Share via

OID_DOT11_CHANNEL_AGILITY_ENABLED (Compact 2013)

  • Article

3/26/2014

When queried, this OID requests that the miniport driver return the value of the IEEE 802.11b dot11ChannelAgilityEnabled management information base (MIB) object for the current PHY type on the 802.11 station.

This MIB object specifies whether the current PHY type has enabled channel agility. For more information about channel agility, refer to Clause 18 of the IEEE 802.11b‑1999 standard and Clause 19 of the IEEE 802.11g‑2003 standard.

The data type for this OID is a BOOLEAN value. A value of TRUE indicates that the current PHY type has enabled channel agility.

The dot11ChannelAgilityEnabled MIB object is valid for the following PHY types only:

  • High-Rate Direct-sequence spread spectrum (HRDSS) PHY
  • Extended Rate PHY (ERP)

If the current PHY type is not set to dot11_phy_type_hrdsss or dot11_phy_type_erp, the miniport driver must fail the query request by returning NDIS_STATUS_INVALID_DATA from its MiniportOidRequest function.

If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID MIB object. This MIB object specifies the index of the current PHY type within the 802.11 station’s list of supported PHY types. For more information about the msDot11CurrentPhyID, see OID_DOT11_CURRENT_PHY_ID.

Requirements

Header

windot11.h

See Also

Reference

NDIS 5.x Legacy Wireless LAN OIDs
MiniportOidRequest
OID_DOT11_CURRENT_PHY_ID
Native 802.11 MIB OIDs
NDIS 5.x Legacy Reference