Share via


waveOutSetPitch (Windows Embedded CE 6.0)

1/6/2010

This function sets the pitch of a waveform output device.

Syntax

MMRESULT waveOutSetPitch(
  HWAVEOUT hwo, 
  DWORD dwPitch 
); 

Parameters

  • hwo
    Handle to the waveform-audio output device.
  • dwPitch
    Specifies a new pitch multiplier setting. This setting indicates the current change in pitch from the original authored setting. The pitch multiplier must be a positive value.

    The pitch multiplier is specified as a fixed-point value. The high-order word contains the signed integer part of the number, and the low-order word contains the fractional part. A value of 0x8000 in the low-order word represents one-half, and 0x4000 represents one-quarter. For example, the value 0x00010000 specifies a multiplier of 1.0 (no pitch change), and a value of 0x000F8000 specifies a multiplier of 15.5.

Return Value

One of the values described in the following table is returned.

Value Description

MMSYSERR_NOERROR

Success.

MMSYSERR_INVALHANDLE

Specified device handle is invalid.

MMSYSERR_NODRIVER

No device driver is present.

MMSYSERR_NOMEM

Unable to allocate or lock memory.

MMSYSERR_NOTSUPPORTED

Function is not supported.

Remarks

Changing the pitch does not change the playback rate or the sample rate, nor does it change the playback time. Not all devices support pitch changes. To determine whether the device supports pitch control, use the WAVECAPS_PITCH flag to test the dwSupport member of the WAVEOUTCAPS structure (filled by the waveOutGetDevCaps function).

Requirements

Header mmsystem.h
Library coredll.lib
Windows Embedded CE Windows CE 2.0 and later

See Also

Reference

Waveform Audio Functions