Share via


Windows CE Boot Loader Output for the AMD DBAu1500 Development Board (Windows CE 5.0)

Send Feedback

This is the output for the Windows CE boot loader:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 6

2004 18:36:22

Microsoft Windows CE Loader 2.0 for AMD DBAu1500 Built Apr 6 2004 at 18:37:21

System ready!

Preparing for download...

INFO: Predownload....

INFO: Boot configuration found at 0x9fc60000

Hit space to enter configuration menu 5...

Hit space to enter configuration menu 4...

Hit space to enter configuration menu 3...

Hit space to enter configuration menu 2...

Hit space to enter configuration menu 1...

Au1 MAC: Wait for link... Link detected

INFO: Boot device uses MAC 00:00:1a:18:d5:6e

INFO: *** Device Name ZINFANDEL54638 ***

InitDHCP():: Calling ProcessDHCP()

ProcessDHCP()::DHCP_INIT

Got Response from DHCP server, IP address: 192.168.0.120

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.120, netmask: 255.255.255.0

Lease time: 604800 seconds

Got Response from DHCP server, IP address: 192.168.0.120

No ARP response in 2 seconds, assuming ownership of 192.168.0.120

+EbootSendBootmeAndWaitForTftp

Sent BOOTME to 255.255.255.255

Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the Configuration menu, you see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr  6
 2004 18:36:22
Microsoft Windows CE Loader 2.0 for AMD DBAu1500 Built Apr  6 2004 at 18:37:21
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...

--------------------------------------------------------------------------------
 Main Menu
--------------------------------------------------------------------------------
 [1] Show Current Settings
 [2] Set Device Id
 [3] Set Au1 MAC 0 address
 [4] Set Au1 MAC 1 address
 [5] Select Boot Device
 [6] Select Debug Device
 [7] Network Settings
 [8] Save Settings
 [0] Exit and Continue

 Selection:

See Also

How to Use the BSP for the AMD DBAu1500 Development Board

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.