment Platform Built Oct 30 2005

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 0 seconds. INFO: Trying to initialize the built-in
SMSC NIC...
LAN91Cxxx: Chip Id 9 Revision 1
INFO: SMSC LAN91C111 Ethernet controller initialized.
INFO: MAC address: 0-2-B3-0-C5-68
System ready!
Preparing for download...
INFO: Using device name: 'MAINSTN50536'
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.54

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.54, netmask: 255.255.255.0
Lease time: 345600 seconds
Got Response from DHCP server, IP address: 192.168.0.54
No ARP response in 2 seconds, assuming ownership of 192.168.0.54
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the configuration menu, you see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Nov  3
 2005 10:24:54
Microsoft Windows CE Ethernet Bootloader 1.11 for the Marvell MainstoneIII Develop
ment Platform Built Oct 30 2005

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 2 seconds.

EBoot Loader Configuration:

0) IP address: 192.168.0.54
1) Subnet mask: 0.0.0.0
2) Boot delay: 3 seconds
3) DHCP: (Enabled)
4) Reset to factory default configuration
5) RNDIS MAC address: 0-0-0-0-FF-FF
6) Download new image at startup
7) Boot device order: SMSC -> USB-> PCMCIA0 -> PCMCIA1
8) Debug serial port: BTUART
D) Download image now
L) Launch existing flash resident image now
U) Boot to ULDR: (No)


Enter your selection:

See Also

Tasks

How to Use the BSP for the Marvell PXA27x Processor Development Kit (MainstoneIII)