Windows CE Boot Loader Output for the AMD DBAu1000 Development Board (Windows CE 5.0)
This is the output for the Windows CE boot loader:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built May 4
2004 02:52:04
Microsoft Windows CE Loader 2.0 for AMD DBAu1000 Built May 4 2004 at 02:53:04
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
Au1 MAC: Wait for link... Link detected
INFO: Boot device uses MAC 00:00:1a:18:d1:18
INFO: *** Device Name MERLOT53528 ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.96
ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.96, netmask: 255.255.255.0
Lease time: 604800 seconds
Got Response from DHCP server, IP address: 192.168.0.96
No ARP response in 2 seconds, assuming ownership of 192.168.0.96
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
If you press the SPACEBAR to break into the Configuration menu, you see the following output:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built May 4
2004 02:52:04
Microsoft Windows CE Loader 2.0 for AMD DBAu1000 Built May 4 2004 at 02:53:04
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
--------------------------------------------------------------------------------
Main Menu
--------------------------------------------------------------------------------
[1] Show Current Settings
[2] Set Device Id
[3] Set Au1 MAC 0 address
[4] Set Au1 MAC 1 address
[5] Select Boot Device
[6] Select Debug Device
[7] Network Settings
[8] Save Settings
[0] Exit and Continue
Selection:
See Also
How to Use the BSP for the AMD DBAu1000 Development Board
Send Feedback on this topic to the authors