Share via


How to Use the BSP for the ARM Integrator AP SDB

You can use the sample board support package (BSP) provided by Platform Builder to quickly evaluate the new Windows CE .NET operating system (OS) features on the ARM Integrator AP standard development board (SDB).

For more information about the sample BSPs included in Platform Builder for ARM microprocessors, see ARM Board Support Packages.

Hardware and Software Assumptions

  • You included support for ARMV4I microprocessors when you installed Platform Builder 4.2. If you did not, reinstall Platform Builder.

    Note   The ARMV4I is an ARMV4 build that supports interworking, which enables the ARMV4I to handle 32-bit code to and from 16-bit code jumps. The ARMV4 kernel image is the same as the ARMV4I kernel image, except it does not support interworking. The ARMV4 kernel image is compatible with the Intel SA1100 StrongARM architecture. Once you select your choice of microprocessor support, all the necessary tools and code binaries needed to support the processor architecture are installed.

  • You are downloading a Windows CE OS image to an ARM Integrator AP SDB.

To track your progress in the following table, select the check box next to each step.

  Step Topic
1. From the New Platform Wizard, select support for the ARMV4I microprocessor. Creating a Platform
2. Review the supported hardware and software features on the SDB and familiarize yourself with any limitations that may impact your platform on the SDB. ARM Integrator AP SDB Supported Features
3. Set up the SDB. Setting Up the ARM Integrator AP SDB Hardware
4. Modify the switch and jumper settings on the SDB. Modifying the ARM Integrator AP SDB Switches and Jumpers
5. Configure the Microsoft HyperTerminal application to receive debug messages. Configuring HyperTerminal for BSPs
6. Build the platform. Building a Platform
7. Flash the Ethernet boot loader to the SDB. Flashing the Windows CE Boot Loader for the First Time on the ARM Integrator AP SDB
8. Download the OS image to the SDB. Downloading the OS Image to the ARM Integrator AP SDB

See Also

Supported Board Support Packages

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.