Share via

Windows Embedded CE Boot Loader Output for the TI OMAP5912 Aruba Board (Windows Embedded CE 6.0)

  • Article

1/5/2010

This is the output for the Windows Embedded CE boot loader:

Serial Port Initialized
FLASH based boot.
Supervisor mode boot case.

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Apr 18 2006 20:19:12
Microsoft Windows CE EBOOT 1.0 for OMAP5912 ArubaBoard Built Apr 18 2006 at 20:20:43
System ready!
Preparing for download...
INFO: Entered OEMPreDownload....
WARN: Boot config wasn't found, using defaults
Hit space to enter ArubaBoard bootloader menu......
HostMiniInit:: !!
Rndis:: initialization: with addr=FFFB4000
Rndis:: Address static map to addr=FFFB4000
Rndis:: initialization!
Rndis:: PDDInit Success!
Rndis:: Get MAC address 200,95B3,D800
RndisMdd:: PDD's max RX buffer = [8192] bytes.
Rndis:: initialization: Success
HostMini:: New filter set: [0x0] --> [0x20]
HostMini:: New filter set: [0x20] --> [0x0]
HostMini:: New filter set: [0x0] --> [0x2]
HostMini:: New filter set: [0x2] --> [0xB]
HostMini:: New filter set: [0xB] --> [0x2]
HostMini:: New filter set: [0x2] --> [0xB]
HostMini:: New filter set: [0xB] --> [0x2B]
INFO: Boot device uses MAC 00:02:b3:95:00:d8
INFO: *** Device Name Aruba-D80095B3 ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.214

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.214, netmask: 255.255.255.0
Lease time: 691200 seconds
Got Response from DHCP server, IP address: 192.168.0.214
No ARP response in 2 seconds, assuming ownership of 192.168.0.214
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the configuration menu, you see the following output:

------------------------------------------------------------------
 ArubaBoard Main Menu
------------------------------------------------------------------
 [1] Bootloader Shell
 [2] Show Current Settings
 [3] Select Boot Device
 [4] Select Debug Device
 [5] Network Settings
 [6] Save Settings
 [0] Exit and Continue

 Selection:

See Also

Tasks

How to Use the BSP for the TI OMAP5912 Aruba Board
Downloading the Boot Loader to the TI OMAP5912 Aruba Board