DDraw Cubic
This automated test attempts to create a variety of valid and invalid cubic maps, and verifies the driver handles it properly. This test runs only if the driver supports cubic environment maps for three dimensions.
This topic applies to the following test jobs:
DDraw Cubic
DDraw Cubic (WoW64)
Test details
Associated requirements |
Device.Graphics.AdapterRender.MinimumDirectXLevel |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2 |
Expected run time |
~5 minutes |
Categories |
Certification Functional |
Type |
Automated |
Prerequisites
Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.
In addition, this test requires the following software:
Microsoft® DirectX® version 7.0 or later
Display adapter driver with DDraw capabilities
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Graphics Testing.
Turn off the screen saver and disable the power management before you run this test. Mode changes and full-screen applications can cause failures, so you should avoid them.
More information
Most of the Microsoft DirectDraw tests (including the DDraw AGP Memory test) are located in Fnddraw.exe. You can run Fnddraw.exe outside of the Display Compatibility Test (DCT) shell, and select initial tests. On the Tests menu, click Select Tests.
The test titles that are listed in the DCT shell do not directly match the test names in Fnddraw.exe. In fact, the names in the DCT often refer to a group of Fnddraw tests. You can obtain the Fnddraw test case names from the DCT log file.
You can pause many Fnddraw tests (especially blt-related tests) to give you time to visually analyze the blt results. Use the Pause key to pause and resume.
Use the Esc key to abort a test run. Be patient because some tests are more responsive than others.
Command syntax
| Command option | Description |
|---|---|
Fnddraw dd_cube.pro -l"fnswtt.dll" -r -c -p"m%MONITOR%" /WTTLogDevStr:$logfile |
This command runs both the DDraw Cubic (WoW64) test job and the DDraw Cubic (WoW64) test job. Replace the %MONITOR% parameter with a 1-based index that corresponds to the display that you are testing. |
File list
| File | Location |
|---|---|
Configdisplay.exe |
<[testbinroot]>\nttest\windowstest\tools\ |
Dd_cube.pro |
<[testbinroot]>\nttest\windowstest\graphics\d3d\conf\pro |
Fnddraw.exe |
<[testbinroot]>\nttest\windowstest\graphics\d3d\conf\ |
Fnswtt.dll |
<[testbinroot]>\nttest\windowstest\tools\ |
TDRWatch.exe |
<[testbinroot]>\nttest\windowstest\graphics\ |
Note
You do not need Fnswtt.dll to run this test. It is used only for Windows HCK logging.