Share via

ISDN\NvSave

  • Article

The ISDN\NvSave entry defines AT commands that are used to configure the ISDN modem for storage of the current configuration in NvRAM. This entry will always store ISDN\init and ISDN\SwitchType. Depending on the switch type, it may also store MSN, EAZs, SPIDs, and directory number.

Format

One or more command strings.

Examples

The following three examples demonstrate valid forms for this entry:

HKR, ISDN\NvSave,1,,"AT&W<cr>" 

HKR, ISDN\NvSave,1,,"AT&W<cr>" 
HKR, ISDN\NvSave,2,,"ATZ<cr>"

HKR, ISDN\NvSave,1,, "AT&W0<cr>"  
HKR, ISDN\NvSave,2,, "AT>W<cr>"    
HKR, ISDN\NvSave,3,, "ATZ0<cr>"  
HKR, ISDN\NvSave,4,, "AT>Z<cr>"

Remarks

As demonstrated by the samples, a multiline format can be used if it is required to cause the ISDN modem to reset the D channel and network.

The device has 10 seconds to recover from this reset or Unimodem will assume the device is failing to respond and return an appropriate error.

 

 

Send comments about this topic to Microsoft