Win6_3MBN..GSM..TestWake..RegisterStateChange
The test verifies that the machine supports InstantGo. It does this by putting the machine into Connected Standby and waiting for register state change.
Test details
Associated requirements |
Device.Network.MobileBroadband.GSM.SupportWakeOnMB |
Platforms |
Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~10 minutes |
Categories |
Certification Functional |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Mobile Broadband Testing Prerequisites.
The test verifies that a register state change from the device will correctly wake the computer from Connected Standby. The test will put the machine into Connected Standby and wait for a register state change. The user is expected to trigger the register state change by blocking or stopping the signal.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Network Testing.
The common cause for failure is when the register state change occurs prematurely before the device is fully in Connected Standby.