Share via

Windows CE Boot Loader Output for the SMDK2410 Samsung MCU Development Kit

  • Article

The following text shows the Windows CE boot loader output for the SMDK2410 Samsung MCU Development Kit.

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Dec  3
 2002 01:36:13
Copyright (c) 2000-2001  Microsoft Corporation
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 1.3 Built Dec
4 2002

WARNING: OEMPlatformInit: Failed to initialize Smart Media.

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 0 seconds.

Starting auto-download ...
CS8900: MAC Address: 0:0:F0:51:A3:EC
INFO: Probe: CS8900 is detected.
INFO: Init: CS8900_Init OK.
System ready!
Preparing for download...
INFO: Using device name: 'SMDK241041964'
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 10.199.12.113
Got Response from DHCP server, IP address: 10.199.12.113

ProcessDHCP()::DHCP IP Address Resolved as 10.199.12.113, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 10.199.12.113
No ARP response in 2 seconds, assuming ownership of 10.199.12.113
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
.
.
.

If you press the SPACEBAR to break into the configuration menu, you will see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Dec  3
 2002 01:36:13
Copyright (c) 2000-2001  Microsoft Corporation
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 1.3 Built Dec
4 2002

WARNING: OEMPlatformInit: Failed to initialize Smart Media.

Press [ENTER] to download now or [SPACE] to cancel.

Initiating image download in 4 seconds.

Ethernet Boot Loader Configuration:

0) IP address: 0.0.0.0
1) Subnet mask: 0.0.0.0
2) Boot delay: 5 seconds
3) DHCP: Enabled
4) Reset to factory default configuration
5) Download new image at startup
6) Program RAM image into Smart Media Card: Disabled
7) Program CS8900 MAC address
8) Boot device order: CS8900 -> PCMCIA
9) Low-level format the Smart Media card
D) Download image now
L) Launch existing flash resident image now

Enter your selection:

See Also

How to Use the BSP for the SMDK2410 Samsung MCU Development Kit

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.