Ceddk.dll DMA Functions (Compact 2013)
3/26/2014
The following table shows the Ceddk.dll direct memory access (DMA) functions.
Function |
Description |
|---|---|
This function prepares the system for a DMA operation on behalf of the target device and also returns a handle that can be used by DMAIssueTransfer. |
|
This function cancels an active DMA transfer. |
|
This function is called after DMA is finished and frees all the resources that were allocated by DMAOpenBuffer It also calls DMAFlushBlockBuffer before it returns. |
|
This function closes a DMA transfer and releases all related resources. |
|
This function frees a DMA channel buffer allocated by DMAAllocateChannel, along with all the resources the DMA channel uses. |
|
This function manually flushes the DMA buffer block in order to regain cache coherency. |
|
This function is used to return the length and physical address of a DMA buffer block created by DMAOpenBuffer. |
|
This function is returns the length and physical address of a DMA buffer block created by DMAOpenBuffer. |
|
This function retrieves the Context1 and Context2 values of a DMA transfer object. These values are set by functions such as DMAIssueTransfer during the creation of a DMA transfer object. |
|
This function gets the current status of an active or queued DMA transfer. |
|
This function queues multiple DMA transfer requests. Much like DMAIssueTransfer, if there are no other DMA transfer queued in the DMA channel, this function sets up map descriptor registers for a channel to map the first DMA transfer from a locked-down buffer. |
|
This function sets up map descriptor registers for a channel to map a DMA transfer from a locked-down buffer. This function fails if there are other DMA transfers queued in the DMA channel. |
|
This function sets up map descriptor registers for a channel to map a DMA transfer from a locked-down buffer. If there are other DMA transfers queued in the DMA channel this transfer is queued as well. |
|
This function is used to map a virtual buffer to a physical DMA block. |
|
This function controls hardware mapped DMA transfers directly, unless the transfer is already completed or is not queued. |
|
This function puts a DMA transfer into auto start mode. |
|
This function is used to start a subordinate DMA transfer that uses an associated memory block. |
|
This function allocates memory, locks it down, and maps it so that it is simultaneously accessible from the processor and a device for DMA operations. |
|
This function frees a common buffer allocated by HalAllocateCommonBuffer, along with all resources the buffer uses. |
|
This function translates a physical system address to a logical bus address, which can be passed to a bus controller, for example, a DMA bus controller. |