Share via


LINEBUSYMODE (Windows CE 5.0)

Send Feedback

These bit-flag constants describe different busy signals that the switch or network can generate. These busy signals typically indicate that a different resource that is required to make a call is currently in use.

The following table shows the LINEBUSYMODE constants.

Value Description
LINEBUSYMODE_STATION = 0x00000001 The busy signal indicates that the called party's station is busy. This is usually signaled with a normal busy tone.
LINEBUSYMODE_TRUNK = 0x00000002 The busy signal indicates that a trunk or circuit is busy. This is usually signaled with a fast busy tone.
LINEBUSYMODE_UNKNOWN = 0x00000004 The busy signal's specific mode is currently unknown but may become known later.
LINEBUSYMODE_UNAVAIL = 0x00000008 The busy signal's specific mode is unavailable and will not become known.

Remarks

The high-order 16 bits can be assigned for device-specific extensions. The low-order 16 bits are reserved.

**Note   **Busy signals can be sent as inband tones or out-of-band messages. TAPI makes no assumption about the specific signaling mechanism.

Requirements

OS Versions: Windows CE 3.0 and later.
Header: Tapi.h.

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.